化工学报 ›› 2020, Vol. 71 ›› Issue (S1): 166-171.DOI: 10.11949/0438-1157.20191093

• 流体力学与传递现象 • 上一篇    下一篇

某型运输机飞行状态下冷凝器风道性能

张行1,3(),庞丽萍1(),王莹2,3   

  1. 1.北京航空航天大学航空科学与工程学院,北京 100191
    2.北京航空航天大学自动化科学与电气工程学院,北京 100191
    3.航空工业新乡航空工业(集团)有限公司,河南 新乡 453049
  • 收稿日期:2019-10-07 修回日期:2019-10-19 出版日期:2020-04-25 发布日期:2020-04-25
  • 通讯作者: 庞丽萍
  • 作者简介:张行(1986—),男,博士研究生,高级工程师,xiyuan86@163.com

Performance of condenser duct under flight condition of a certain transport aircraft

Hang ZHANG1,3(),Liping PANG1(),Ying WANG2,3   

  1. 1.School of Aeronautics and Engineering, Beihang University, Beijing 100191, China
    2.School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China
    3.Xinxiang Aviation Industry (Group) Co. , Ltd. , AVIC, Xinxiang 453049, Henan, China
  • Received:2019-10-07 Revised:2019-10-19 Online:2020-04-25 Published:2020-04-25
  • Contact: Liping PANG

摘要:

以某型运输机蒸发循环制冷系统用冷凝器为研究对象,分析了运输机与直升机、小型通航飞机蒸发循环制冷系统工作环境的区别,应用Star CCM+软件进行了仿真建模,通过对冷凝器风道的流体仿真分析,阐述了飞行状态下引起蒸发循环制冷系统压力故障的原因,在此基础上提出了冷凝器风道优化方案,并应用流体仿真分析的方法,验证了优化方案的有效性,最后在该运输机上进行了试飞验证。

关键词: 运输机, 传热, 冷凝器, 计算机模拟, 优化设计

Abstract:

The condenser used in evaporation circulation refrigeration system of a transport aircraft was studied. The difference of evaporation circulation refrigeration system working environment among transport aircraft, helicopter and small civil aviation aircraft was analyzed. Star CCM+ software was used for simulation modeling, through the fluid simulation analysis to the condenser air duct, the causes of the pressure failure of the evaporation circulation refrigeration system under the flight condition of the transport aircraft were described, the condenser air duct optimization scheme is put forward. Computational fluid dynamics (CFD) is used to verify the effectiveness of the optimization scheme. Finally, flight verification was carried out on the transport aircraft.

Key words: transport aircraft, heat transfer, condenser, computer simulation, optimal design

中图分类号: