气固搅拌流化床内压力脉动特性的数值模拟

doi:10.3969/j.issn.0438-1157.2013.02.013

化工学报 ›› 2013, Vol. 64 ›› Issue (2): 498-503.DOI: 10.3969/j.issn.0438-1157.2013.02.013

气固搅拌流化床内压力脉动特性的数值模拟

顾雪萍, 韩颖, 王嘉骏, 冯连芳

浙江大学化学工程与生物工程学系,化学工程联合国家重点实验室,浙江杭州 310027

收稿日期:2012-07-26 修回日期:2012-09-28 出版日期:2013-02-05 发布日期:2013-02-05
通讯作者: 王嘉骏
作者简介:顾雪萍(1972—),女,讲师。
基金资助:
国家自然科学基金项目(21276222);国家高技术研究发展计划项目(2012AA040305);中央高校基本科研业务费专项资金资助项目。

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

GU Xueping, HAN Ying, WANG Jiajun, FENG Lianfang

State Key Laboratory of Chemical Engineering, Department of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China

Received:2012-07-26 Revised:2012-09-28 Online:2013-02-05 Published:2013-02-05
Supported by:
supported by the National Natural Science Foundation of China(21276222), the High-tech Research and Development Program of China(2012AA040305) and the Fundamental Research Funds for the Central Universities.

摘要/Abstract

摘要： 在传统气固流化床中引入搅拌桨,可减轻聚合物颗粒的黏附并强化流态化过程。采用计算流体力学(CFD)方法对搅拌流化床内的压力脉动特性进行数值模拟,考察流态化过程中的气泡行为。模拟过程采用多重参考坐标系方法解决搅拌桨区域的运动问题,由欧拉双流体模型和颗粒动力学方法模拟气固两相流。床层压力脉动的统计分析和功率谱分析表明,随着搅拌桨转速的增加,流化床内的压力脉动标准偏差和功率谱幅值变小,床层内的平均气泡尺寸减小,床层可由鼓泡流态化向散式流态化转变。

关键词: 搅拌流化床, 计算流体力学, 压力脉动, FFT功率谱分析

Abstract: Agitators were introduced to gas-solids fluidized beds to improve fluidization performance and scrape sticky particles from internal bed wall.Numerical simulations based on the computational fluid dynamics (CFD) method were carried out to predict bubble behavior in the agitated fluidized bed.The Euler-Euler two-fluid model and the kinetic theory of granular flow were incorporated to describe the gas-solids flow, whist the multiple reference frame method was applied to deal with the rotation of agitator.The numerical models were validated by bed pressure drop and its fluctuation obtained in the experiment.The bubble behavior and fluidization performance were investigated in terms of pressure fluctuation.The results indicated that the amplitudes of pressure fluctuation and its power spectrum were reduced by increasing agitation speed of frame impeller, while dominating frequency had positive but inconspicuous correlation with agitation.The characteristics of pressure fluctuation showed that bubble size in the fluidized bed went down with a rise in agitation speed, which might lead to the transition from bubbling fluidization to particulate fluidization.

Key words: agitated fluidized bed, computational fluid dynamics, pressure fluctuation, FFT analysis

中图分类号:

TQ051.1

顾雪萍, 韩颖, 王嘉骏, 冯连芳. 气固搅拌流化床内压力脉动特性的数值模拟[J]. 化工学报, 2013, 64(2): 498-503.

GU Xueping, HAN Ying, WANG Jiajun, FENG Lianfang. Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed[J]. CIESC Journal, 2013, 64(2): 498-503.

