等离子弧移动焊接的热-力耦合穿孔过程

doi:10.11949/j.issn.0438-1157.20160614

化工学报 ›› 2016, Vol. 67 ›› Issue (S1): 69-75.DOI: 10.11949/j.issn.0438-1157.20160614

等离子弧移动焊接的热-力耦合穿孔过程

李岩¹, 冯妍卉^2,3, 张欣欣^2,3, 武传松⁴

1 中国石油大学(北京)重质油国家重点实验室, 北京 102249;
2 北京科技大学机械工程学院, 北京 100083;
3 北京科技大学冶金工业节能减排北京市重点实验室, 北京 100083;
4 山东大学材料液固结构演变与加工教育部重点实验室, 山东济南 250061

收稿日期:2016-05-09 修回日期:2016-05-19 出版日期:2016-08-31 发布日期:2016-08-31
通讯作者: 冯妍卉,yhfeng@me.ustb.edu.cn
基金资助:
中国石油大学（北京）科研启动基金项目（2462015YJRC013）；国家自然科学基金项目（50936003）。

Thermal and mechanical coupled keyholing process in moving plasma arc welding

LI Yan¹, FENG Yanhui^2,3, ZHANG Xinxin^2,3, WU Chuansong⁴

1 State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China;
2 School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China;
3 Beijing Key Laboratory of Energy Saving and Emission Reduction for Metallurgical Industry, University of Science and Technology Beijing, Beijing 100083, China;
4 Key Laboratory for Liquid-Solid Structure Evolution and Materials Processing, Ministry of Education, Shandong University, Jinan 250061, Shandong, China

Received:2016-05-09 Revised:2016-05-19 Online:2016-08-31 Published:2016-08-31
Supported by:
supported by the Science Foundation of China Petroleum, Beijing (2462015YJRC013) and the National Natural Science Foundation of China (50936003).

摘要/Abstract

摘要：

等离子弧焊接中，强电弧可以穿透工件，在焊接熔池内形成一个充满高温电弧的小孔，热量由小孔内的电弧直接传输给下部工件，有利于焊接大厚度的工件。针对移动焊接工况开发出一种耦合小孔演变的热源模型。上表面采用双椭圆面热源，有效地表征工件运动引起的热量不均匀分布；下部采用动态增长的椎体热源，热源作用区域随小孔生长而增大。应用流体体积函数法（VOF）追踪小孔界面，将小孔深度作为热源参数调控热源动态增长。数值模拟获得了移动焊接的小孔传热机理和相应的温度场，同时详细考察了小孔界面及熔池内流动的演变过程。通过实验对比焊接熔池的形状尺寸，验证了该模型的正确性。

关键词: 等离子弧移动焊接, 传热, 小孔, 气液两相流, 流体体积函数, 数值模拟

Abstract:

Due to the strong heating effect and arc force, plasma arc welding (PAW) can instantly melt metal material and then penetrate through the molten metal, forming a vapor-filled cavity called as "keyhole". The arc temperature is extremely high in keyhole, and thus a large percentage of heat is able to be transferred to the bottom metal through the keyhole. With respect to the moving PAW, a keyhole-tracking heat source was developed to reflect the nonuniform heat transfer due to welding movement. It consists of a double-elliptical heat flux on top surface and a lower developing conical heat source proportional to the keyhole growth. The volume of fluid (VOF) method was applied to track keyhole interface, and the heat source was auto-controlled according to keyhole depth. By numerical simulation, heat transfer during the keyholing process was revealed and corresponding temperature field was calculated to display the thermal-physical mechanism in moving PAW. Moreover, keyhole evolution and molten metal flow in weld pool were also investigated to exhibit how the keyhole promotes deep penetration welding. Finally, experiment was carried out on stainless steel plate of thickness 8 mm, and the measured weld geometry and size coincide with simulation results.

Key words: moving plasma arc welding, heat transfer, keyhole, gas-liquid flow, volume of fluid, numerical simulation

中图分类号:

TK121

李岩, 冯妍卉, 张欣欣, 武传松. 等离子弧移动焊接的热-力耦合穿孔过程[J]. 化工学报, 2016, 67(S1): 69-75.

LI Yan, FENG Yanhui, ZHANG Xinxin, WU Chuansong. Thermal and mechanical coupled keyholing process in moving plasma arc welding[J]. CIESC Journal, 2016, 67(S1): 69-75.

