新型独立B型液化天然气船围护系统及蒸发率计算

doi:10.11949/j.issn.0438-1157.20150694

化工学报 ›› 2015, Vol. 66 ›› Issue (S2): 101-107.DOI: 10.11949/j.issn.0438-1157.20150694

新型独立B型液化天然气船围护系统及蒸发率计算

李国隆¹, 巨永林¹, 傅允准²

1. 上海交通大学制冷与低温工程研究所, 上海 200240;
2. 上海工程技术大学机械工程学院, 上海 201620

收稿日期:2015-05-25 修回日期:2015-06-07 出版日期:2015-08-31 发布日期:2015-08-31
通讯作者: 巨永林
基金资助:
工业和信息化部高技术船舶科研项目。

Containment system of new independent type B LNG carrier and boil off rate calculation

LI Guolong¹, JU Yonglin¹, FU Yunzhun²

1. Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240, China;
2. School of Mechanical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China

Received:2015-05-25 Revised:2015-06-07 Online:2015-08-31 Published:2015-08-31
Supported by:
supported by the Ministry of Industry and Information Technology of the People's Republic of China.

摘要/Abstract

摘要：

以一艘17万立方米新型独立B型液化天然气(LNG)船为研究对象,将该型围护系统与传统薄膜型和MOSS独立球型围护系统进行详细对比,突出该型围护系统的特点;分析船体和舱室结构后,通过合理和必要的简化,提供了一种计算独立B型液货舱传热的方法,通过数值模拟计算不同工况条件下液货舱的蒸发率,研究了聚氨酯泡沫绝热材料的热导率变化对液货舱蒸发率的影响。得到以下结论:(1)新型独立B型围护系统与传统围护系统相比有突出优势,在将来有很好的应用前景;(2)绝热层厚度为450 mm时,为了满足日蒸发率不能超过0.1%的限定要求,所选用的绝热材料的热导率应当小于或等于0.03 W·m^-1·K^-1。

关键词: 液化天然气船, 独立B型围护系统, 数值模拟, 对流, 传热, 蒸发率

Abstract:

Based on the analyses of the containment system of a new independent type B liquefied natural gas(LNG)carrier with the total capacity of 17×10⁴ m³,by comparing with the containment systems of traditional membrane-type and MOSS independent spherical type LNG carriers,the features of the new independent type B containment system are expressly highlighted.Based on the analyses of the hull and containment system structures of this LNG carrier,by taking into account of some reasonable and necessary simplification,a numerical simulation method is provided to calculate the heat transfer and the boil off rate of the containment system under different working conditions.And the effect of the thermal conductivity of reinforced polyurethane foam(RPUF)insulation material on boil off rate is studied.The following conclusions are obtained: (1)Given many advantages of the new independent type B containment system compared to traditional ones,this type of containment system has a promising application prospect in future.(2)When the thickness of insulation layer is 450 mm,the thermal conductivity of insulation material should be no larger than 0.03 W·m^-1·K^-1,in order to meet the requirement that the boil off rate is less than 0.1% per day.

Key words: LNG carrier, independent type B containment system, numerical simulation, convection, heat transfer, boil off rate

中图分类号:

U674.13⁺3.3

李国隆, 巨永林, 傅允准. 新型独立B型液化天然气船围护系统及蒸发率计算[J]. 化工学报, 2015, 66(S2): 101-107.

LI Guolong, JU Yonglin, FU Yunzhun. Containment system of new independent type B LNG carrier and boil off rate calculation[J]. CIESC Journal, 2015, 66(S2): 101-107.

