结构参数对布置窄缝和挡板的微混合器内流体流动和混合的影响

doi:10.11949/j.issn.0438-1157.20150086

化工学报 ›› 2015, Vol. 66 ›› Issue (10): 3857-3865.DOI: 10.11949/j.issn.0438-1157.20150086

结构参数对布置窄缝和挡板的微混合器内流体流动和混合的影响

李艺凡, 夏国栋, 王军

北京工业大学环境与能源学院强化传热与过程节能教育部重点实验室, 北京 100124

收稿日期:2015-01-20 修回日期:2015-05-07 出版日期:2015-10-05 发布日期:2015-10-05
通讯作者: 夏国栋
基金资助:
国家自然科学基金项目(51176002);国家重点基础研究发展计划项目(2011CB710704);北京市自然科学基金项目(3142004)。

Effect of structural parameters on fluid flow and mixing characteristics in micromixer with gaps and baffles

LI Yifan, XIA Guodong, WANG Jun

Key Laboratory of Enhanced Heat Transfer and Energy Conservation Ministry of Education, School of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124, China

Received:2015-01-20 Revised:2015-05-07 Online:2015-10-05 Published:2015-10-05
Supported by:
supported by the National Natural Science Foundation of China (51176002), the National Basic Research Program of China (2011CB710704) and the Natural Science Foundation of Beijing (3142004).

摘要/Abstract

摘要：

基于混沌对流原理设计了一种布置窄缝和挡板结构的被动式微混合器,并采用三维数值模拟和可视化实验对该微混合器内流体流动与混合特性进行了研究。窄缝和挡板的共同作用使微混合器水平面内形成了扩展涡和分离涡,垂直流动方向的截面内形成了对称的反向旋涡,多维度涡系显著提高了混合效率。窄缝和挡板的结构尺寸对流体流动和混合有重要影响。综合考虑混合强度和压降,利用场协同原理分析窄缝宽度、窄缝长度、挡板高度对微混合器综合性能的影响并得到了不同Reynolds数条件下的最优结构参数。

关键词: 微尺度, 混合, 场协同原理, 结构优化, 数值模拟

Abstract:

A passive micromixer with gaps and baffles was proposed based on the principle of chaotic mixing and the fluid flow and mixing characteristics in the micromixer were studied by three-dimensional numerical simulation and visualization experiment. Expanded vortices and separated vortices were generated in the horizontal plane and counter-rotating vortices formed in the cross-sectional plane perpendicular to the flow direction by the combination of gaps and baffles. The mixing efficiency was significantly improved by the multidirectional vortices. The geometrical parameters of gaps and baffles had great effect on the fluid flow and mixing. Based on the consideration of mixing efficiency and pressure drop, the effect of gap width, gap length and baffle height on the comprehensive performance of the micromixer was investigated by the field synergy principle. The optimal structural parameters were presented with varying Reynolds number.

Key words: microscale, mixing, field synergy principle, structural optimization, numerical simulation

中图分类号:

TQ027.1

李艺凡, 夏国栋, 王军. 结构参数对布置窄缝和挡板的微混合器内流体流动和混合的影响[J]. 化工学报, 2015, 66(10): 3857-3865.

LI Yifan, XIA Guodong, WANG Jun. Effect of structural parameters on fluid flow and mixing characteristics in micromixer with gaps and baffles[J]. CIESC Journal, 2015, 66(10): 3857-3865.

