压缩空气A类泡沫水平管路压降实验及数值模拟

doi:10.11949/j.issn.0438-1157.20180226

化工学报 ›› 2018, Vol. 69 ›› Issue (10): 4184-4193.DOI: 10.11949/j.issn.0438-1157.20180226

压缩空气A类泡沫水平管路压降实验及数值模拟

王勇凯¹, 高红¹, 宋波², 林全生¹, 夏建军²

1. 天津大学化工学院, 天津 300350;
2. 公安部天津消防研究所, 天津 300381

收稿日期:2018-03-02 修回日期:2018-07-07 出版日期:2018-10-05 发布日期:2018-10-05
通讯作者: 宋波
基金资助:
天津市科技计划重点项目（16YFZCSF00510）；建筑消防工程技术公安部重点实验室开放课题项目（KFKT2015ZD04）。

Experimental study and numerical simulation of laminar flow of compressed air class A foam in horizontal pipe

WANG Yongkai¹, GAO Hong¹, SONG Bo², LIN Quansheng¹, XIA Jianjun²

1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, China;
2. Tianjin Fire Research Institute of MPS, Tianjin 300381, China

Received:2018-03-02 Revised:2018-07-07 Online:2018-10-05 Published:2018-10-05
Supported by:
supported by the Tianjin Municipal Science and Technology Support Project (16YFZCSF00510) and the Key Laboratory of Building Fire Protection Engineering and Technology of MPS (KFKT2015ZD04).

摘要/Abstract

摘要：

压缩空气A类泡沫是具有非平衡自组织结构的两相可压缩非牛顿流体，针对不同发泡倍数的泡沫特性进行水平管路压降实验及数值模拟研究。泡沫具有良好的压缩性能，其内部压力随着压缩体积的增加呈指数型增长，并在1 MPa的实验压力下可保持结构稳定而不发生泡沫破碎。泡沫属于非牛顿流体，具有剪切变稀的性质，其黏度流变行为符合Herschel-Bulkley模型。综合考虑其压缩性能及黏度变化，运用Fluent数值模拟软件针对不同发泡倍数的泡沫在水平管路中的层流流动进行模拟，并通过实验检验其压降模拟结果的可靠性，结果表明其误差可控制在10%以内，模拟方法具有一定的准确性。

关键词: 泡沫, 非牛顿流体, 黏度, 数值模拟

Abstract:

Compressed air class A foam is a two-phase compressible non-Newtonian fluid with unbalanced self-organization structure. Numerical simulation of laminar flow of compressed air class A foam was studied. Foam with various expansion ratio could be used in different practical engineering. For the sake of guarantee on the reliability of the simulation, it is necessary to study on the compressibility and the rheological property of compressed air class A foam. As one kind of compressible fluid, the internal pressure of foam surges exponentially with the increase of the compression on the volume. In the process of compression, foam with different expansion ratio could keep stable without coalescence and breakage. In addition, foam with various expansion ratio has property of shear thinning while rheological behavior of foam satisfies with the model of Herschel-Bulkley. Taking the above factors into consideration, the numerical simulation software named Fluent was used to simulate the laminar flow of foam with various expansion ratio in the horizontal circular pipe of which the diameter is 15 mm and 25 mm. The pressure drop gradually increases with the flow process of the fluid when diameter of pipe is 15 mm. The downward trend of pressure in the pipe with diameter of 25 mm is relatively slow, while the pressure drop per meter is approximate to the fixed value. Verified by the experiment of foam transportation in pipe, this method possesses reliability and accuracy in a certain degree. The deviation of simulation could be controlled within 10%.

Key words: foam, non-Newtonian fluids, viscosity, numerical simulation

中图分类号:

TQ569

王勇凯, 高红, 宋波, 林全生, 夏建军. 压缩空气A类泡沫水平管路压降实验及数值模拟[J]. 化工学报, 2018, 69(10): 4184-4193.

WANG Yongkai, GAO Hong, SONG Bo, LIN Quansheng, XIA Jianjun. Experimental study and numerical simulation of laminar flow of compressed air class A foam in horizontal pipe[J]. CIESC Journal, 2018, 69(10): 4184-4193.

参考文献 32

[1]	陆强, 包志明, 陈涛, 等. A类泡沫灭火剂灭火性能试验研究[J]. 消防科学与技术, 2013, (2):177-179. LU Q, BAO Z M, CHEN T, et al. Experimental study on the performance of class A foam in extinguishing class A fires[J]. Fire Science and Technology, 2013, (2):177-179.
[2]	傅学成, 包志明, 陈涛, 等. 压缩空气泡沫的隔热防护性能研究[J]. 消防科学与技术, 2009, 28(3):204-207. FU X C, BAO Z M, CHEN T, et al. Study on heat exposure protection of foam produced by compressed air foam systems[J]. Fire Science and Technology, 2009, 28(3):204-207.
[3]	LI H Q, QIAO Q Y, CUI W B. Experimental study of compressed air foam system and its foam rheology[J]. Forestry Studies in China, 2001, 3(1):66-70.
[4]	初迎霞, 王海明, 乔启宇, 等. 压缩空气泡沫系统在林火扑救中的应用[J]. 林业机械与木工设备, 2004, 32(8):33-36. CHU Y X, WANG H M, QIAO Q Y, et al. The application of compressed-air foam systems in extinguishing forest fire[J]. Forestry Machinery & Wood Working Equipment, 2004, 32(8):33-36.
[5]	MINAMI K, SHOHAM O. Pigging dynamics in two-phase flow pipelines:experiment and modeling[J]. International Journal of Multiphase Flow, 1995, 22(1):145-146.
[6]	JÄSBERG A, SELENIUS P, KOPONEN A. Experimental results on the flow rheology of fiber-laden aqueous foams[J]. Colloids & Surfaces A Physicochemical & Engineering Aspects, 2014, 473:147-155.
[7]	TAITEL Y, SHOHAM O, BRILL J P. Simplified transient solution and simulation of two-phase flow in pipelines[J]. Chemical Engineering Science, 1989, 44(6):1353-1359.
[8]	BERNICOT M F, DROUFFE J M. A slug-length distribution law for multiphase transportation systems[J]. SPE Production Engineering, 1991, 6(2):166-170.
[9]	HENAU V D, RAITHBY G D. A transient two-fluid model for the simulation of slug flow in pipelines(Ⅰ):Theory[J]. International Journal of Multiphase Flow, 1995, 21(3):335-349.
[10]	BENDIKSEN K, MAINES D, MOE R, et al. The dynamic two-fluid model OLGA:theory and application[J]. SPE Production Engineering, 1991, 6(6):171-180.
[11]	彭杰伟, 马有福, 吴恒亮, 等. 水平管内多孔板后的气液两相流型可视化实验[J]. 化工学报, 2017, 68(6):2266-2274. PENG J W, MA Y F, WU H L, et al. Visualization study on flow pattern of gas-liquid two-phase flowing through multi-orifice plate in horizontal pipe[J]. CIESC Journal, 2017, 68(6):2266-2274.
[12]	刘鑫, 张煜, 张丽, 等. 基于气泡群相间作用力模型的加压鼓泡塔流体力学模拟[J]. 化工学报, 2017, 68(1):87-96. LIU X, ZHANG Y, ZHANG L, et al. Hydrodynamics simulation of pressurized bubble column based on bubble swarm interphase force models[J]. CIESC Journal, 2017, 68(1):87-96.
[13]	SUN X, LIANG X, WANG S, et al. Experimental study on the rheology of CO2 viscoelastic surfactant foam fracturing fluid[J]. Journal of Petroleum Science & Engineering, 2014, 119(3):104-111.
[14]	杜东兴, 张娜, 孙芮, 等. 泡沫薄膜液在变径管内的流变学特性[J]. 化工学报, 2016, 67(S1):181-185. DU D X, ZHANG N, SUN R, et al. Foam lamellae flow rheology in converging-diverging tubes[J]. CIESC Journal, 2016, 67(S1):181-185.
[15]	杜东兴, 马新军, 张发虎, 等. 泡沫薄膜液在直管内的流变学特性[J]. 化工学报, 2014, 65(S1):194-198. DU D X, MA X J, ZHANG F H, et al. Rheology characteristics for foam lamellae flow in a straight tube[J]. CIESC Journal, 2014, 65(S1):194-198.
[16]	刘通义, 刘磊. CO2泡沫压裂液在裂缝中的两相流动研究[J]. 钻井液与完井液, 2006, 23(1):55-57. LIU T Y, LIU L.Study on two-phase flow of CO2 foam fracturing fluid in fissures[J]. Drilling Fluid & Completion Fluid, 2006, 23(1):55-57.
[17]	BLAUER R E, MITCHELL B J, KOHLHAAS C A. Determination of laminar, turbulent, and transitional foam flow losses in pipes[C]//SPE California Regional Meeting. Soc. Pet. Eng., 1974:spe-4885.
[18]	DESHPANDE N S, BARIGOU M. The flow of gas-liquid foams through pipe fittings[J]. International Journal of Heat & Fluid Flow, 2001, 22(1):94-101.
[19]	葛晓霞, 高健, 赵昊. 压缩空气泡沫管内流动特性分析[J]. 消防科学与技术, 2016, 35(10):1408-1411. GE X X, GAO J, ZHAO H, Analysis of compressed air foam flow characteristics[J]. Fire Science and Technology, 2016, 35(10):1408-1411.
[20]	REVELLIN R, THOME J R. Adiabatic two-phase frictional pressure drops in microchannels[J]. Experimental Thermal & Fluid Science, 2007, 31(7): 673-685.
[21]	李兆敏, 李松岩, 尚朝辉, 等. 泡沫流体层流射流的数值模拟[J]. 钻井液与完井液, 2007, 24(1):58-60. LI Z M, LI S Y, SHANG Z H, et al. Numerical simulation of foam fluids laminar jet flow[J]. Drilling Fluid & Completion Fluid, 2007, 24(1):58-60.
[22]	林全生, 张猛, 宋波, 等. 压缩空气A类泡沫在水平管道内流动研究[J]. 消防科学与技术, 2017, (9):1265-1268. LIN Q S, ZHANG M, SONG B, et al. Research on compressed air foam of class A flow in horizontal pipe by Fluent[J]. Fire Science and Technology, 2017, (9):1265-1268.
[23]	HU D F, HUANG Z L, SUN J Y, et al. Numerical simulation of gas-liquid flow through a 90° duct bend with a gradual contraction pipe[J]. Journal of Zhejiang University-Science A, 2017, 18(3):212-224.
[24]	SUPA-AMORNKUL S, STEWARD F R, LISTER D H. Modeling two-phase flow in pipe bends[J]. Journal of Pressure Vessel Technology, 2005, 127(2):204-209.
[25]	杨琳琳. 低倍数泡沫与中倍数泡沫在油库消防灭火中的比较[J]. 化工与医药工程, 2008, 29(5):6-9. XIA L L. Comparison of functions of low and medium foamy liquids in fire extinguishing for oil stackhouse[J]. Pharmaceutical & Engineering Design, 2008, 29(5):6-9.
[26]	ROUHANI S Z, SOHAL M S. Two-phase flow patterns:a review of research results[J]. Progress in Nuclear Energy, 1983, 11(3):219-259.
[27]	贾旭宏, 贾乐强, 陈现涛. 海拔高度对水成膜泡沫灭火剂性能的影响[J]. 消防科学与技术, 2016, (4):556-558. JIA X H, JIA L Q, CHEN X T.Effect of the altitude on the property of AFFF[J]. Fire Science and Technology, 2016, (4):556-558.
[28]	GAO H, ZHANG M, XIA J J, et al. Time and surfactant types dependent model of foams based on the Herschel-Bulkley model[J]. Colloids & Surfaces A Physicochemical & Engineering Aspects, 2016, 509:203-213.
[29]	李松岩, 林日亿, 李兆敏, 等. 泡沫流体密度-压力-温度关系的实验研究[J]. 石油化工高等学校学报, 2008, 21(2):71-75. LI S Y, LIN R Y, LI Z M, et al. Measurement of density-pressure-temperature relation for foam fluid[J]. Journal of Petrochemical Universities, 2008, 21(2):71-75.
[30]	KRISTEN-HOCHREIN N, SCHELERO N, KLITZING R V. Effects of oppositely charged surfactants on the stability of foam films[J]. Colloids & Surfaces A Physicochemical & Engineering Aspects, 2011, 382(1/2/3):165-173.
[31]	BERGERON V, LANGEVIN D, ASNACIOS A. Thin-film forces in foam films containing anionic polyelectrolyte and charged surfactants[J]. Langmuir, 1996, 12(6):1550-1556.
[32]	VON KLITZING R. Effect of interface modification on forces in foam films and wetting films[J]. Advances in Colloid & Interface Science, 2005, 253:114-115.

压缩空气A类泡沫水平管路压降实验及数值模拟

Experimental study and numerical simulation of laminar flow of compressed air class A foam in horizontal pipe

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 32

相关文章 15

编辑推荐

Metrics

本文评价

[1]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[4]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[5]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[6]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[7]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[8]	刘爽, 张霖宙, 许志明, 赵锁奇. 渣油及其组分黏度的分子层次组成关联研究[J]. 化工学报, 2023, 74(8): 3226-3241.
[9]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[10]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[11]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[12]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[13]	黄可欣, 李彤, 李桉琦, 林梅. 加装旋转叶轮T型通道流场的模态分解[J]. 化工学报, 2023, 74(7): 2848-2857.
[14]	史方哲, 甘云华. 超薄热管启动特性和传热性能数值模拟[J]. 化工学报, 2023, 74(7): 2814-2823.
[15]	邢美波, 张中天, 景栋梁, 张洪发. 磁调控水基碳纳米管协同多孔材料强化相变储/释能特性[J]. 化工学报, 2023, 74(7): 3093-3102.