参考文献 21

[1]	Choe J,Kim K,Lee D,Bang C,Lee D.Glass composite vibration isolating structure for the LNG cargo containment system[J].Composite Structures,2014,107:469-475.
[2]	Yu Y,Choi I,Nam S,Lee D.Cryogenic characteristics of chopped glass fiber reinforced polyurethane foam[J].Composite Structures,2014,107:476-481.
[3]	Lee C,Lee J.Failure analysis of reinforced polyurethane foam-based LNG insulation structure using damage-coupled finite element analysis[J].Composite Structures,2014,107:231-245.
[4]	Yu Y,Kim B,Lee D.Cryogenic reliability of composite insulation panels for liquefied natural gas(LNG)ships[J].Composite Structures,2012,94:462-468.
[5]	Yu Y,Kim B,Lee D.Cryogenic reliability of the sandwich board for LNG ship[J].Composite Structures,2013,95:547-556.
[6]	Yoon S,Kim K,Lee D.Improvement for the adhesive peel strength of the secondary barrier with level difference for LNG containment system[J].Composite Structures,2013,95:528-538.
[7]	Bang C,Park C,Lee D.Optimum glass fiber volume frac-tion in the adhesive for the Al-SUS adhesively bonded joints at cryogenic temperatures[J].Composite Structures,2014,108:119-128.
[8]	Choi I,Yu Y,Lee D.Cryogenic sandwich-type insulation board composed of E-glass/epoxy composite and polymeric foams[J].Composite Structures,2013,102:61-71.
[9]	Choi S,Roh J,Kim M,Lee W.Analysis of two main LNG CCS(cargo containment system)insulation boxes for leakage safety using experimentally defined thermal properties[J].Applied Ocean Research,2012,37:72-89.
[10]	Chun M,Kim M,Kim W,Kim S,Lee J.Experimental investigation on the impact behavior of membrane-type LNG carrier insulation system[J].Journal of Loss Prevention in the Process Industries,2009,22:901-907.
[11]	Cho J R,Park S W,Kim H S,Rashed S.Hydroelastic analysis of insulation containment of LNG carrier by global-local approach[J].International Journal for Numerical Methods in Engineering,2008,76:749-774.
[12]	Roh S,Son G,Song G,Bae J.Numerical study of transient natural convection in pressurized LNG storage tank[J].Applied Thermal Engineering,2013,52:209-220.
[13]	Shi Guangzhi(时光志),Sheng Sujian(盛苏建).Heat transfer analysis and boil off rate calculation of independent type C cargo tank[J].Ship and Ocean Engineering(船海工程),2013,42(1):65-69.
[14]	Zhang Weixing(章伟星),Zhou Hao(周昊),Cai Zhuyi(蔡洙一),Chen Yingqiu(陈映秋),Liu Chuntu(柳春图).The temperature field analysis for the tank insulation system of 138000 m3 LNG carrier[J].Shipbuilding of China(中国造船),2008,49(1):77-82.
[15]	Li Boyang(李博洋).FE analysis on temperature field of cavity of membrane type LNG carrier based on ANSYS[J].Ship Engineering(船舶工程),2008,30(Z1):29-32.
[16]	Yu Xianghu(余祥虎).Research on the LNG carrier tank's thermal transfer and stress finite element analysis[D].Wuhan:Wuhan University of Technology,2009.
[17]	Ding Shifeng(丁仕风),Tang Wenyong(唐文勇),Zhang Shengkun(张圣坤).A research on temperature field and stress field of large-scale LNG ship[J].Ship Engineering(船舶工程),2008,30(5):16-19.
[18]	Chen Bozhen(陈伯真),Hu Yuren(胡毓仁).The tempera-ture distribution and thermal stress analysis of ship structures[J].Journal of Shanghai Jiao Tong University(上海交通大学学报),1995,29(3):33-41.
[19]	Ten Xiaoqing(滕晓青),Gu Yongning(顾永宁).Steady temperature distribution and thermal stress analysis for double hull structure[J].Shipbuilding of China(中国造船),2000,41(2):58-65.
[20]	Xia Huabo(夏华波),Sun Kecheng(孙恪成),Shi Guang-zhi(时光志),Lin Jianhui(林建辉),Peng Wenjun(彭文君),Wu Shuzhong(吴树忠).Analysis of liquid cargo tank heat transfer on 30000 m3 LNG ship[J].Ship Engineering(船舶工程),2014,36(2):34-36.
[21]	Faghri A,Zhang Yuwen,Howell J R.Advanced Heat and Mass Transfer[M].Columbia:Global Digital Press,2010:555-569.

新型独立B型液化天然气船围护系统及蒸发率计算

Containment system of new independent type B LNG carrier and boil off rate calculation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[2]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[3]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[4]	陈爱强, 代艳奇, 刘悦, 刘斌, 吴翰铭. 基板温度对HFE7100液滴蒸发过程的影响研究[J]. 化工学报, 2023, 74(S1): 191-197.
[5]	刘明栖, 吴延鹏. 导光管直径和长度对传热影响的模拟分析[J]. 化工学报, 2023, 74(S1): 206-212.
[6]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[7]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[8]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[9]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[10]	程成, 段钟弟, 孙浩然, 胡海涛, 薛鸿祥. 表面微结构对析晶沉积特性影响的格子Boltzmann模拟[J]. 化工学报, 2023, 74(S1): 74-86.
[11]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[12]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[13]	齐聪, 丁子, 余杰, 汤茂清, 梁林. 基于选择吸收纳米薄膜的太阳能温差发电特性研究[J]. 化工学报, 2023, 74(9): 3921-3930.
[14]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[15]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.