参考文献 25

[1]	Reed T M, Fenske M R.Effects of agitation on gas fluidization of solids[J].Industrial and Engineering Chemistry, 1955, 47(2):275-282
[2]	Murthy J S N, Sekhar P C, Haritha K, Balaram P, Anjani S.Hydrodynamic characteristics of stirred gas-solid fluidized bed[J].Journal of the Institute of Engineering(India), Chemical Engineering Division, 2003, 83:39-44
[3]	Murthy J S N, Sekhar P C.Studies on hydrodynamics of mechanically stirred fluidized beds—a statistical approach[J].Indian Chemical Engineer, 2004, 46(2):84-89
[4]	Leva M.Pressure drop and power requirements in a stirred fluidized bed[J].AIChE Journal, 1960, 6(4):688-692
[5]	Reina J, Velo E, Puigjaner L.Fluidization of waste-wood particles with mechanical agitation of the bed[J].Industrial & Engineering Chemistry Research, 2001, 40(1):393-397
[6]	Kim J, Han G Y.Effect of agitation on fluidization characteristics of fine particles in a fluidized bed[J].Powder Technology, 2006, 166(3):113-122
[7]	Godard K, Richardson J F.The use of slow speed stirring to initiate particulate fluidisation[J].Chemical Engineering Science, 1969, 24(1):194-195
[8]	Wang Jiajun(王嘉骏), Zhang Wenfeng(张文峰), Feng Lianfang(冯连芳), Gu Xueping(顾雪萍).Wavelets analysis of pressure fluctuation in agitated fluidized bed[J].Journal of Chemical Industry and Engineering(China)(化工学报), 2006, 57(12):2854-2859
[9]	Feng Lianfang(冯连芳), Zhang Wenfeng(张文峰), Wang Jiajun(王嘉骏), Gu Xueping(顾雪萍), Wang Kai(王凯).Pressure fluctuation in gas-solid agitated fluidized bed[J].Journal of Zhejiang University :Engineering Science(浙江大学学报:工学版), 2007, 41(3):524-528
[10]	Li Fan(李凡), Feng Lianfang(冯连芳), Gu Xueping(顾雪萍), Wang Kai(王凯), Liu Bo(刘波).Pressure drop in the gas-solid stirred fluidized bed[J].Journal of Chemical Engineering of Chinese Universities(高校化学工程学报), 2002, 16(4):384-388
[11]	Shi D P, Luo Z H, Guo A Y.Numerical simulation of the gas-solid flow in fluidized-bed polymerization reactors[J].Industrial & Engineering Chemistry Research,2010,49(9):4070-4079
[12]	Wang J, Han Y, Gu X, Feng L, Hu G.Effect of agitation on the fluidization behavior of a gas-solid fluidized bed with a frame impeller[J].AIChE Journal, 2012,DOI:10. 1002/aic.13893
[13]	Bi H T T.A critical review of the complex pressure fluctuation phenomenon in gas-solids fluidized beds[J].Chemical Engineering Science, 2007, 62(13):3473-3493
[14]	Nelson B, Briens C, Bergougnou M.Pressure fluctuations at individual grid holes of a gas-solid fluidized bed[J].Powder Technology, 1993, 77(1):95-102
[15]	Zhang Yi(张毅), Wei Yaodong(魏耀冬), Shi Mingxian(时铭显).Characteristics of pressure fluctuation in standpipe at negative pressure gradient in circulating fluidized bed[J].Journal of Chemical Industry and Engineering(China)(化工学报), 2007, 58(6):1417-1420
[16]	Li Xiaoxiang(李晓祥), Shi Yanfu(石炎福), Huang Weixing(黄卫星), Yu Huarui(余华瑞), Zhu Jingxu(祝京旭).Nonlinear analysis of gas-solid flow behavior in fast fluidized bed riser[J].Journal of Chemical Industry and Engineering(China)(化工学报), 2004, 52(2):182-188
[17]	Huang Hai(黄海), Huang Yilun(黄轶伦), Zhang Weidong(张卫东).Modeling and analysis of pressure fluctuations in a gas-solids fluidized bed[J].Journal of Chemical Industry and Engineering(China)(化工学报), 1999, 50(6):812-817
[18]	Wang Yi(王轶), Wang Tingjie(王亭杰), Jin Yong(金涌).Characterization of flow regimes in vibrated fluidized bed using chaotic analysis[J].CIESC Journal(化工学报), 2010, 61(3):557-564
[19]	Wang Chunhua(王春华), Zhong Zhaoping(仲兆平), Li Rui(李睿), Er Jiaqiang(鄂加强).Recurrence plots analysis of pressure fluctuation in gas-solids fluidized bed[J].CIESC Journal(化工学报), 2010, 61(1):43-48
[20]	Wang Qicheng(王其成), Ren Jintian(任金天), Pei Pei(斐培), Zhang Kai(张锴), Brandani S.CFD simulation of jet penetration depth in gas-solid fluidized bed :comparisons with experiments[J].CIESC Journal(化工学报), 2009, 60(6):1402-1408
[21]	Ding J, Gidaspow D.A bubbling fluidization model using kinetic-theory of granular flow[J].AIChE Journal, 1990, 36(4):523-538
[22]	Puncochar M, Drahos J, Cermak J, Selucky K.Evaluation of minimum fluidizing velocity in gas-fluidized bed from pressure-fluctuations[J].Chemical Engineering Communications, 1985, 35(1/2/3/4/5/6):81-87
[23]	Davies C E, Carroll A, Flemmer R.Particle size monitoring in a fluidized bed using pressure fluctuations[J].Powder Technology, 2008, 180(3):307-311
[24]	Davies C E, Krouse D, Carroll A.A new approach to the identification of transitions in fluidized beds[J].Powder Technology, 2010, 199(1):107-110
[25]	Wang J W, van der Hoef M A, Kuipers J A M.CFD study of the minimum bubbling velocity of Geldart A particles in gas-fluidized beds[J].Chemical Engineering Science, 2010, 65(12):3772-3785

