化工学报 ›› 2019, Vol. 70 ›› Issue (5): 1713-1722.DOI: 10.11949/j.issn.0438-1157.20181269

• 流体力学与传递现象 • 上一篇    下一篇

新型蜂巢式液冷动力电池模块传热特性研究

冯能莲1(),马瑞锦1,陈龙科2,董士康1,王小凤3,张星宇3   

  1. 1. 北京工业大学环境与能源工程学院,北京 100124
    2. 上海奔悦人工智能科技有限责任公司,上海 200233
    3. 新能科技香港有限公司,中国 香港
  • 收稿日期:2018-10-29 修回日期:2019-01-25 出版日期:2019-05-05 发布日期:2019-05-05
  • 通讯作者: 冯能莲
  • 作者简介:冯能莲(1962—),男,博士,教授,<email>fengnl@bjut.edu.cn</email>
  • 基金资助:
    国家自然科学基金项目(51075010);北京市教育委员会重点项目(KZ200910005007)

Heat transfer characteristics of honeycomb liquid-cooled power battery module

Nenglian FENG1(),Ruijin MA1,Longke CHEN2,Shikang DONG1,Xiaofeng WANG3,Xingyu ZHANG3   

  1. 1. College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124, China
    2. Shanghai Benyue Artificial Intelligence Technology Co., Ltd., Shanghai 200233, China
    3. Xinen Technology Hong Kong Co., Ltd., Hong Kong, China
  • Received:2018-10-29 Revised:2019-01-25 Online:2019-05-05 Published:2019-05-05
  • Contact: Nenglian FENG

摘要:

为了维持动力电池的性能、延长其使用寿命,应使电池模块工作过程中的温度和温差维持在适宜的范围之内。为此,提出一种新型蜂巢式液冷动力电池模块,该结构内部设有进/出口导流板且电池呈蜂巢式分布,冷却液体与电池呈360°间接接触,极大强化了换热效果。在单体电池热特性数值模拟与试验验证的基础上,通过计算流体力学平台建立新型蜂巢式液冷电池模块模型,研究了电池模块的热行为,分析了冷却液流量、冷却液温度对电池模块传热性能的影响。结果表明:(1)增加冷却液流量可显著降低电池模块最高温度,改善温度均匀性,当冷却液流量增加到1.5 L/min之后,电池模块最高温度及最大温差趋于稳定;(2)冷却液温度的降低可显著降低电池模块中最高温度,但在一定程度上恶化了模块中的温度均匀性;(3)冷却液流量和温度对电池模块的加热特性影响显著。因此,采用液冷方式是必要的。

关键词: 单体电池, 数值模拟, 蜂巢式液冷动力电池模块, 实验验证, 模型, 传热性能

Abstract:

To maintain the performance of the power battery and prolong its service life, the temperature and temperature difference during the operation of the battery module should be maintained within an appropriate range. Thus, a new type of honeycomb liquid-cooled power battery module is proposed. The structure has an inlet/outlet guide plate inside and the battery is honeycomb-like distribution. The cooling liquid contacts with the battery indirectly at 360°, which greatly strengthens the heat transfer effect. On the basis of the numerical simulation and experimental validation of the thermal characteristics of single battery, a new model of honeycomb liquid-cooled battery module was established by computational fluid dynamics(CFD) platform, the thermal behavior of the battery module was studied, and the effects of the coolant flow rate, the coolant temperature of battery on the heat dissipation performance of the battery module were studied. The results show that: (1) Increasing the flow rate of coolant can significantly reduce the maximum temperature of the battery module and improve the temperature uniformity, when the flow rate of coolant increases to 1.5 L/min, the maximum temperature and the maximum temperature difference of the battery module tend to be stable; (2) Decreasing the temperature of coolant can significantly reduce the highest temperature of the battery module, but to a certain extent, the temperature uniformity in the battery module is deteriorated; (3) The coolant flow rate and the coolant temperature have significant influence on the heating characteristics of the battery module. Therefore, liquid cooling is necessary.

Key words: single battery, numerical simulation, honeycomb liquid-cooled power battery module, experimental validation, model, heat transfer performance

中图分类号: