化工学报 ›› 2020, Vol. 71 ›› Issue (8): 3393-3402.DOI: 10.11949/0438-1157.20200400
收稿日期:
2020-04-16
修回日期:
2020-05-20
出版日期:
2020-08-05
发布日期:
2020-08-05
通讯作者:
郭飞
作者简介:
郭飞(1988—),男,博士,助理研究员,基金资助:
Fei GUO1(),Zhaoxiang ZHANG1,2,Wei SONG3,Xiaohong JIA1
Received:
2020-04-16
Revised:
2020-05-20
Online:
2020-08-05
Published:
2020-08-05
Contact:
Fei GUO
摘要:
硫化作为橡胶制品成型过程中的关键工序,决定着制品的使用性能与尺寸精度,通过模拟仿真技术有助于实现对硫化过程的精确控制以及减少能量消耗。基于此,从微观尺度和宏观尺度两个层面综述了橡胶硫化过程数值模拟的研究进展,重点分析了理论与经验硫化反应动力学模型的发展现状。最后,指出了橡胶硫化过程数值模拟的发展方向与趋势。
中图分类号:
郭飞,张兆想,宋炜,贾晓红. 橡胶硫化过程数值模拟研究进展[J]. 化工学报, 2020, 71(8): 3393-3402.
Fei GUO,Zhaoxiang ZHANG,Wei SONG,Xiaohong JIA. Research progress in numerical simulation of rubber vulcanization[J]. CIESC Journal, 2020, 71(8): 3393-3402.
模型名称 | 模型形式 | 参考文献 |
---|---|---|
Piloyan | [ | |
Kamal-Sourour | [ | |
Leroy | [ | |
Rafei | [ | |
Yeoh | [ | |
Jia | [ |
表1 几种典型唯象动力学模型
Table 1 Several typical phenomenological reaction kinetic models
模型名称 | 模型形式 | 参考文献 |
---|---|---|
Piloyan | [ | |
Kamal-Sourour | [ | |
Leroy | [ | |
Rafei | [ | |
Yeoh | [ | |
Jia | [ |
1 | Trautner S, Lackner J, Spendelhofer W, et al. Quantification of the vulcanizing system of rubber in industrial tire rubber production by laser-induced breakdown spectroscopy (LIBS)[J]. Anal. Chem., 2019, 91(8): 5200-5206. |
2 | Qu L, Huang G, Wu J, et al. Damping mechanism of chlorobutyl rubber and phenolic resin vulcanized blends[J]. J. Mater. Sci., 2007, 42(17): 7256-7262. |
3 | Xiang C, Guo F, Liu X, et al. Numerical algorithm for fluid–solid coupling in reciprocating rod seals[J]. Tribo. Int., 2020, 143:106078. |
4 | Passador F R, Rodolfo A, Pessan L A, et al. In situ dynamic vulcanization of poly(vinyl chloride)/acrylonitrile-butadiene rubber blends[J]. J. Macromo. Sci. B., 2009, 48(2): 282-298. |
5 | Nakao T, Kohjiya S. Computer simulation of network formation in natural rubber (NR)[M]//Kohjiya S. Chemistry, Manufacture and Applications of Natural Rubber. London: Woodhead Publishing, 2014: 216-246. |
6 | Huang Y, Wang Z, Gao L, et al. The deterioration of foamed silicone rubber in humid and hot environments[J]. J. Cell. Plast., 2019, 55(6): 633-654. |
7 | Wei Y, Wu H, Weng G, et al. Effect of interface on bulk polymer: control of glass transition temperature of rubber[J]. J. Polym. Res., 2018, 25(8):173. |
8 | Ghoreishy M H R. A state-of-the-art review on the mathematical modeling and computer simulation of rubber vulcanization process[J]. Iran. Polym. J. Eng. Edu., 2016, 25(1): 89-109. |
9 | Milani G, Milani F. Parabola-hyperbola P-H kinetic model for NR sulphur vulcanization[J]. Polym. Test., 2017, 58:104-115. |
10 | 戈明亮, 阚长华, 易玉华, 等. 橡胶硫化反应动力学研究概况[J]. 橡胶工业, 2004, 51(10):631-635. |
Ge M L, Kan C H, Yi Y H, et al. A survey of the kinetics of rubber vulcanization[J]. China Rubber Industry, 2004, 51(10):631-635. | |
11 | Nozu S, Tsuji H, Itadani M, et al. Study of cure process of thick solid rubber[J]. J. Mater. Process. Technol., 2008, 201(1/2/3): 720-724. |
12 | Coran A Y. Chemistry of the vulcanization and protection of elastomers: a review of the achievements[J]. J. Appl. Polym. Sci., 2003, 87(1): 24-30. |
13 | Coran A Y. Vulcanization(Part VI): A model and treatment for scorch delay kinetics[J]. Rubber. Chem. Technol., 1964, 37(3): 689-697. |
14 | Mitraa A, Leonov A I. On rheology, cure kinetics and chemorheology of gum rubbers[J]. Polym. Sci. Ser. A Chem. Phys., 2010, 52(11): 1114-1123. |
15 | Espósito L H, Marzocca A J. Effect of electron-beam irradiation on the thermal vulcanization of a natural rubber compound[J]. J. Appl. Polym. Sci., 2018, 136(13): 1-12. |
16 | Ding R, Leonov A I. A kinetic model for sulfur accelerated vulcanization of a natural rubber compound[J]. J. Appl. Polym. Sci., 1996, 61(3): 455-463. |
17 | Ding R, Leonov A I, Coran A Y. A study of the vulcanization kinetics of an accelerated-sulfur SBR compound[J]. Rubber Chem. Technol., 1996, 69(1): 81-91. |
18 | 杨昌金, 罗勇悦, 陈帮乾, 等. 环氧化天然橡胶硫化反应动力学参数的拟合 [J]. 广州化工, 2014, 42(9): 42-44. |
Yang C J, Luo Y Y, Chen B Q, et al. Fitting of cure reaction kinetics parameters based on epoxidized natural rubber[J]. Guangzhou Chemical Industry, 2014, 42(9): 42-44. | |
19 | Fan R L, Zhang Y, Huang C, et al. Simulation and verification for sulfur accelerated vulcanization of gum natural rubber compound[J]. Rubber Chem. Technol., 2002, 75(2): 287-297. |
20 | 龚蓬, 张祥福, 张隐西. NR硫化返原动力学研究[J]. 橡胶工业, 1997, 44(4): 195-200. |
Gong P, Zhang X F, Zhang Y X. Kinetic study on the reversion of NR vulcanization[J]. China Rubber Industry, 1997, 44(4):195-200. | |
21 | 黄琛, 范汝良, 张勇, 等. NR硫化返原过程的动力学研究[J]. 橡胶工业, 2000, 47(4): 195-200. |
Huang C, Fan R L, Zhang Y, et al. Kinetic study on the reversion process of NR vulcanization[J]. China Rubber Industry, 2000, 47(4): 195-200. | |
22 | Jeong J H, Moon C W, Leonov A I, et al. Cure kinetics for silane coupled silica filled SBR compounds[J]. Rubber Chem. Technol., 2002, 75(1): 93-109. |
23 | Han I S, Chung C B, Kang S J, et al. A kinetic model of reversion type cure for rubber compounds[J]. Polymer (Korea), 1998, 22(2): 223-230. |
24 | Han I S, Chung C B, Lee J W. Optimal curing of rubber compounds with reversiontype cure behavior[J]. Rubber Chem. Technol., 2000, 73(1): 101-113. |
25 | Sun X, Isayev A I. Cure kinetics study of unfilled and carbon black filled synthetic isoprene rubber[J]. Rubber Chem. Technol., 2009, 82(2):149-169. |
26 | Milani G, Milani F. Iterative robust numerical procedure for the determination of kinetic constants in Hans model for NR cured with sulphur[J]. J. Math. Chem., 2015, 53(6): 1363-1379. |
27 | Leroy E, Souid A, Deterre R. A continuous kinetic model of rubber vulcanization predicting induction and reversion[J]. Polym. Test., 2013, 32(3): 575-582. |
28 | Milani G, Hanel T, Donetti R, et al. Combined experimental and numerical kinetic characterization of NR vulcanized with sulphur, N-terbutyl, 2 benzothiazylsulphenamide and N,N-diphenyl guanidine[C]//Cueto E, Chinesta F. International Conference on Numerical Analysis and Applied Mathematics. New York, America: American Institute of Physics, 2016, 1738: 480014. |
29 | Milani G, Leroy E, Milani F, et al. Mechanistic modeling of reversion phenomenon in sulphur cured natural rubber vulcanization kinetics[J]. Polym. Test., 2013, 32(6): 1052-1063. |
30 | Milani G, Milani F. EPDM accelerated sulfur vulcanization: a kinetic model based on a genetic algorithm[J]. J. Math. Chem., 2011, 49(7): 1357-1383. |
31 | Milani G, Hanel T, Donetti R, et al. A closed form solution for the vulcanization prediction of NR cured with sulphur and different accelerators[J]. J. Math. Chem., 2015, 53(4): 975-997. |
32 | Ghosh P, Katare S, Patkar P, et al. Sulfur vulcanization of natural rubber for benzothiazole accelerated formulations: from reaction mechanisms to a rational kinetic model[J]. Rubber Chem. Technol., 2003, 76(3): 592-693. |
33 | Likozar B, Krajnc M. Kinetic and heat transfer modeling of rubber blends sulfur vulcanization with N-t-butylbenzothiazole-sulfenamide and N,N-di-t-butylbenzothiazole-sulfenamide[J]. J. Appl. Polym. Sci., 2007, 103(1):293-307. |
34 | Barghamadi M, Ghoreishy M H R, Karrabi M, et al. Investigation on the kinetics of cure reaction of acrylonitrile-butadiene rubber (NBR)/polyvinyl chloride (PVC)/graphene nanocomposite using various models[J]. J. Appl. Polym. Sci., 2020, 137(18): 48632. |
35 | Kamal M R, Sourour S. Kinetics and thermal characterization of thermoset cure[J]. Polym. Eng. Sci., 1973, 13(1): 59-64. |
36 | Isayev A I, Deng J S. Nonisothermal vulcanization of rubber compounds[J]. Rubber Chem. Technol., 1988, 61(2): 340-361. |
37 | Isayev A I, Sobhanie M, Deng J S. Two-dimensional simulation of injection molding of rubber compounds[J]. Rubber Chem. Technol., 1988, 61(5): 906-937. |
38 | Kissinger H E. Reaction kinetics in differential thermal analysis[J]. Anal. Chem., 1957, 29(11): 1702-1706. |
39 | Leroy E, Souid A, Sarda A, et al. A knowledge based approach for elastomer cure kinetic parameters estimation[J]. Polym. Test., 2013, 32(1): 9-14. |
40 | Rafei M, Ghoreishy M H R, Naderi G. Development of an advanced computer simulation technique for the modeling of rubber curing process[J]. Comp. Mater. Sci., 2009, 47(2): 539-547. |
41 | Yeoh O H. Mathematical modeling of vulcanization characteristics[J]. Rubber Chem. Technol., 2012, 85(3): 482-492. |
42 | 贾玉玺, 孙胜, 季忠, 等. 硅橡胶硫化反应场的数值模拟[J]. 化学学报, 2002, 60(8): 1368-1373. |
Jia Y X, Sun S, Ji Z, et al. Numerical simulation of vulcanization field of silicone rubber[J]. Acta Chimica Sinica, 2002,60(8): 1368-1373. | |
43 | Tw C, Gd S, Al I. Reduced time approach to curing kinetics(Part I): Dynamic rate and master curve from isothermal data[J]. Rubber Chem. Technol., 1994, 66(94): 849-864. |
44 | Šesták J, Berggren G. Study of the kinetics of the mechanism of solid-state reactions at increasing temperatures[J]. Thermochim. Acta, 1971, 3(1): 1-12. |
45 | 李咏金. 橡胶硫化曲线变化的数学模型拟合(Ⅰ): 有返原现象的硫化曲线[J]. 合成橡胶工业, 1995, 18(1): 29-31. |
Li Y J. A mathematical model of rubber vulcanization curve change (Ⅰ): Vulcanization curve for reversion characteristic[J]. China Synthetic Rubber Industry, 1995, 18(1): 29-31. | |
46 | 李咏金. 橡胶硫化曲线变化的数学模型拟合(Ⅱ): 转矩上升的硫化曲线[J]. 合成橡胶工业, 1995, 18(3): 168-170. |
Li Y J. A mathematical model of rubber vulcanization curve change(Ⅱ): Vulcanization curve for rotative moment always rising [J]. China Synthetic Rubber Industry, 1995, 18(3): 168-170. | |
47 | 李咏金. 橡胶硫化曲线变化的数学模型拟合(Ⅲ): 平坦型的硫化曲线[J]. 合成橡胶工业, 1997, 20(2): 108-111. |
Li Y J. A mathematical model of rubber vulcanization curve change (Ⅲ): Vulcanization curve for smooth type[J]. China Synthetic Rubber Industry, 1997, 20(2): 108-111. | |
48 | Russell R, Smith D A, Welding G N. Kinetics of thiazole-accelerated sulfur vulcanization of natural rubber[J]. Rubber Chem. Technol., 1963, 36(3):835-843. |
49 | Ambelang J C, Prentice G A. Digital method of calculating the flow of heat through a tire during vulcanization[J]. Rubber Chem. Technol., 1972, 45(5): 1195-1201. |
50 | Prentice G A, Williams M C. Numerical evaluation of the state of cure in a vulcanizing rubber article[J]. Rubber Chem. Technol., 1980, 53(5): 1023-1031. |
51 | Abdul M, Rochette B, Sadr A, et al. Effect of variation in the values of the thermal properties of rubber on the vulcanization of thin and thick sheets[J]. Thermochim. Acta, 1984, 80(2): 287-296. |
52 | Chataing G, Chater M, Vergnaud J M. Determination of heat flux and profiles of temperature and state of cure in isothermal calorimetry with reaction of high enthalpy[J]. Thermochim. Acta, 1985, 89: 107-118. |
53 | Khouider A, Bouzon J, Vergnaud J M. Modelization of the DSC technique by considering heat transfer and kinetics of reaction in the case of rubber cure[J]. Thermochim. Acta, 1986, 98: 285-299. |
54 | Khouider A, Vergnaud J M. Effect of temperature of motionless air on the cure of vulcanizates after removal from the mold[J]. J. Appl. Polym. Sci., 1986, 32(6): 5301-5313. |
55 | 贾玉玺, 孙胜, 刘莉莉, 等. 模具硅橡胶材料热硫化工艺的有限元模拟[J]. 化工学报, 2003, 54(9): 1300-1304. |
Jia Y X, Sun S, Liu L L, et al. Finite element simulation of hot vulcanization process of moldable silicone rubber material[J].Journal of Chemical Industry and Engineering (China), 2003, 54(9): 1300-1304. | |
56 | 王雪峰. 轮胎硫化过程的模拟和无探针微机控制[D]. 北京: 清华大学, 1989. |
Wang X F. Simulation of tire curing process and microprobe free microcomputer control[D]. Beijing: Tsinghua University, 1989. | |
57 | Marzocca A J. Finite element analysis of cure in a rubber cylinder[J]. Polymer, 1991, 32(8): 1456-1460. |
58 | 刘柏兵, 温泰斗, 卜继玲, 等. 仿真分析技术在橡胶弹簧硫化时间设计中的应用[J]. 橡胶工业, 2018, 65(9): 965-970. |
Liu B B, Wen T D, Pu J L, et al. Application of simulation analysis technology in the design of vulcanization time of rubber spring[J]. China Rubber Industry, 2018, 65(9): 965-970. | |
59 | 杨俊, 陈平, 付金伦, 等. 叠层橡胶隔震支座硫化工艺有限元仿真与试验研究[J]. 橡胶工业, 2018, 65(11): 1278-1283. |
Yang J, Chen P, Fu J L, et al. Finite element simulation and experimental study on vulcanization process of laminated rubber bearing[J]. China Rubber Industry, 2000, 65(11): 1278-1283. | |
60 | 张金云, 刘肖英, 王伯刚, 等. 轮胎硫化温度场数值模拟[J]. 橡塑技术与装备, 2019, 45(11): 30-36. |
Zhang J Y, Liu X Y, Wang B G, et al. Numerical simulation of tire vulcanization temperature field[J]. China Rubber/Plastics Technology and Equipment, 2019, 45(11): 30-36. | |
61 | Han I S, Chung C B, Kim J H, et al. Dynamic simulation of the tire curing process[J]. Tire Science and Technology, 1996, 24(1): 50-76. |
62 | Tong J, Yan X. Finite element analysis of tire curing process[J]. J. Reinf. Plast. Compos., 2003, 22(11): 983-1002. |
63 | Yan X. A numerical modeling of dynamic curing process of tire by finite element[J]. Polym. J., 2007, 39(10): 1001-1010. |
64 | El Labban A, Mousseau P, Bailleul J L. et al. Numerical natural rubber curing simulation, obtaining a controlled gradient of the state of cure in a thick-section part[C]//Cueto E, Chinesta F. 10th ESAFORM Conference on Material Forming. New York, America: American Institute of Physics, 2007, 907: 921-926. |
65 | Wu J, Su B, Liu Q, et al. Research on vulcanization process simulation of butyl rubber based on a new characterization model of curing degree[J]. Prog. Rubber Plast. Recycling Technol., 2014, 30(4): 237-248. |
