立式分层并联径向流吸附器流场数值模拟

doi:10.11949/j.issn.0438-1157.20150192

化工学报 ›› 2015, Vol. 66 ›› Issue (11): 4485-4492.DOI: 10.11949/j.issn.0438-1157.20150192

立式分层并联径向流吸附器流场数值模拟

芮道哲, 张学军, 陈瑶, 邱利民, 张小斌

浙江大学制冷与低温研究所, 浙江省制冷与低温技术重点实验室, 浙江杭州 310027

收稿日期:2015-02-05 修回日期:2015-07-04 出版日期:2015-11-05 发布日期:2015-11-05
通讯作者: 张学军
基金资助:
国家重点基础研究发展计划项目子课题(2011CB706501);国家自然科学基金项目(51176164);浙江省自然科学基金项目(Y15E060014)。

Simulation of flow field in vertical radial flow adsorber with parallel connection device

RUI Daozhe, ZHANG Xuejun, CHEN Yao, QIU Limin, ZHANG Xiaobin

Institute of Refrigeration and Cryogenics, Zhejiang University, Key Laboratory of Refrigeration and Cryogenic Technology of Zhejiang Province, Hangzhou 310027, Zhejiang, China

Received:2015-02-05 Revised:2015-07-04 Online:2015-11-05 Published:2015-11-05
Supported by:
supported by Major State Basic Research Development Program of China (2011CB706501), National Natural Science Foundation of China (51176164) and Zhejiang Provincial Natural Science Foundation (Y15E060014).

摘要/Abstract

摘要：

为降低径向流吸附器高度对均布的影响,提出了径向流吸附器的分层并联设计方法,并建立了径向流分层并联吸附器的数值计算模型。应用计算流体力学方法对分层并联式径向流吸附器中流体在床层内的流场进行了数值模拟计算,并在相同条件下与增高改进后的径向流吸附器的流场分布进行对比。结果表明,分层并联设计方法的均匀度相比于增高方法的均匀度提高了80%,有效清除了径向流吸附器过高对床层内流体均布的负面影响,且对分层并联径向流吸附器上部单元床层厚度进一步优化,达到了上下单元同时穿透的目的。

关键词: 多孔介质, 吸附, 分层并联, 模型, 流体均布, 大流量

Abstract:

In order to reduce the non-uniformity of the flow distribution caused by excessively high bed, a new parallel connection device is presented. A mathematical model for a parallel connection vertical radial flow adsorber is established to simulate the flow field in the adsorption bed, and the characteristics of pressure drop and radial velocity profiles are obtained. This flow distribution is compared with that with height-increasing method with the same bed height. It is shown that the non-uniformity of radial static pressure drop and the energy passing through the bed are reduced significantly by using the parallel connection device. The revamped adsorber can maintain a high level of uniformity in the adsorption bed and avoid the influence of excessive height. The adsorption bed thickness of the upper unit is optimized to ensure the two units to be saturated simultaneously.

Key words: porous media, adsorption, parallel connection, model, flow distribution, large-scale

中图分类号:

TQ116

芮道哲, 张学军, 陈瑶, 邱利民, 张小斌. 立式分层并联径向流吸附器流场数值模拟[J]. 化工学报, 2015, 66(11): 4485-4492.

RUI Daozhe, ZHANG Xuejun, CHEN Yao, QIU Limin, ZHANG Xiaobin. Simulation of flow field in vertical radial flow adsorber with parallel connection device[J]. CIESC Journal, 2015, 66(11): 4485-4492.

