矩形喷动床三维电容层析成像

doi:10.11949/j.issn.0438-1157.20180086

化工学报 ›› 2018, Vol. 69 ›› Issue (8): 3383-3389.DOI: 10.11949/j.issn.0438-1157.20180086

矩形喷动床三维电容层析成像

孙阳, 杨道业, 刘大震, 封文轩, 顾沐阳

南京工业大学电气工程与控制科学学院, 江苏南京 211816

收稿日期:2018-01-19 修回日期:2018-03-08 出版日期:2018-08-05 发布日期:2018-08-05
通讯作者: 杨道业
基金资助:
国家自然科学基金项目（51106070）；江苏省高校自然科学研究项目（15KJB530005）。

Three-dimensional electrical capacitance tomography in rectangular spouted bed

SUN Yang, YANG Daoye, LIU Dazhen, FENG Wenxuan, GU Muyang

College of Electrical Engineering and Control Science, Nanjing Tech University, Nanjing 211816, Jiangsu, China

Received:2018-01-19 Revised:2018-03-08 Online:2018-08-05 Published:2018-08-05
Supported by:
supported by the National Natural Science Foundation of China (51106070) and the Natural Science Foundation of the Jiangsu Higher Education Institutions (15KJB530005).

摘要/Abstract

摘要：

设计了32电极三维电容层析成像（ECVT）系统用于矩形喷动床内颗粒流动特性的研究。建立有限元仿真模型并计算灵敏场，对传感器特性进行仿真分析并成像验证了该灵敏场的准确性。搭建同尺寸的喷动床，应用32电极ECVT数据采集系统获取喷动床ECVT电极对间电容，选用线性反投影（LBP）算法重建床内三维介电常数分布。实验结果显示，研发的32电极ECVT系统可以有效地检测到喷动床内部颗粒从静止到循环运动全过程的规律性运动，从而为喷动床内部颗粒运动特性的研究提供了有效手段。

关键词: ECVT, 喷动床, 成像, 两相流, 灵敏场, LBP算法, 测量

Abstract:

A 32-electrode electrical capacitance volume tomography (ECVT) system was designed to investigate the characteristics of particles flow in rectangular spouted bed. To calculate the sensitive field, the finite element simulation model was established. The sensor characteristics were simulated and analyzed. The accuracy of sensitive field was verified by imaging. By making scale solid model, the capacitance of electrode couples attached around the model was carried out by using the system. Linear back projection (LBP) algorithm was adopted to reconstruct the distribution of three-dimensional dielectric constant in the bed. The results indicated that the 32-electrode ECVT system can detect the regular movement of particles from static to circular in the spouted bed effectively, which provided another effective method for the research of motion characteristics of particles in the spouted bed.

Key words: ECVT, spouted bed, tomography, two-phase flow, sensitivity map, LBP algorithm, measurement

中图分类号:

TB934

孙阳, 杨道业, 刘大震, 封文轩, 顾沐阳. 矩形喷动床三维电容层析成像[J]. 化工学报, 2018, 69(8): 3383-3389.

SUN Yang, YANG Daoye, LIU Dazhen, FENG Wenxuan, GU Muyang. Three-dimensional electrical capacitance tomography in rectangular spouted bed[J]. CIESC Journal, 2018, 69(8): 3383-3389.

