管束结构对开缝翅片椭圆管换热器性能的影响

doi:10.11949/j.issn.0438-1157.20170877

摘要/Abstract

摘要：

在模化试验验证的基础上，对不同横向管间距S₁、纵向管间距S₂和椭圆管长短轴比a/b的开缝翅片椭圆管换热器进行了数值模拟，分析了管束结构的差异对开缝翅片椭圆管换热器性能的影响。结果表明：横向管间距在60.55～70.55 mm范围内，空气侧Nu和Eu均随S₁减小而增大，S₁为60.55 mm时换热器综合流动传热性能最好；纵向管间距在65～75 mm范围内，空气侧Nu随S₂减小而增大，Eu变化不明显，S₂为65 mm时换热器综合流动传热性能最好；横向管间距对开缝翅片椭圆管换热器传热、流动性能的影响较纵向管间距更为明显；在等周长条件下，椭圆管长短轴比a/b在1.5～2.5范围内，a/b为1.8时换热器综合流动传热性能最好。研究成果可为此类换热器在工程实际中的应用与进一步优化提供依据。

关键词: 开缝翅片椭圆管换热器, 数值模拟, 模化试验, 传热, 优化

Abstract:

Numerical simulation on slit finned elliptical tube heat exchangers with different transverse tube pitch S₁, longitudinal tube pitch S₂ and the ratio a/b of major and minor axis of the elliptical tube, was verified by model experiment. The effect of tube bundle structure on the heat transfer and resistance characteristics of slit finned elliptical tube heat exchangers was analyzed. The results indicate that as S₁ decreases from 70.55 mm to 60.55 mm, Nu and Eu at air-side increase, with optimized comprehensive flow and heat transfer performance of the heat exchangers when S₁ equals to 60.55 mm. As S₂ decreases from 75 mm to 65 mm, Nu at air-side increases, but Eu at air-side has no significant changes, with optimized comprehensive flow and heat transfer performance of the heat exchangers when S₂ equals to 65 mm. The heat transfer and resistance characteristics of slit finned elliptical tube heat exchangers are significantly influenced by the transverse tube pitch. When the elliptical tube circumference is equal and a/b is between 1.5 and 2.5, the optimized comprehensive flow and heat transfer performance of the heat exchangers was the best when a/b was 1.8. The findings of this paper provide proofs of the application and further optimization of such heat exchangers in engineering practice.

Key words: slit finned elliptical tube heat exchangers, numerical simulation, modeling experiment, heat transfer, optimization

中图分类号:

TK223

杨涛, 袁益超. 管束结构对开缝翅片椭圆管换热器性能的影响[J]. 化工学报, 2018, 69(4): 1365-1373.

YANG Tao, YUAN Yichao. Effects of tube bundle structure on heat transfer and resistance characteristics of slit finned elliptical tube heat exchangers[J]. CIESC Journal, 2018, 69(4): 1365-1373.

参考文献 26

[1]	程菲, 苏保玲. 翅片管的传热分析及其表面几何参数的优化[J]. 建筑热能通风空调, 2003, (4):44-48. CHENG F, SU B L. Analysis of heat transfer and optimal dimensions of the finned tubes[J]. Building Energy & Environment, 2003, (4):44-48.
[2]	TANG L H, ZENG M, WANG Q W. Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns[J]. Experimental Thermal and Fluid Science, 2009, 33(5):818-827.
[3]	杨立军, 贾思宁, 卜永东, 等. 电站间冷系统空冷散热器翅片管束流动传热性能的数值研究[J]. 中国电机工程学报, 2012, 32(32):50-57. YANG L J, JIA S N, BU Y D, et al. Numerical study on flow and heat transfer characteristics of finned tube bundles for air-cooled heat exchangers of indirect dry cooling systems in power plants[J]. Proceedings of the CSEE, 2012, 32(32):50-57.
[4]	WANG C C, LEE W S, SHEU W J. A comparative study of compact enhanced fin-and-tube heat exchangers[J]. International Journal of Heat Mass Transfer, 2001, 44(18):3565-3573.
[5]	屠琦琅, 袁益超, 胡晓红. 翅片结构对双向开缝翅片管换热器性能的影响[J]. 化工学报, 2016, 67(11):4615-4622. TU Q L, YUAN Y C, HU X H. Effects of fin structure on heat transfer and resistance characteristics of super slit finned tube heat exchangers[J]. CIESC Journal, 2016, 67(11):4615-4622.
[6]	衣志超, 袁益超, 王学刚. 管间距对开缝翅片管换热器传热与阻力特性的影响[J]. 能源工程, 2015, (5):9-14. YI Z C, YUAN Y C, WANG X G. Influences of tube pitch on heat transfer and resistance characteristics of the slotted fin and tube heat exchanger[J]. Energy Engineering, 2015, (5):9-14.
[7]	罗林聪, 张冠敏, 田茂诚, 等. 异形管降膜传热与流动数值模拟研究[J]. 工程热物理学报, 2013, 34(4):710-714. LUO L C, ZHANG G M, TIAN M C, et al. Numerical simulation of liquid film flow on horizontal circular and shaped cylinders for falling film evaporation[J]. Journal of Engineering Thermophysics, 2013, 34(4):710-714.
[8]	丁际昭, 熊凡凡, 张荣伟, 等. 高效换热异型管的研究进展[J]. 广东化工, 2016, 43(14):121-122. DING J Z, XIONG F F, ZHANG R W, et al. Advances shaped tubes efficient heat transfer[J]. Guangdong Chemical Industry, 2016, 43(14):121-122.
[9]	屠珊, 杨冬, 黄锦涛, 等. 椭圆翅片管空冷器流动传热特性的研究[J]. 热能动力工程, 2000, 15(89):455-458. TU S, YANG D, HUANG J T, et al. A study of heat transfer characteristics of air-cooled heat exchangers consisting of elliptical-finned tubes[J]. Journal of Engineering for Thermal Energy and Power, 2000, 15(89):455-458.
[10]	SCHULENBERY F J. Finned elliptical tubes and their application in air cooled heat exchangers[J]. Trans of the SAME Ser. B Journal of Engineering for Industry, 1966, 88:179-190.
[11]	MESBAH G K, AMIR F, DAVID S K. An experimental characterization of cross-flow cooling of air via an in-line elliptical tube array[J]. International Journal of Heat and Fluid Flow, 2004, 25(4):636-648.
[12]	TAHSEEN A T, ISHAK M, RAHMAN M M. An overview on thermal and fluid flow characteristics in a plain plate finned and un-finned tube banks heat exchanger[J]. Renewable and Sustainable Energy Reviews, 2015, 43:363-380.
[13]	HAN H, HE Y L, LI Y S, et al. A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations[J]. International Journal of Heat and Mass Transfer, 2013, 65:686-695.
[14]	李启良. 风洞热交换器设计研究气动-声学风洞热交换器的数值模拟与试验研究[D]. 上海:同济大学, 2007. LI Q L. Numerical simulation and experimental study on heat exchanger of aero-acoustic wind tunnel[D]. Shanghai:Tongji University, 2007.
[15]	明廷臻, 党艳辉, 刘伟, 等. 椭圆管矩形翅片空冷器流体流动与传热特性数值分析[J]. 化工学报, 2009, 60(6):1380-1384. MING T Z, DANG Y H, LIU W, et al. Numerical analysis of fluid flow and heat transfer characteristics on elliptical tube with rectangular fins of air cooler[J]. CIESC Journal, 2009, 60(6):1380-1384.
[16]	赵兰萍, 杨志刚. 管间距对矩形翅片椭圆管换热管束性能的影响[J]. 同济大学学报(自然科学版), 2016, 44(1):150-154. ZHAO L P, YANG Z G. Effect of tube pitches on performance rectangular finned elliptical tube bundles[J]. Journal of Tongji University (Natural Science), 2016, 44(1):150-154.
[17]	赵兰萍, 杨志刚. 管束排列方式对矩形翅片椭圆管束性能的影响[J]. 同济大学学报(自然科学版), 2016, 44(2):298-302. ZHAO L P, YANG Z G. Effect of tube arrangement on performance of rectangular finned elliptical tube bundles[J]. Journal of Tongji University (Natural Science), 2016, 44(2):298-302.
[18]	赵兰萍, 宋亚军, 杨志刚. 矩形翅片椭圆换热管束性能[J]. 同济大学学报(自然科学版), 2016, 44(7):1096-1100. ZHAO L P, SONG Y J, YANG Z G. Performance of rectangular finned elliptical tube heat exchanger[J]. Journal of Tongji University (Natural Science), 2016, 44(7):1096-1100.
[19]	SOHAL M S, O'BRIEN J E. Improving air-cooled condenser performance using winglets and oval tubes in a geothermal power plant[J]. Geothermal Resources Council Transactions, 2001, 25(7):1-7.
[20]	杨金宝, 黄素逸. 横掠椭圆翅片管的放热[J]. 流体工程, 1987, (4):56-58. YANG J B, HUANG S Y. Heat transfer of air crossing across elliptic finned tube[J]. Fluid Engineering, 1987, (4):56-58.
[21]	闵敬春, 陶涛, 彭晓峰. 椭圆管直翅换热器翅片效率的计算[J]. 工程热物理学报, 2001, 22(4):473-476. MIN J C, TAO T, PENG X F. Calculation of fin efficiency of an oval finned tube heat exchanger[J]. Journal of Engineering Thermophysics, 2001, 22(4):473-476.
[22]	于新娜, 袁益超, 马有福, 等. H形翅片管束传热和阻力特性的试验与数值模拟[J]. 动力工程学报, 2010, 30(6):433-438. YU X N, YUAN Y C, MA Y F, et al. Experimental tests and numerical simulation on heat transfer and resistance characteristics of H-type finned tube banks[J]. Power Engineering, 2010, 30(6):433-438.
[23]	杨世铭, 陶文铨. 传热学[M]. 4版. 北京:高等教育出版社, 2006:205-206. YANG S M, TAO W Q. Heat Transfer[M]. 4th ed. Beijing:Higher Education Press, 2006:205-206.
[24]	陶文铨. 数值传热学[M]. 2版. 西安:西安交通大学出版社, 2001:207-218. TAO W Q. Numerical Heat Transfer[M]. 2nd ed. Xi'an:Xi'an Jiaotong University Press, 2001:207-218.
[25]	费业泰. 误差理论与数据处理[M]. 6版. 北京:机械工业出版社, 2010:57-60. FEI Y T. Error Theory and Data Processing[M]. 6th ed. Beijing:China Machine Press, 2010:57-60.
[26]	张薇, 杜小泽, 杨立军. 空冷散热器开缝翅片管束外空气流动传热特性研究[J]. 山东农业大学学报(自然科学版), 2016, 47(3):452-455. ZHANG W, DU X Z, YANG L J. Study on characteristics of flow heat conduction outside the pipe bundle of air-cooled radiator with slotted fins[J]. Journal of Shandong Agricultural University (Natural Science Edition), 2016, 47(3):452-455.ONKMAN J M. Dynamics modeling and loads analysis of an offshore floating wind turbine[R]. NREL/TP-500-41958, USA, 2007.