规整填料表面液膜流动特性的数值模拟

doi:10.3969/j.issn.0438-1157.2013.06.005

化工学报 ›› 2013, Vol. 64 ›› Issue (6): 1925-1933.DOI: 10.3969/j.issn.0438-1157.2013.06.005

规整填料表面液膜流动特性的数值模拟

李相鹏, 陈冰冰, 高增梁

浙江工业大学化工机械设计研究所,浙江杭州 310032

收稿日期:2012-08-23 修回日期:2012-10-07 出版日期:2013-06-05 发布日期:2013-06-05
通讯作者: 李相鹏(1977—),男,博士,副教授。
作者简介:李相鹏(1977—),男,博士,副教授。
基金资助:
浙江省自然科学基金项目(Y4110619,Y1101148)。

Numerical simulation on hydraulic characteristics of liquid film on structured packing surface

LI Xiangpeng, CHEN Bingbing, GAO Zengliang

Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, Zhejiang, China

Received:2012-08-23 Revised:2012-10-07 Online:2013-06-05 Published:2013-06-05
Supported by:
supported by the Natural Science Foundation of Zhejiang Province(Y4110619,Y1101148).

摘要/Abstract

摘要： 精馏过程气液两相流运动分布特征对分离效率具有重要影响。为研究规整填料表面液膜流体动力学特性建立了基于VOF方法的CFD分析模型,并基于文献试验结果进行了验证。对液膜随时间和空间的演化分布特征、速度场分布和液相流量影响进行了模拟分析。液膜在波纹顶部下沿聚集形成凸起状波峰,在波纹底部波峰消失,而到达下节波纹上沿时,波峰重新形成;瞬态液膜厚度随时间波动,且沿填料表面液膜平均厚度先减小后保持稳定;发现液相聚集及形成液滴坠落容易导致出现干板区。不同位置液膜速度分布存在明显差异,沿填料表面液膜平均速度先增后减或保持稳定;液膜绕过波纹顶部时会加速,在波纹底部和上沿处会减速。液相流量增大,液膜平均厚度和速度均有所增大。

关键词: 规整填料, 气液两相流, 数值模拟, 液膜

Abstract: The hydraulic characteristics of gas-liquid two-phase flow in distillation process are important factor for separation efficiency.With water and air as working medium, a CFD model based on Navier-Stokes equations, RGN k-ε turbulent model and two-phase model of volume of fluid is employed to analyze the hydraulic characteristics of liquid film flow on the structured packing surface at normal temperature and pressure.The model and simulation method are validated by experimental results in literature.The spatial and temporal evolution of liquid film, velocity fields and influences of liquid mass flow rate are simulated and analyzed.Liquid will accumulate below the peaks of corrugation, forming a drop.At valleys, the liquid drop spreads and the film thickness increases, and as it reaches the upper slope of the next corrugation, the drop appears again.The instantaneous liquid film thickness oscillates with time.Along the packing surface the volume-averaged film thickness decreases first, and then keeps stable.Liquid accumulation and dropping have an important effect on the form of dry batches.The velocity profile within the bulk of film varies significantly at different positions of corrugation, and along the packing surface, the average velocity of liquid film increases first, then decreases or keeps stable.The liquid film will accelerate at the convex of corrugation and decelerate at the concave.With the increment of liquid mass flow rate, the average film thickness and velocity increase.

Key words: structured packing, gas-liquid two-phase flow, numerical simulation, liquid film

中图分类号:

TQ028.4

李相鹏, 陈冰冰, 高增梁. 规整填料表面液膜流动特性的数值模拟[J]. 化工学报, 2013, 64(6): 1925-1933.

LI Xiangpeng, CHEN Bingbing, GAO Zengliang. Numerical simulation on hydraulic characteristics of liquid film on structured packing surface[J]. CIESC Journal, 2013, 64(6): 1925-1933.