气固搅拌流化床内压力脉动特性的数值模拟

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 25

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[2]	肖明堃, 杨光, 黄永华, 吴静怡. 浸没孔液氧气泡动力学数值研究[J]. 化工学报, 2023, 74(S1): 87-95.
[3]	温凯杰, 郭力, 夏诏杰, 陈建华. 一种耦合CFD与深度学习的气固快速模拟方法[J]. 化工学报, 2023, 74(9): 3775-3785.
[4]	汪林正, 陆俞冰, 张睿智, 罗永浩. 基于分子动力学模拟的VOCs热氧化特性分析[J]. 化工学报, 2023, 74(8): 3242-3255.
[5]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[6]	岳林静, 廖艺涵, 薛源, 李雪洁, 李玉星, 刘翠伟. 凹坑缺陷对厚孔板喉部空化流动特性影响研究[J]. 化工学报, 2023, 74(8): 3292-3308.
[7]	何晓崐, 刘锐, 薛园, 左然. MOCVD生长AlN单晶薄膜的气相和表面化学反应综述[J]. 化工学报, 2023, 74(7): 2800-2813.
[8]	牛超, 沈胜强, 杨艳, 潘泊年, 李熠桥. 甲烷BOG喷射器流动过程计算与性能分析[J]. 化工学报, 2023, 74(7): 2858-2868.
[9]	刘道银, 陈柄岐, 张祖扬, 吴琰. 颗粒聚团结构对曳力特性影响的数值模拟[J]. 化工学报, 2023, 74(6): 2351-2362.
[10]	郑志航, 马郡男, 闫子涵, 卢春喜. 提升管射流影响区内压力脉动特性研究[J]. 化工学报, 2023, 74(6): 2335-2350.
[11]	李晨曦, 刘永峰, 张璐, 刘海峰, 宋金瓯, 何旭. O₂/CO₂氛围下正庚烷的燃烧机理研究[J]. 化工学报, 2023, 74(5): 2157-2169.
[12]	董鑫, 单永瑞, 刘易诺, 冯颖, 张建伟. 非牛顿流体气泡羽流涡特性数值模拟研究[J]. 化工学报, 2023, 74(5): 1950-1964.
[13]	李正涛, 袁志杰, 贺高红, 姜晓滨. 疏水界面上的NaCl液滴蒸发过程内环流调控机制研究[J]. 化工学报, 2023, 74(5): 1904-1913.
[14]	周艾然, 陆平, 夏建辉, 李冬勤, 郭杰, 杜明, 董立春. 氯化钛白氧化反应器结疤问题分析及数值模拟[J]. 化工学报, 2023, 74(4): 1499-1508.
[15]	李亚飞, 邓建强, 何阳. 跨临界CO₂快速膨胀过程中非平衡冷凝和闪蒸机理的数值研究[J]. 化工学报, 2022, 73(7): 2912-2923.