基于可压缩气辅的聚合物挤出成型非等温黏弹数值分析

doi:10.11949/j.issn.0438-1157.20141674

化工学报 ›› 2015, Vol. 66 ›› Issue (4): 1615-1623.DOI: 10.11949/j.issn.0438-1157.20141674

• 材料化学工程与纳米技术 • 上一篇

基于可压缩气辅的聚合物挤出成型非等温黏弹数值分析

任重^1,2, 黄兴元¹, 柳和生¹, 邓小珍¹, 何建涛¹

1. 南昌大学机电工程学院, 江西南昌 330031;
2. 江西科技师范大学光电子与通信重点实验室, 江西南昌 330038

收稿日期:2014-12-08 修回日期:2014-12-08 出版日期:2015-04-05 发布日期:2015-04-05
通讯作者: 黄兴元
作者简介:任重(1981-),男,博士,讲师。
基金资助:
国家自然科学基金项目(51163011,51463015);高等学校博士学科点专项科研基金项目(20093601110001);江西省研究生创新专项基金项目(YC2014-B004)。

Non-isothermal viscoelastic numerical analysis of compressible gas-assisted polymer extrusion molding

REN Zhong^1,2, HUANG Xingyuan¹, LIU Hesheng¹, DENG Xiaozhen¹, HE Jiantao¹

1. School of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330031, Jiangxi, China;
2. Key Laboratory of Optic-electronic and Communication, Jiangxi Science and Technology Normal University, Nanchang 330038, Jiangxi, China

Received:2014-12-08 Revised:2014-12-08 Online:2015-04-05 Published:2015-04-05
Supported by:
supported by the National Natural Science Foundation of China (51163011,51463015), the Specific Research Fund for the Doctoral Program of Higher Education of China (20093601110001) and the Graduate Innovation Fund of Jiangxi Province (YC2014-B004).

摘要/Abstract

摘要：

基于气体具有可压缩性特点提出了可压缩气辅挤出概念,为探明气辅挤出中可压缩气体对聚合物熔体挤出成型的影响建立了熔体和压缩气体两相流模型,利用有限元计算方法对可压缩气辅的聚合物挤出成型进行了非等温黏弹数值模拟,并对比分析了传统无气辅和可压缩气辅挤出的物理场分布情况。研究表明,气辅挤出中的气体密度分布不是恒定值,而是随压力和温度空间分布变化,并且在引入气体层以及气体可压缩性后,可压缩气辅挤出与传统无气辅挤出方法相比在各物理场分布上存在较大的差异,当可压缩气体入口压力逐渐增大时熔体挤出收缩程度明显增大。该结果与实验一致,这些是传统无气辅挤出模拟无法体现出来的。

关键词: 聚合物加工, 气辅挤出, 两相流, 可压缩, 计算流体力学, 数值分析

Abstract:

Based on the characteristics of gas compressibility, the concept of compressible gas-assisted extrusion was proposed. To verify the effect of compressible gas on polymer extrusion molding, the two-phase flow model polymer melt phase and compressible gas phase was established by means of finite element method, the non-isothermal viscoelastic numerical simulation of the compressible gas-assisted CG extrusion molding and the traditional without gas-assisted TWG extrusion method were performed. The density distribution of gas-assisted extrusion was not a constant value, but was different with the space distribution of pressure and temperature. Compared with the results of two kinds of extrusion methods, when the interaction of gas on polymer melts and gas compressibility were considered, all physical field distributions of CG extrusion method were obviously different from the TWG method. Shrinkage degree was more prominent when inlet pressure of gas phase increased, which was consistent with the results of experiments. These results and factors could not be reflected in the TWG extrusion simulation method.

Key words: polymer processing, gas-assisted extrusion, two-phase flow, compressibility, computational fluid dynamics, numerical analysis

中图分类号:

TQ320.66

任重, 黄兴元, 柳和生, 邓小珍, 何建涛. 基于可压缩气辅的聚合物挤出成型非等温黏弹数值分析[J]. 化工学报, 2015, 66(4): 1615-1623.

