甲烷化固定床反应器床层反应过程与场分布数值模拟

doi:10.11949/j.issn.0438-1157.20150826

化工学报 ›› 2015, Vol. 66 ›› Issue (9): 3391-3397.DOI: 10.11949/j.issn.0438-1157.20150826

甲烷化固定床反应器床层反应过程与场分布数值模拟

程源洪, 张亚新, 王吉德, 赵静

新疆大学化学化工学院, 煤炭清洁转化与化工过程自治区重点实验室, 新疆乌鲁木齐 830046

收稿日期:2015-06-04 修回日期:2015-06-14 出版日期:2015-09-05 发布日期:2015-09-05
通讯作者: 张亚新
基金资助:
国家自然科学基金项目(21366032)。

Numerical analysis of reaction process and flow field in fixed bed of methanation reactor

CHENG Yuanhong, ZHANG Yaxin, WANG Jide, ZHAO Jing

Key Laboratory of Coal Cleaning Conversion and Chemical Engineering Process, College of Chemistry and Chemical Engineering, Xinjiang University, Urumqi 830046, Xinjiang, China

Received:2015-06-04 Revised:2015-06-14 Online:2015-09-05 Published:2015-09-05
Supported by:
supported by the National Natural Science Foundation of China (21366032).

摘要/Abstract

摘要：

以甲烷化固定床反应器床层为研究对象,使用CFD软件编写CEL语言,将甲烷化反应以源项的形式添加到模拟过程中,对比多孔介质模型与填充球床模型模拟的准确性,选择填充球床模型进行模拟,获得了床层的速度场、组分浓度以及温度场分布。研究结果表明:与填充球床模型比较,由于多孔介质模型简化了内部的孔隙结构,使用其对固定床反应器进行模拟时存在较大误差,其中出口温度模拟值比实测值低13.6%;固定床的壁效应使近壁面处10%的圆环面积上通过20%的质量流量,进而显著影响床层内部场的分布;床层内部轴向温升显著,从250℃ 升高到 685℃,同时径向温度分布不均,变化范围在20～40℃内波动。

关键词: 甲烷化, 固定床, 填充球床, 场分布, 壁效应, CFD, 数值模拟

Abstract:

Fixed bed of methanation reactor was simulated by inserting methanation reaction into simulation process in the form of the source term by using the CFD software to write CEL language. Then, by comparing the simulation accuracy of porous model and packed pebble-bed model, and choosing the packed pebble-bed model to simulate, the velocity field, the concentration of the components and the temperature field distribution in bed layer were obtained. The results showed that using the porous model to simulate fixed bed reactor caused greater error with the reason that porous model ignore the internal pore structure. The effect of wall in fixed bed significantly influenced on the field distribution. For example, 20% of the mass flowed through the area near the wall that shared only 10% of the total area. The axial temperature rose from 250℃ to 685℃ significantly and the radial temperature distribution was not uniform with a fluctuating range of within 20℃ to 40℃.

Key words: methanation, fixed bed, packed pebble-bed, field distribution, wall effect, CFD, numerical simulation

中图分类号:

程源洪, 张亚新, 王吉德, 赵静. 甲烷化固定床反应器床层反应过程与场分布数值模拟[J]. 化工学报, 2015, 66(9): 3391-3397.

CHENG Yuanhong, ZHANG Yaxin, WANG Jide, ZHAO Jing. Numerical analysis of reaction process and flow field in fixed bed of methanation reactor[J]. CIESC Journal, 2015, 66(9): 3391-3397.