参考文献 30

[1]	祝京旭, 洪江. 喷动床发展与现状[J]. 化学反应工程与工艺, 1997, 13(2):207-222. ZHU J X, HONG J. Development and current situation of spouted bed[J]. Chemical Reaction Engineering and Technology, 1997, 13(2):207-222.
[2]	MARNASIDO K G, VOUTETAKIS S S, TJATJOPOULOS G J, et al. Catalytic partial oxidation of methane to synthesis gas in a pilot-plant-scale spouted-bed reactor[J]. Chemical Engineering Science, 1999, 54(15):3691-3699.
[3]	ZHANG H, LIU M L, LI T J, et al. Experimental investigation on gas-solid hydrodynamics of coarse particles in a two-dimensional spouted bed[J]. Powder Technology, 2017, 307:175-183.
[4]	ALTZIBAR H, ESTIATI I, LOPEZ G, et al. Fountain confined conical spouted beds[J]. Powder Technology, 2017, 312:334-346.
[5]	何玉荣, 陆慧林, 刘文铁, 等. 喷动床内气固两相流体动力行为的数值模拟[J]. 化工学报, 2004, 55(2):290-296. HE Y R, LU H L, LIU W T, et al. Numerical simulation of hydrodynamic behavior in spouted beds[J]. Journal of Chemical Industry and Engineering(China), 2004, 55(2):290-296.
[6]	OLAZAR M, AGUADO R, BILBAO J, et al. Pyrolysis of sawdust in a conical spouted-bed reactor with a HZSM-5 catalyst[J]. AIChE Journal, 2000, 46(5):1025-1033.
[7]	李斌, 于洋, 马梦祥, 等. 三维喷动床内异径干湿颗粒混合特性数值模拟[J]. 化工学报, 2017, 68(12):4545-4555. LI B, YU Y, MA M X, et al. Numerical simulation of mixing different sized wet and dry particles in three-dimensional spouted bed[J]. CIESC Journal, 2017, 68(12):4545-4555.
[8]	MLECZKO L, MARSCHALL K J. Performance of an internally circulating fluidized-bed reactor for the catalytic oxidative coupling of methane[J]. Canadian Journal of Chemical Engineering, 1997, 75(3):610-619.
[9]	金涌, 祝京旭, 汪展文, 等. 流态化工程原理[M]. 北京:清华大学出版社, 2000:10-14. JIN Y, ZHU J X, WANG Z W, et al. Principle of Fluidization Engineering[M]. Beijing:Tsinghua University Press, 2000:10-14.
[10]	YANG S L, LUO K, FANG M M, et al. Influences of operating parameters on the hydrodynamics of a 3-D spout-fluid bed based on DEM modeling approach[J]. Chemical Engineering Journal, 2014, 247:161-173.
[11]	SAIDI M, TABRIZI H B, GRACE J R, et al. Hydrodynamic investigation of gas-solid flow in rectangular spout-fluid bed using CFD-DEM modeling[J]. Powder Technology, 2015, 284:355-364.
[12]	WEBER J M, MEI J S. Bubbling fluidized bed characterization using electrical capacitance volume tomography(ECVT)[J]. Powder Technology, 2013, 242:40-50.
[13]	WEBER J M, LAYFIELD K J, ESSENDELFT D T V, et al. Fluid bed characterization using electrical capacitance volume tomography (ECVT), compared to CPFD software's barracuda[J]. Powder Technology, 2013, 250:138-146.
[14]	WANG F, YU Z, MARASHDCH Q, et al. Horizontal gas and gas/solid jet penetration in a gas-solid fluidized bed[J]. Chemical Engineering Science, 2010, 65(11):3394-3408.
[15]	陈德运, 高明, 宋蕾, 等. 一种新型的三维ECT传感器及三维图像重建方法[J]. 仪器仪表学报, 2014, 35(5):961-968. CHEN D Y, GAO M, SONG L, et al. Novel 3D ECT sensor and its 3D image reconstruction method[J]. Chinese Journal of Scientific Instrument, 2014, 35(5):961-968.
[16]	YANG W Q, PENG L H. Image reconstruction algorithms for electrical capacitance tomography[J]. Measurement Science and Technology, 2002, 14(1):R1-R13.
[17]	LI N, CAO M C, HE C F, et al. Multi-parametric indicator design for ECT sensor optimization used in oil transmission[J]. IEEE Sensors Journal, 2017, 17(7):2074-2087.
[18]	CHANDRASEKERA T C, LI Y, MOODY D, et al. Measurement of bubble sizes in fluidised beds using electrical capacitance tomography[J]. Chemical Engineering Science, 2015, 126:679-687.
[19]	YANG S L, LUO K, FANG M M. Discrete element study of solid circulating and resident behaviors in an internally circulating fluidized bed[J]. Chemical Engineering Journal, 2014, 248:145-157.
[20]	PENG L H, MERKUS H, SCARLETT B. Using regularization methods for image reconstruction of electrical capacitance tomography[J]. Particle and Particle Systems Characterization, 2000, 17(3):96-104.
[21]	ABASCAL J F, ARRIDGE S R, ATKINSON D, et al. Use of anisotropic modelling in electrical impedance tomography:description of method and preliminary assessment of utility in imaging brain function in the adult human head[J]. NeuroImage, 2008, 43(2):258-268.
[22]	王化祥, 唐磊, 崔自强. 油/气两相流高速电容层析成像可视化系统电学层析成像[J]. 中国电机工程学报, 2009, 29(5):61-65. WANG H X, TANG L, CUI Z Q. A high-speed ECT visualization system for oil/gas two-phase flow[J]. Proceedings of the CSEE, 2009, 29(5):61-65.
[23]	WANG A, MARASHDEH Q, MOTIL B J, et al. Electrical capacitance volume tomography for imaging of pulsating flows in a trickle bed[J]. Chemical Engineering Science, 2014, 119:77-87.
[24]	LIAO A M, ZHOU Q Y, ZHANG Y. Application of 3D electrical capacitance tomography in probing anomalous blocks in water[J]. Journal of Applied Geophysics, 2015, 117:91-103.
[25]	KIMOTO A, NAKATANI T, MATSUOKA Y, et al. Reconstruction of temperature patterns in the cylindrical head model from electrical capacitance tomography[J]. IEEE Transaction on Instrumentation and Measurement, 2005, 54(6):2407-2411.
[26]	李虎, 杨道业, 程明霄. 螺旋表面极板电容式传感器的灵敏场分析[J]. 化工学报, 2011, 62(8):2292-2297. LI H, YANG D Y, CHENG M X. Sensitivity analysis of capacitance sensor with helical shaped surface plates[J]. CIESC Journal, 2011, 62(8):2292-2297.
[27]	YANG W Q, SPINK D M, YORK T A, et al. An image-reconstruction algorithm based on Landweber's iteration method for electrical capacitance tomography[J]. Measurement Science and Technology, 1999, 10(11):1065-1069.
[28]	DYAKOWSKI T, EDWARDS R B, XIE C G, et al. Application of capacitance tomography[J]. Chemical Engineering Science, 1997, 52:2099-2110.
[29]	WANG H G, QIU G Z, YE J M, et al. Experimental study and modelling on gas-solid flow in a lab-scale fluidised bed with Wurster tube[J]. Powder Technology, 2016, 300:14-27.
[30]	DEB S, TAFTI D. Investigation of flat bottomed spouted bed with multiple jets using DEM-CFD framework[J]. Powder Technology, 2014, 254:387-402.