REN Zhong, HUANG Xingyuan, LIU Hesheng, DENG Xiaozhen, HE Jiantao. Non-isothermal viscoelastic numerical analysis of compressible gas-assisted polymer extrusion molding[J]. CIESC Journal, 2015, 66(4): 1615-1623.

参考文献 21

[1]	Tanner R I. A theory of die-swell [J]. Journal of Polymer Science Part A-2:Polymer Physics, 1970, 8(12):2067-2078
[2]	Liang Jizhao. Effects of extrusion conditions on die-swell behavior of polypropylene/diatomite composite melts [J]. Polymer Testing, 2008, 27: 936-940
[3]	Xiao Jianhua(肖建华), Liu Hesheng(柳和生), Huang Xingyuan(黄兴元). Extrusion swell and melt fracture of polymer [J]. Polymer Materials Science and Engineering(高分子材料科学与工程), 2008, 24(9): 36-40
[4]	Zatloukal M, Chaloupkova K, Witte J D, et al. Analysis of the free surface instabilities in extrusion and coextrusion flows for metallocene based polyolefins//European PLACE Conference[C]. Athens, Greece: TAPPI Press, 2007
[5]	Liang R F, Mackley M R. The gas-assisted extrusion of molten polyethlene [J]. Journal of Rheology, 2001, 45(1): 211-226
[6]	Arda D R, Mackley M R. Sharkskin instabilities and the effect of slip from gas-assisted extrusion [J]. Rheol. Acta, 2005, 44(4): 352-359
[7]	Liu Hesheng(柳和生), Huang Xingyuan(黄兴元), Zhou Guofa(周国发), et al. Numerical simulation of two dimensional isothermal viscoelastic polymer flow in gas-assisted extrusion [J]. Journal of Basic Science and Engineering(应用基础与工程科学学报), 2006, 14(4): 514-522
[8]	Huang Xingyuan(黄兴元), Liu Hesheng(柳和生), Zhou Guofa(周国发). Experiment and simulation for extrusion swell in gas-assisted extrusion [J]. Plastics(塑料), 2005, 34(6): 55-59
[9]	Deng Xiaozhen(邓小珍), Liu Hesheng(柳和生), Huang Xingyuan(黄兴元), et al. Effect of the gas-assisted coextrusion on special-shaped multilayer polymer processing [J]. Polymer Materials Science and Engineering(高分子材料科学与工程), 2013, 29(5): 137-140
[10]	Xiao Jianhua(肖建华), Liu Hesheng(柳和生), Huang Xingyuan(黄兴元), et al. Influence of slip length of gas-assisted extrusion die on pressure drop and first normal stress [J]. Polymer Materials Science and Engineering(高分子材料科学与工程), 2009, 25(6): 167-170
[11]	Lü Jing(吕静), Chen Jinnan(陈晋南), Hu Dongdong(胡冬冬). Numerical study of effect of wall slip on bi-component co-extrusion [J]. Journal of Chemical Industry and Engineering(China)(化工学报), 2004, 55(3): 455-459
[12]	Liu Hesheng(柳和生), Lu Chen(卢臣), Huang Xingyuan(黄兴元), et al. Numerical simulation and experimental study on die swell of T-shaped plastic profile extrusion from a gas-assisted die [J].Journal of Plasticity Engineering(塑性工程学报), 2008, 15(1): 158-161
[13]	Huang Yibin(黄益宾), Liu Hesheng(柳和生), Huang Xingyuan(黄兴元), et al. Numerical simulation of the die swell in gas-assisted coextrusion [J]. Polymer Materials Science and Engineering(高分子材料科学与工程), 2010, 26(5): 171-174
[14]	Deng Xiaozhen(邓小珍), Liu Hesheng(柳和生), Huang Xingyuan(黄兴元). Three-dimensional nonisothermal numerical simulation of die swell in gas-assisted coextrusion process with viscoelastic fluids [J]. Polymer Materials Science and Engineering(高分子材料科学与工程), 2013, 29(3): 169-172
[15]	Liu Hesheng(柳和生), Deng Xiaozhen(邓小珍), Huang Xingyuan(黄兴元), et al. Effect of air pressure on interface profile in gas-assisted coextrusion process [J]. Polymer Materials Science and Engineering (高分子材料科学与工程), 2014, 30(3): 119-123
[16]	Huang Xingyuan(黄兴元), Liu Hesheng(柳和生), Zhou Guofa(周国发), et al. The influence factors on the set up and stability of gas layer in gas assisted polymer extrusion [J]. Journal of Plasticity Engineering (塑性工程学报), 2005, 12(5): 101-109
[17]	Huang Yibin(黄益宾). Theoretical and experimental study on polymer gas-assisted co-extrusion [D]. Nanchang:Nanchang University, 2011
[18]	Huang Xingyuan(黄兴元), Liu Hesheng(柳和生), Zhou Guofa(周国发), et al. The experimental study of air-assisted extrusion of polymer [J].China Plastics(中国塑料), 2005, 19(3): 17-19
[19]	Phan-Thien N, Tanner R I. A new constitutive equation derived from network theory [J]. Journal of Non-Newtonian Fluid Mechanics, 1977, 2(4): 353-365
[20]	Deng Xiaozhen(邓小珍). Experimental and theoretical study on gas-assisted co-extrusion of plastic profile with an irregular cross-section [D]. Nanchang:Nanchang University, 2014: 32-64
[21]	He Jiantao(何建涛). Numerical simulation and experimental study on plastic profile gas-assisted coextrusion[D]. Nanchang: Nanchang University, 2014: 33-34