参考文献 21

[1]	LI T Q, WU C S, FENG Y H, et al. Modeling of the thermal fluid flow and keyhole shape in stationary plasma arc welding[J]. Int. J. Heat Fluid Fl.,2012, 34(4):117-125.
[2]	LANCASTER J F. The Physics of Welding[M]. Oxford:Pergamon Press, 1984:268-280.
[3]	FORTAIN J M. Plasma welding evolution & challenges[C]//ⅡW Doc. XⅡ-1948-08, 2008:1-11.
[4]	WU C S, WANG H G, ZHANG Y M. A new heat source model for keyhole plasma arc welding in FEM analysis of the temperature profile[J]. Weld. J.,2006, 85(12):284-291.
[5]	武传松,王怀刚,张明贤. 小孔等离子弧焊接热场瞬时演变过程的数值分析[J]. 金属学报,2006, 42(3):311-316. WU C S, WANG H G, ZHANG M X. Numerical analysis of transient development of temperature field in keyhole plasma arc welding[J]. Acta Metall. Sin., 2006, 42(3):311-316.
[6]	WU C S, HU Q X, GAO J Q. An adaptive heat source model for finite-element analysis of keyhole plasma arc welding[J]. Comput. Mater. Sci., 2009, 46(7):167-172.
[7]	李岩, 冯妍卉, 张欣欣, 等. 等离子弧焊接熔池演变过程的模拟和验证[J]. 工程热物理学报, 2012, 33(8):1395-1399. LI Y, FENG Y H, ZHANG X X, et al. Simulation and validation of melten weld pool evolution in plasma arc welding[J]. Journal of Engineering Thermophysics, 2012, 33(8):1395-1399.
[8]	FAN H G, KOVACEVIC R. Keyhole formation and collapse in plasma arc welding[J]. J. Phys. D:Appl. Phys., 1999, 32(11):2902-2909.
[9]	ZHANG T, WU C S, FENG Y H. Numerical analysis of heat transfer and fluid flow in keyhole plasma arc welding[J]. Numer. Heat Trans. A, 2011, 60(8):685-698.
[10]	张涛,武传松,陈茂爱. 穿孔等离子弧焊接熔池流动和传热过程的数值模拟[J]. 金属学报, 2012, 48(9):1025-1032. ZHANG T, WU C S, CHEN M A. Modelling fluid flow and heat transfer phenomena in keyholing stage of plasma arc welding[J]. Acta Metall. Sin., 2012, 48(9):1025-1032.
[11]	WU C S, ZHANG T, FENG Y H. Numerical analysis of the heat and fluid flow in a weld pool with a dynamic keyhole[J]. Int. J. Heat Fluid Fl., 2013, 40(4):186-197.
[12]	王小杰,武传松,陈茂爱. 等离子弧定点焊熔池穿孔过程的数值分析[J]. 金属学报, 2010,46(8):984-990. WANG X J, WU C S, CHEN M A. Numerical simulation of weld pool keyholing process in stationary plasma arc welding[J]. Acta Metall. Sin., 2010, 46(8):984-990.
[13]	SUN J H, WU C S, FENG Y H. Modeling the transient heat transfer for the controlled pulse key-holing process in plasma arc welding[J]. Int. J. Therm. Sci., 2011, 50(9):1664-1671.
[14]	霍玉双,武传松,陈茂爱. 等离子弧焊接小孔形状和穿孔过程的数值分析[J]. 金属学报, 2011, 47(6):706-712. HUO Y S, WU C S, CHEN M A. Numerical simulation of keyhole shape and transformation from partial to open states in plasma arc welding[J]. Acta Metall. Sin., 2011, 47(6):706-712.
[15]	李岩, 冯妍卉, 张欣欣, 等. 等离子弧焊接穿孔、相变传热与流动的耦合过程[J]. 工程热物理学报, 2014, 35(5):939-943. LI Y, FENG Y H, ZHANG X X, et al. Coupled phenomena of keyhole, heat transfer and molten flow in plasma arc welding[J]. Journal of Engineering Thermophysics, 2014, 35(5):939-943.
[16]	HUO Y S, WU C S. Modeling the keyhole shape and dimension in plasma arc welding[J]. China Welding, 2009, 18(6):17-20.
[17]	LI Y, FENG Y H, ZHANG X X, et al. An improved simulation of heat transfer and fluid flow in plasma arc welding with modified heat source model[J]. Int. J. Therm. Sci., 2013, 64(2):93-104.
[18]	HIRT C W, NICHOLS B D. Volume of fluid (VOF) method for the dynamics of free boundaries[J]. J. Comput. Phys., 1981, 39(1):201-225.
[19]	LI Y, FENG Y H, ZHANG X X, et al. Energy propagation in plasma arc welding with keyhole tracking[J]. Energy, 2014, 64(1):1044-1056.
[20]	LIU Z M, WU C S, CHEN M A. Experimental sensing of the keyhole exit deviation from the torch axis in plasma arc welding[J]. Int. J. Adv. Manuf. Technol., 2014, 71(3):1209-1219.
[21]	LI T Q, WU C S. Numerical simulation of plasma arc welding with keyhole-dependent heat source and arc pressure distribution[J]. Int. J. Adv. Manuf. Technol., 2015, 78(4):593-602.

等离子弧移动焊接的热-力耦合穿孔过程

Thermal and mechanical coupled keyholing process in moving plasma arc welding

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[2]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[3]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[4]	程成, 段钟弟, 孙浩然, 胡海涛, 薛鸿祥. 表面微结构对析晶沉积特性影响的格子Boltzmann模拟[J]. 化工学报, 2023, 74(S1): 74-86.
[5]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[6]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[7]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[8]	陈爱强, 代艳奇, 刘悦, 刘斌, 吴翰铭. 基板温度对HFE7100液滴蒸发过程的影响研究[J]. 化工学报, 2023, 74(S1): 191-197.
[9]	刘明栖, 吴延鹏. 导光管直径和长度对传热影响的模拟分析[J]. 化工学报, 2023, 74(S1): 206-212.
[10]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[11]	江河, 袁俊飞, 王林, 邢谷雨. 均流腔结构对微细通道内相变流动特性影响的实验研究[J]. 化工学报, 2023, 74(S1): 235-244.
[12]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[13]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[14]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[15]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.