矩形喷动床三维电容层析成像

Three-dimensional electrical capacitance tomography in rectangular spouted bed

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 30

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周绍华, 詹飞龙, 丁国良, 张浩, 邵艳坡, 刘艳涛, 郜哲明. 短管节流阀内流动噪声的实验研究及降噪措施[J]. 化工学报, 2023, 74(S1): 113-121.
[2]	江河, 袁俊飞, 王林, 邢谷雨. 均流腔结构对微细通道内相变流动特性影响的实验研究[J]. 化工学报, 2023, 74(S1): 235-244.
[3]	金伟其, 吴月荣, 王霞, 李力, 裘溯, 袁盼, 王铭赫. 化工园区工业气体泄漏气云红外成像检测技术与国产化装备进展[J]. 化工学报, 2023, 74(S1): 32-44.
[4]	肖明堃, 杨光, 黄永华, 吴静怡. 浸没孔液氧气泡动力学数值研究[J]. 化工学报, 2023, 74(S1): 87-95.
[5]	温凯杰, 郭力, 夏诏杰, 陈建华. 一种耦合CFD与深度学习的气固快速模拟方法[J]. 化工学报, 2023, 74(9): 3775-3785.
[6]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[7]	袁佳琦, 刘政, 黄锐, 张乐福, 贺登辉. 泡状入流条件下旋流泵能量转换特性研究[J]. 化工学报, 2023, 74(9): 3807-3820.
[8]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[9]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[10]	仪显亨, 周骛, 蔡小舒, 蔡天意. 光纤后向动态光散射测量纳米颗粒的浓度适用范围研究[J]. 化工学报, 2023, 74(8): 3320-3328.
[11]	高燕, 伍鹏, 尚超, 胡泽君, 陈晓东. 基于双流体喷嘴的磁性琼脂糖微球的制备及其蛋白吸附性能探究[J]. 化工学报, 2023, 74(8): 3457-3471.
[12]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.
[13]	郭雨莹, 敬加强, 黄婉妮, 张平, 孙杰, 朱宇, 冯君炫, 陆洪江. 稠油管道水润滑减阻及压降预测模型修正[J]. 化工学报, 2023, 74(7): 2898-2907.
[14]	高金明, 郭玉娇, 鄂承林, 卢春喜. 一种封闭罩内顺流多旋臂气液分离器的分离特性研究[J]. 化工学报, 2023, 74(7): 2957-2966.
[15]	何宣志, 何永清, 闻桂叶, 焦凤. 磁液液滴颈部自相似破裂行为[J]. 化工学报, 2023, 74(7): 2889-2897.