基于可压缩气辅的聚合物挤出成型非等温黏弹数值分析

Non-isothermal viscoelastic numerical analysis of compressible gas-assisted polymer extrusion molding

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周绍华, 詹飞龙, 丁国良, 张浩, 邵艳坡, 刘艳涛, 郜哲明. 短管节流阀内流动噪声的实验研究及降噪措施[J]. 化工学报, 2023, 74(S1): 113-121.
[2]	江河, 袁俊飞, 王林, 邢谷雨. 均流腔结构对微细通道内相变流动特性影响的实验研究[J]. 化工学报, 2023, 74(S1): 235-244.
[3]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[4]	肖明堃, 杨光, 黄永华, 吴静怡. 浸没孔液氧气泡动力学数值研究[J]. 化工学报, 2023, 74(S1): 87-95.
[5]	温凯杰, 郭力, 夏诏杰, 陈建华. 一种耦合CFD与深度学习的气固快速模拟方法[J]. 化工学报, 2023, 74(9): 3775-3785.
[6]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[7]	袁佳琦, 刘政, 黄锐, 张乐福, 贺登辉. 泡状入流条件下旋流泵能量转换特性研究[J]. 化工学报, 2023, 74(9): 3807-3820.
[8]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[9]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[10]	高燕, 伍鹏, 尚超, 胡泽君, 陈晓东. 基于双流体喷嘴的磁性琼脂糖微球的制备及其蛋白吸附性能探究[J]. 化工学报, 2023, 74(8): 3457-3471.
[11]	汪林正, 陆俞冰, 张睿智, 罗永浩. 基于分子动力学模拟的VOCs热氧化特性分析[J]. 化工学报, 2023, 74(8): 3242-3255.
[12]	岳林静, 廖艺涵, 薛源, 李雪洁, 李玉星, 刘翠伟. 凹坑缺陷对厚孔板喉部空化流动特性影响研究[J]. 化工学报, 2023, 74(8): 3292-3308.
[13]	郭雨莹, 敬加强, 黄婉妮, 张平, 孙杰, 朱宇, 冯君炫, 陆洪江. 稠油管道水润滑减阻及压降预测模型修正[J]. 化工学报, 2023, 74(7): 2898-2907.
[14]	高金明, 郭玉娇, 鄂承林, 卢春喜. 一种封闭罩内顺流多旋臂气液分离器的分离特性研究[J]. 化工学报, 2023, 74(7): 2957-2966.
[15]	何宣志, 何永清, 闻桂叶, 焦凤. 磁液液滴颈部自相似破裂行为[J]. 化工学报, 2023, 74(7): 2889-2897.