参考文献 21

[1]	Zhang Xiaobin, Chen Jianye, Yao Lei, Huang Yonghua, Zhang Xuejun, Qiu Limin. Research and development of large-scale cryogenic air separation in China [J]. Journal of Zhejiang University-Science A (Applied Physics & Engineering), 2014, 15(5): 309-332.
[2]	Frank G K. Industrial Gas Handbook [M]. Florida: CRC Press, 2006: 534.
[3]	Li Huazhi (李化治). Technology of Oxygen Production (制氧技术) [M]. 2nd ed. Beijing: Metallurgical Industry Press, 2009: 400.
[4]	Wang Haoyu (王浩宇), Liu Yingshu (刘应书), Yang Xiong (杨雄). Progress in air pre-purification technology [J]. Chemical Industry and Engineering Progress (化工进展), 2014, 33(3): 542-549.
[5]	Lu Junliang (陆军亮), Zhang Xuejun (张学军), Qiu Limin (邱利民), Wang Xiaolei (王晓蕾). Theoretical analysis of uniform flow distribution in vertical radial adsorption bed [J]. CIESC Journal (化工学报), 2012, 63(S2): 21-25.
[6]	Chen Yao (陈瑶), Zhang Xuejun (张学军), Lu Junliang (陆军亮), Qiu Limin (邱利民), Zhang Xiaobin (张小斌), Sun Daming (孙大明), Gan Zhihua (甘智华). Flow characteristics of radial flow adsorber and its structure parameters optimization [J]. CIESC Journal (化工学报), 2014, 65(9): 395-3402.
[7]	Zhang Chengfang (张成芳), Zhu Zibin (朱子彬), Xu Maosheng (徐懋生), Zhu Bingchen (朱炳辰). An investigation of design on the uniform fluid distribution for radial flow reactors [J]. Journal of Chemical Industry and Engineering (China) (化工学报), 1979, 28(1): 67-90.
[8]	Chang H C, Saucier M, Calo J M. Design criterion for radial flow fixed-bed reactors [J]. AIChE Journal, 1983, 29(6): 1039-1041.
[9]	Li Ruijiang (李瑞江), Chen Chunyan (陈春燕), Wu Yongqiang (吴勇强), Zhu Zibin (朱子彬). Parameters for uniform distribution of stream in large-scale radial flow reactors [J]. Chemical Engineering (China) (化学工程), 2009, 37(10): 28-31.
[10]	Kareeri A A, Zughbi H D, Al-Ali H H. Simulation of flow distribution in radial flow reactors [J]. Ind. Eng. Chem. Res., 2006, 45: 2862- 2874.
[11]	Grenier M, Petit P. Cryogenic air separation: the last twenty years// Advances in Cryogenic Engineering [M]. US: Springer, 1986: 1063-1070.
[12]	Tentarelli S C. Radial flow adsorption vessel [P]: US, 5814129. 1998-9-29.
[13]	Celic C E, Smolarek J. Radial bed flow distributor for radial bed pressure adsorber vessel [P]: US, 0252378 Al. 2005-11-17.
[14]	Lu Mingzhang (卢明章), Wu Qiaoxian (吴巧仙). The test and prospect of the vertical radial flow adsorber [J]. Cryogenic Technology (深冷技术), 1992, (2): 15-21.
[15]	Zheng Xingang, Liu Yingshu, Liu Wenhai. Two-dimensional modeling of the transport phenomena in the adsorber during pressure swing adsorption process [J]. Industrial & Engineering Chemistry Research, 2010, 49(22): 11814-11824.
[16]	Zheng Xingang (郑新港), Liu Yingshu (刘应书), Li Yongling (李永玲), Zhang Hui (张辉), Liu Wenhai (刘文海). Velocity distribution in axial adsorber with consideration of mass variation [J]. Journal of University of Science and Technology Beijing (北京科技大学学报), 2011, 33(11): 1412-1418.
[17]	Sun Dexing (孙德兴). The applicable range, defect and correction of equivalent diameter used hydraulic diameter [J]. Journal of Engineering Thermophysics (工程热物理学报), 1987, 8(4): 357-362.
[18]	Lu Junliang (陆军亮). Investigation on the mechanism of fluid flow in the radial flow adsorber [D]. Hangzhou: Zhejiang University, 2014.
[19]	Wang Jinfu (王金福), Wang Zhanwen (汪展文), Jin Yong (金涌), Yu Zhiqing (俞芷青). Simulation of the gas distribution system for a radial flow moving-bed catalytic reforming reactor in change state flow [J]. Petrochemical Technology (石油化工), 1997, 26(9): 98-605.
[20]	Mu Zuze, Wang Jinfu, Wang Tiefeng, Jin Yong. Optimum design of radial flow moving-bed reactors based on a mathematical hydrodynamic model [J]. Chemical Engineering and Processing: Process Intensification, 2003, 42(5): 409-417.
[21]	Petrova T, Darakchiev R, Semkov K, Darakchiev S. Estimations of gas flow maldistribution in packed-bed columns [J]. Chem. Eng. Technol., 2008, 31(12): 1723-1729.

立式分层并联径向流吸附器流场数值模拟

Simulation of flow field in vertical radial flow adsorber with parallel connection device

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[2]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[3]	连梦雅, 谈莹莹, 王林, 陈枫, 曹艺飞. 地下水预热新风一体化热泵空调系统制热性能研究[J]. 化工学报, 2023, 74(S1): 311-319.
[4]	金正浩, 封立杰, 李舒宏. 氨水溶液交叉型再吸收式热泵的能量及分析[J]. 化工学报, 2023, 74(S1): 53-63.
[5]	王浩, 王振雷. 基于自适应谱方法的裂解炉烧焦模型化简策略[J]. 化工学报, 2023, 74(9): 3855-3864.
[6]	杨学金, 杨金涛, 宁平, 王访, 宋晓双, 贾丽娟, 冯嘉予. 剧毒气体PH₃的干法净化技术研究进展[J]. 化工学报, 2023, 74(9): 3742-3755.
[7]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[8]	李锦潼, 邱顺, 孙文寿. 煤浆法烟气脱硫中草酸和紫外线强化煤砷浸出过程[J]. 化工学报, 2023, 74(8): 3522-3532.
[9]	盛冰纯, 于建国, 林森. 铝基锂吸附剂分离高钠型地下卤水锂资源过程研究[J]. 化工学报, 2023, 74(8): 3375-3385.
[10]	张瑞航, 曹潘, 杨锋, 李昆, 肖朋, 邓春, 刘蓓, 孙长宇, 陈光进. ZIF-8纳米流体天然气乙烷回收工艺的产品纯度关键影响因素分析[J]. 化工学报, 2023, 74(8): 3386-3393.
[11]	于旭东, 李琪, 陈念粗, 杜理, 任思颖, 曾英. 三元体系KCl + CaCl₂ + H₂O 298.2、323.2及348.2 K相平衡研究及计算[J]. 化工学报, 2023, 74(8): 3256-3265.
[12]	高燕, 伍鹏, 尚超, 胡泽君, 陈晓东. 基于双流体喷嘴的磁性琼脂糖微球的制备及其蛋白吸附性能探究[J]. 化工学报, 2023, 74(8): 3457-3471.
[13]	诸程瑛, 王振雷. 基于改进深度强化学习的乙烯裂解炉操作优化[J]. 化工学报, 2023, 74(8): 3429-3437.
[14]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.
[15]	陈吉, 洪泽, 雷昭, 凌强, 赵志刚, 彭陈辉, 崔平. 基于分子动力学的焦炭溶损反应及其机理研究[J]. 化工学报, 2023, 74(7): 2935-2946.