参考文献 20

[1]	Zhang Nan(张楠), Sun Zhongning(孙中宁), Yan Changqi(阎昌琪). Numerical analysis of flow field in three-dimensional randomly packed pebble-bed channel [J]. Atomic Energy Science and Technology(原子能科学技术), 2012, 46(Suppl.): 792-795.
[2]	Tan Lei(谭雷). Mathematical simulation on reactor for methanation of syngas[D].Shanghai: East China University of Science and Technology, 2012.
[3]	Guo Xueyan(郭雪岩). CFD modeling of heat transfer in fixed bed reactors [J]. Journal of Chemical Industry and Engineering (China) (化工学报), 2008, 59(8): 1914-1922.
[4]	Luo Xionglin(罗雄麟), Liu Jianxin(刘建新), Xu Feng(许锋), Zuo Xin(左信). Heterogeneous two-dimensional dynamic modeling and analysis of acetylene hydrogenation reactor [J]. Journal of Chemical Industry and Engineering (China) (化工学报), 2008, 59(6): 1454-1461.
[5]	Ding Shi, Wu Changning, Cheng Yinhong, Jin Yong, Cheng Yi. Analysis of catalytic partial oxidation of methane on rhodium-coated foam monolith using CFD with detailed chemistry [J]. Chemical Engineering Science, 2009, 65(6): 1989-1999.
[6]	Zhai Xuli, Ding Shi, Cheng Yinhong, Jin Yong, Cheng Yi. CFD simulation with detailed chemistry of steam reforming of methane for hydrogen production in an integrated micro-reactor [J]. International Journal of Hydrogen Energy, 2010, 35(11): 5383-5392.
[7]	Hulme I, Clavelle E, vander Lee L, et al. CFD modeling and validation of bubble properties for a bubbling fluidized bed [J]. Ind. Eng. Chem. Res., 2005, 44(12): 4254-4266..
[8]	Beerens M. Chemical Reaction Engineering (化学反应工程)[M]. Zhang Jiyan(张继炎), trans. Beijing: China Petrochemical Press, 1991: 83-120, 429-445.
[9]	Orhan M Tarhan. Catalytic Reactor Design (催化反应器设计)[M].Que Daoyou(阙道悠), trans. Beijing: Hydrocarbon Processing Press, 1989: 81-99.
[10]	Wang Qicheng (王其成), Pei Pei (裴培), Zhang Kai (张锴), et al. Numerical simulation of jetting characteristics in a gas-solid fluidized bed. Journal of Fuel Chemistry and Technology (燃料化学学报), 2007, 35 (3): 354-358.
[11]	Lei Yingjie(雷英杰). Genetic algorithm toolbox and its application by MATLAB(MATLAB 遗传算法工具箱及应用)[M]. Xi'an: Xi'an Electronic and Science University Press, 2005: 95-103.
[12]	Tian Liang(田亮), Jiang Da(蒋达), Qian Feng(钱锋). Simulation and optimization of acetylene converter with decreasing catalyst activity [J]. CIESC Journal (化工学报), 2012, 63(1): 185-192.
[13]	Chen Minheng(陈敏恒). Principles of Chemical Engineering(化工原理)[M]. Beijing: Chemical Industry Press, 1999: 161.
[14]	Zhang Kai(张锴), Brandani S.A model based on two-fluid theory for predicting hydrodynamics behavior in 3D fluidized beds(Ⅰ): Homogeneous or bubbling fluidization of gas-solid system[J].Journal of Chemical Industry and Engineering (China) (化工学报), 2008, 59(5): 1091-1099.
[15]	Hu Baolong(胡宝龙), Hu Guihua(胡贵华), Jiang Da(蒋达), Qian Feng(钱锋). Simulation and optimization of operating parameters of isothermal reaction process for acetylene hydrogenation [J]. CIESC Journal (化工学报), 2015, 66(1): 366-372.
[16]	Long Huilong(龙回龙), Xu Mingjie(许明杰), Yu Donghua(于东华), et al. Two-temperature model of water gas shift reaction in porous media based on FLUENT [J]. Computers and Applied Chemistry(计算机与应用化学), 2012, 29(8): 981-985.
[17]	Liu Wendong (刘文东), Zhang Kai (张锴), Bi Jicheng(毕继诚).CFD simulation on homogeneous or aggregative fluidization of FCC particles [J]. Journal of Petrochemical Universities (石油化工高等学校学报), 2007, 20 (2): 43-46.
[18]	Pamela Berkeley, Van P Carey.Thermodynamic analysis of wall effects on phase stability and homogeneous nucleation in nanochannels containing super heated liquid [J]. Nanoscale and Microscale Thermophysical Engineering, 2013, 17(4): 281-303.
[19]	Franz Román, Vitus Strahl-Schäfer, Oliver Hensel. Improvement of air distribution in a fixed-bed dryer using computational fluid dynamics [J]. Biosystems Engineering, 2012, 11(24): 359-369.
[20]	Mark F Mathias, Gregory P Muldowney. Effect of solids loading method on bed porosity and gas flux distribution in a fixed-bed reactor [J]. Chemical Engineering Science, 2000, 55(21): 4981-4991.

甲烷化固定床反应器床层反应过程与场分布数值模拟

Numerical analysis of reaction process and flow field in fixed bed of methanation reactor

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[4]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[5]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[6]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[7]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[8]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[9]	盛冰纯, 于建国, 林森. 铝基锂吸附剂分离高钠型地下卤水锂资源过程研究[J]. 化工学报, 2023, 74(8): 3375-3385.
[10]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[11]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[12]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[13]	李凯旋, 谭伟, 张曼玉, 徐志豪, 王旭裕, 纪红兵. 富含零价钴活性位点的钴氮碳/活性炭设计及甲醛催化氧化应用研究[J]. 化工学报, 2023, 74(8): 3342-3352.
[14]	黄可欣, 李彤, 李桉琦, 林梅. 加装旋转叶轮T型通道流场的模态分解[J]. 化工学报, 2023, 74(7): 2848-2857.
[15]	史方哲, 甘云华. 超薄热管启动特性和传热性能数值模拟[J]. 化工学报, 2023, 74(7): 2814-2823.