参考文献 20

[1]	Zhao L Q.Liquid film flows over complex surfaces[D].Tulsa, Oklahoma, USA:The University of Tulsa, 1991
[2]	Shetty S, Cerro R L.Flow of a thin film over a periodic surface[J].Int.J.Multiphase Flow, 1993,19(6):1013-1027
[3]	Nicolaiewsky E M A, Tavares F W, Rajagopal K, Fair J R.Liquid film flow and area generation in structured packed columns[J].Powder Technol., 1999,104(1):84-94
[4]	Luo Shujuan, Li Huaizhi, Fei Weiyang, Wang Yundong.Liquid film characteristics on surface of structured packing[J].Chin.J.Chem.Eng., 2009,17(1):47-52
[5]	Gu Fang(谷芳).CFD simulations of the local-flow and mass-transfer in the structured packing[D].Tianjin:Tianjin University, 2004
[6]	Chen Jiangbo(陈江波).Numerical and experimental study of transport phenomena in a structured packed column at high pressure[D].Tianjin:Tianjin University, 2006
[7]	Grünig J, Skale T, Kraume M.Liquid flow on a vertical wire in a countercurrent gas flow[J].Chem.Eng.J., 2010,164(1):121-131
[8]	Raynal L, Royon-Lebeaud A.A multi-scale approach for CFD calculations of gas-liquid flow within large size column equipped with structured packing[J].Chem.Eng.Sci., 2007,62(24):7196-7204
[9]	Haroun Y, Legendre D, Raynal L.Direct numerical simulation of reactive absorption in gas-liquid flow on structured packing using interface capturing method[J].Chem.Eng.Sci., 2010,65(1):351-356
[10]	Haroun Y, Raynal L, Legendre D.Mass transfer and liquid hold-up determination in structured packing by CFD[J].Chem.Eng.Sci., 2012,75(12):342-348
[11]	Fernandes J, Simes P C, Mota J P B, Saatdjian E.Application of CFD in the study of supercritical fluid extraction with structured packing:dry pressure drop calculations[J].J.Supercrit.Fluids, 2008,47(1):17-24
[12]	Fernandes J, Lisboa P F, Simes P C, Mota J P B, Saatdjian E.Application of CFD in the study of supercritical fluid extraction with structured packing:wet pressure drop calculations[J].J.Supercrit.Fluids, 2009,50(1):61-68
[13]	Valluri P, Matar O K, Hewitt G F, Mendes M A.Thin film flow over structured packings at moderate Reynolds numbers[J].Chem.Eng.Sci., 2005,60(7):1965-1975
[14]	Trifonov YuYa.Counter-current gas-liquid flow between vertical corrugated plates[J].Chem.Eng.Sci., 2011,66(20):4851-4866
[15]	Luo S J, Fei W Y, Song X Y, Li H Z.Effect of channel opening angle on the performance of structured packings[J].Chem.Eng.J., 2008,144(2):227-234
[16]	Gao Guohua,Zhang Lühong,Li Xingang,Sui Hong.CFD simulation of film flow and gas/liquid countercurrent flow on structured packing[J].Trans.Tianjin Univ., 2011,17(3):194-198
[17]	Raynal L, Boyer C, Ballaguet Jean-Pierre.Liquid holdup and pressure drop determination in structured packing with CFD simulations[J].Can.J.Chem.Eng., 2004,82(5):871-879
[18]	Brackbill J U, Kothe D B, Zemach C A.A continuum method for modeling surface tension[J].J. Comput. Phys., 1992,100(2):335-354
[19]	Olujic Z, Behrens M, Colli L, Paglianti A.Predicting the efficiency of corrugated sheet structured packings with large specific surface area[J].Chem.Biochem.Eng.Q., 2004,18(2):89-96
[20]	Repke J U, Ausner I, Paschke S, Hoffmann A, Wozny G.On the track to understanding three phases in one tower[J].Chem.Eng.Res.Des., 2007,85(1):50-58

规整填料表面液膜流动特性的数值模拟

Numerical simulation on hydraulic characteristics of liquid film on structured packing surface

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[2]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[3]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[4]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[5]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[6]	江河, 袁俊飞, 王林, 邢谷雨. 均流腔结构对微细通道内相变流动特性影响的实验研究[J]. 化工学报, 2023, 74(S1): 235-244.
[7]	袁佳琦, 刘政, 黄锐, 张乐福, 贺登辉. 泡状入流条件下旋流泵能量转换特性研究[J]. 化工学报, 2023, 74(9): 3807-3820.
[8]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[9]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[10]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[11]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[12]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[13]	高燕, 伍鹏, 尚超, 胡泽君, 陈晓东. 基于双流体喷嘴的磁性琼脂糖微球的制备及其蛋白吸附性能探究[J]. 化工学报, 2023, 74(8): 3457-3471.
[14]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[15]	黄可欣, 李彤, 李桉琦, 林梅. 加装旋转叶轮T型通道流场的模态分解[J]. 化工学报, 2023, 74(7): 2848-2857.