参考文献 20

[1]	Li Y, Xu F, Liu C, Xu Y, Feng X, Liu B F. A novel microfluidic mixer based on dual-hydrodynamic focusing for interrogating the kinetics of DNA-protein interaction [J]. Analyst, 2013, 138: 4475-4482.
[2]	Hardt S, Drese K S, Hessel V, Schönfeld F. Passive micromixers for applications in the microreactor and μTAS fields [J]. Microfluid. Nanofluid., 2005, 1: 108-118.
[3]	Wu C Y, Tsai R T. Fluid mixing via multidirectional vortices in converging-diverging meandering microchannels with semi-elliptical side walls [J]. Chem. Eng. J., 2013, 217: 320-328.
[4]	Sabotin I, Tristo G, Junkar M, Valentin?i? J. Two-step design protocol for patterned groove micromixers [J]. Chem. Eng. Res. Des., 2013, 91: 778-788.
[5]	Xia G D, Li J, Tian X P, Zhou M Z. Analysis of flow and mixing characteristics of planar asymmetric split-and-recombine (P-SAR) micromixers with fan-shaped cavities [J]. Ind. Eng. Chem. Res., 2012, 51: 7816-7827.
[6]	Li J, Xia G D, Li Y F. Numerical and experimental analyses of planar asymmetric split-and-recombine micromixer with dislocation sub-channels [J]. J. Chem. Technol. Biotechnol., 2013, 88: 1757-1765.
[7]	Ottino J M. The Kinematics of Mixing: Stretching, Chaos, and Transport [M]. New York: Cambridge University Press, 1989.
[8]	Shih T R, Chung C K. A high-efficiency planar micromixer with convection and diffusion mixing over a wide Reynolds number range [J]. Microfluid. Nanofluid., 2008, 5: 175-183.
[9]	Cheri M S, Latifi H, Moghaddam M S, Shahraki H. Simulation and experimental investigation of planar micromixers with short-mixing-length [J]. Chem. Eng. J., 2013, 234: 247-255.
[10]	Hossain S, Husain A, Kim K Y. Shape optimization of a micromixer with staggered-herringbone grooves patterned on opposite walls [J]. Chem. Eng. J., 2010, 162: 730-737.
[11]	Li Jian (李健), Xia Guodong (夏国栋). Fluid flow and mixing characteristics in micromixer with vortex-generated structures [J]. CIESC Journal (化工学报), 2013, 64: 2328-2335.
[12]	Wang L J, Wu W, Li X. Numerical and experimental investigation of mixing characteristics in the constructal tree-shaped microchannel [J]. Int. J. Heat Mass Transf., 2013, 67:1014-1023.
[13]	Afzal A, Kim K Y. Passive split and recombination micromixer with convergent-divergent walls [J]. Chem. Eng. J., 2012, 203: 182-192.
[14]	Guo Z Y, Li D Y, Wang B X. A novel concept for convective heat transfer enhancement [J]. Int. J. Heat Mass Transf., 1998, 41: 2221-2225.
[15]	Chen Q, Wang M, Guo Z Y. Field synergy principle for energy conservation analysis and application [J]. Adv. Mech. Eng., 2010, 9: 129313.
[16]	Tian L T, He Y L, Lei Y G, Tao W Q. Numerical study of fluid flow and heat transfer in a flat-plate channel with longitudinal vortex generators by applying field synergy principle analysis [J]. Int. Commun. Heat Mass Transf., 2009, 36: 111-120.
[17]	Ren Y, Leung W W F. Numerical and experimental investigation on flow and mixing in batch-mode centrifugal microfluidics [J]. Int. J. Heat Mass Transf., 2013, 60: 95-104.
[18]	Hossain S, Ansari M A, Kim K Y. Evaluation of the mixing performance of three passive micromixers [J]. Chem. Eng. J., 2009, 150: 492-501.
[19]	Tsai R T, Wu C Y. An efficient micromixer based on multidirectional vortices due to baffles and channel curvature [J]. Biomicrofluidics, 2011, 5: 014103.
[20]	Liu W, Liu Z C, Ming T Z, Guo Z Y. Physical quantity synergy in laminar flow field and its application in heat transfer enhancement [J]. Int. J. Heat Mass Transf., 2009, 52: 4669-4672.

结构参数对布置窄缝和挡板的微混合器内流体流动和混合的影响

Effect of structural parameters on fluid flow and mixing characteristics in micromixer with gaps and baffles

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	苏伟, 马东旭, 金旭, 刘忠彦, 张小松. 表面润湿性对霜层传递特性影响可视化实验研究[J]. 化工学报, 2023, 74(S1): 122-131.
[2]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[3]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[4]	陈爱强, 代艳奇, 刘悦, 刘斌, 吴翰铭. 基板温度对HFE7100液滴蒸发过程的影响研究[J]. 化工学报, 2023, 74(S1): 191-197.
[5]	谈莹莹, 刘晓庆, 王林, 黄鲤生, 李修真, 王占伟. R1150/R600a自复叠制冷循环开机动态特性实验研究[J]. 化工学报, 2023, 74(S1): 213-222.
[6]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[7]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[8]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[9]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[10]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[11]	陈美思, 陈威达, 李鑫垚, 李尚予, 吴有庭, 张锋, 张志炳. 硅基离子液体微颗粒强化气体捕集与转化的研究进展[J]. 化工学报, 2023, 74(9): 3628-3639.
[12]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[13]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[14]	汪尔奇, 彭书舟, 杨震, 段远源. 含HFO混合体系气液相平衡的理论模型评价[J]. 化工学报, 2023, 74(8): 3216-3225.
[15]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.