66 | Ghoreishy M H R, Rafei M, Naderi G. Optimization of the vulcanization process of a thick rubber article using an advanced computer simulation technique[J]. Rubber Chem. Technol., 2012, 85(4): 576-589. |
67 | Zhang J, Tang W X, Zhao X L, et al. Simulation of rubber piston curing process based on hybrid kinetic model[J]. Mater. Sci. Tech-Lond., 2012, 20(2): 16-22. |
68 | Su B, Wu J, Cui Z, et al. Modeling of truck tire curing process by an experimental and numerical method[J]. Iran. Polym. J. Eng. Edu., 2015, 24(7): 583-593. |
69 | Vafayan M, Ghoreishy M H R, Abedini H, et al. Development of an optimized thermal cure cycle for a complex-shape composite part using a coupled finite element/genetic algorithm technique[J]. Iran. Polym. J. Eng. Edu., 2015, 24(6): 459-469. |
70 | Shi F, Dong X. Three-dimension numerical simulation for vulcanization process based on unstructured tetrahedron mesh[J]. J. Manuf. Process., 2016, 22: 1-6. |
71 | Gough J. Calculation of times and temperatures for press vulcanization of thick rubber pads[J]. Rubber Chem. Technol., 2017, 90(1): 89-107. |
72 | Xu X, Zhou Q, Song N, et al. Kinetic analysis of isothermal curing of unsaturated polyester resin catalyzed with tert-butyl peroxybenzoate and cobalt octoate by differential scanning calorimetry[J]. J. Therm. Anal. Calorim., 2017, 129(2): 843-850. |
73 | Lucio B, De La Fuente J L. Kinetic and chemorheological modelling of the polymerization of 2,4-toluenediisocyanate and ferrocene-functionalized hydroxyl-terminated polybutadiene[J]. Polymer, 2018, 140: 290-303. |
74 | Yeo H. Curing kinetics of liquid crystalline 4,4’-diglycidyloxybiphenyl epoxy cured with 4,4’-diaminodiphenylsulfone[J]. Polymer, 2018, 159: 6-11. |
75 | Rabiei S, Shojaei A. Vulcanization kinetics and reversion behavior of natural rubber/styrene-butadiene rubber blend filled with nanodiamond — the role of sulfur curing system[J]. Eur. Polym. J., 2016, 81: 98-113. |
76 | Jin K, Heath W H, Torkelson J M. Kinetics of multifunctional thiol-epoxy click reactions studied by differential scanning calorimetry: effects of catalysis and functionality[J]. Polymer, 2015, 81: 70-78. |
[1] | 宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294. |
[2] | 张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301. |
[3] | 程成, 段钟弟, 孙浩然, 胡海涛, 薛鸿祥. 表面微结构对析晶沉积特性影响的格子Boltzmann模拟[J]. 化工学报, 2023, 74(S1): 74-86. |
[4] | 叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140. |
[5] | 张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190. |
[6] | 王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234. |
[7] | 何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774. |
[8] | 韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278. |
[9] | 邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406. |
[10] | 汪林正, 陆俞冰, 张睿智, 罗永浩. 基于分子动力学模拟的VOCs热氧化特性分析[J]. 化工学报, 2023, 74(8): 3242-3255. |
[11] | 程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501. |
[12] | 刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341. |
[13] | 洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319. |
[14] | 刘杰, 吴立盛, 李锦锦, 罗正鸿, 周寅宁. 含乙烯基胺酯键聚醚类可逆交联聚合物的制备及性能研究[J]. 化工学报, 2023, 74(7): 3051-3057. |
[15] | 张蒙蒙, 颜冬, 沈永峰, 李文翠. 电解液类型对双离子电池阴阳离子储存行为的影响[J]. 化工学报, 2023, 74(7): 3116-3126. |
阅读次数 | ||||||||||||||||||||||||||||||||||||||||||||||||||
全文 1408
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
摘要 1191
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||