汲液多孔蒸发制冷墙体的性能分析

doi:10.3969/j.issn.0438-1157.2014.z2.010

化工学报 ›› 2014, Vol. 65 ›› Issue (z2): 64-70.DOI: 10.3969/j.issn.0438-1157.2014.z2.010

汲液多孔蒸发制冷墙体的性能分析

陈威, 赵群力, 王记

上海海事大学商船学院, 上海 201306

收稿日期:2014-08-20 修回日期:2014-08-29 出版日期:2014-12-30 发布日期:2014-12-30
通讯作者: 陈威
基金资助:
国家自然科学基金项目(51276107);上海市教委创新科研课题(14ZZ142);交通部应用基础项目(2013319810150)。

Analysis on cooling performance of porous pipes with water soaking-up ability for combining wall

CHEN Wei, ZHAO Qunli, WANG Ji

College of Merchant Marine, Shanghai Maritime University, Shanghai 201306, China

Received:2014-08-20 Revised:2014-08-29 Online:2014-12-30 Published:2014-12-30
Supported by:
supported by the National Natural Science Foundation of China (51276107), the Innovation Program of Shanghai Municipal Education Commission (14ZZ142) and the Ministry of Transport Application Foundation Project (2013319810150).

摘要/Abstract

摘要：

将汲液多孔材料管组合为蒸发制冷墙体。在室外温、湿度影响下,含湿多孔介质表面及内部水分蒸发制冷作用与管内部温度及温度梯度、含湿量和湿含量梯度相关联。含湿多孔管的蒸发可使其表面温度降低5~8℃,通过多孔材料汲水补充蒸发所需水分。风速和环境相对湿度耦合作用于含湿多孔管的表面蒸发。环境相对湿度较低时段,与风速为1 m·s^-1相比,受2.5 m·s^-1风速影响的含湿多孔管表面温度可降低2℃。含湿多孔管气相分率增加,其表面蒸发面积减少。实验分析了多孔材料管的汲液特性以及组合墙体中含湿多孔管排列方式对墙体制冷特性影响。

关键词: 含湿多孔介质, 组合墙, 传热, 传质, 数值分析

Abstract:

The porous pipes with high water soaking-up ability have been combined for evaporative cooling wall. Due to the influences of the temperature and humidity outside, the evaporative cooling occurs on the porous pipe surface, which connects with the temperature and its gradient as well as the moisture content and its gradient in the porous pipe, and the temperature drop of 5—8℃ can be achieved in the experiment. The water sucked up by the porous pipes causes the continuation of the evaporative cooling. As the wind speed coupled with the relative humidity influences the evaporative cooling, the temperature drop of 2℃ on the pipe surface can be obtained at 2.5 m·s^-1 than that at 1 m·s^-1. The rise of gaseous phase in the porous pipe leads to the reduction of the evaporative area. The experiments have also been conducted to study the water soaking-up performance of the porous pipe and the influence of the porous pipe arrangement on the cooling of the combined wall.

Key words: wet porous media, combining wall, heat transfer, mass transfer, numerical analysis

中图分类号:

TK124

陈威, 赵群力, 王记. 汲液多孔蒸发制冷墙体的性能分析[J]. 化工学报, 2014, 65(z2): 64-70.

CHEN Wei, ZHAO Qunli, WANG Ji. Analysis on cooling performance of porous pipes with water soaking-up ability for combining wall[J]. CIESC Journal, 2014, 65(z2): 64-70.

参考文献 21

[1]	Chen Wei. Thermal analysis on the cooling performance of a wet porous evaporative plate for building[J]. Energy Conversion and Management, 2011, 52: 2217-2226
[2]	He Jiang, Hoyano Akira. Experimental study of practical applications of a passive evaporative cooling wall with high water soaking-up ability[J]. Building and Environment, 2011, 52: 98-108
[3]	Lemouari M, Boumaza M, Kaabi A. Experimental analysis of heat and mass transfer phenomena in a direct contact evaporative cooling tower[J]. Energy Conversion and Management, 2009, 50: 1610-1617
[4]	Gerson H, Santos dos, Mendes Nathan. Numerical analysis of passive cooling using a porous sandy roof[J]. Applied Thermal Engineering, 2013, 51: 25-31
[5]	Zhao X, Liu Shuli, Riffat S B. Comparative study of heat and mass exchanging materials for indirect evaporative cooling systems[J]. Building and Environment, 2008, 43: 1902-1911
[6]	He Jiang, Hoyano Akira. A 3D CAD-based simulation tool for prediction and evaluation of the thermal improvement effect of passive cooling walls in the developed urban locations[J]. Solar Energy, 2009, 83: 1064-1075
[7]	Pires L, Silva Pedro D, Castro Gomes J P. Performance of textile and building materials for a particular evaporative cooling purpose[J]. Experimental Thermal and Fluid Science, 2011, 35: 670-675
[8]	He Jiang, Hoyano Akira. Experimental study of cooling effects of a passive evaporative cooling wall constructed of porous ceramics with high water soaking-up ability[J]. Building and Environment, 2010, 45: 461-472
[9]	Wei Jin, He Jiang. Numerical simulation for analyzing the thermal improving effect of evaporative cooling urban surfaces on the urban built environment[J]. Applied Thermal Engineering, 2013, 51: 144-154
[10]	Xuan Y M, Xiao F, Niu X F, Huang X, Wang S W. Research and application of evaporative cooling in China: a review (I): Research[J]. Renewable and Sustainable Energy Reviews, 2012, 16: 3535-3546
[11]	Kim J H, You S M, Stephen U S, et al. Evaporative spray cooling of plain and microporous coated surfaces[J]. International Journal of Heat and Mass Transfer, 2004, 47: 3307-3315
[12]	Liu W, Shen S, Riffat S. Heat transfer and phase change of liquid in an inclined enclosure packed with unsaturated porous media[J]. International Journal of Heat and Mass Transfer, 2002, 45(26): 5209-5219
[13]	Liu W, Huang X, Riffat S. Heat and mass transfer with phase change in a rectangular enclosure packed with unsaturated porous material[J]. Heat and Mass Transfer, 2003, 39(3): 223-230
[14]	Chen Wei, Liu Wei, Liu Bingcheng. Numerical and experimental analysis of heat and moisture content transfer in a lean-to greenhouse[J]. Energy and Buildings, 2006, 38: 99-104
[15]	Ong K S. A mathematical model of a solar chimney [J]. Renewable Energy, 2003, 28: 1047-1060
[16]	Ong K S, Chow C C. Performance of a solar chimney[J]. Solar Energy, 2003, 74: 1-17
[17]	Chen Wei, Qu Man. Analysis of the heat transfer and airflow in solar chimney drying system with porous absorber[J]. Renewable Energy, 2014, 63: 511-518
[18]	Chen Wei, Liu Wei. Numerical analysis of heat transfer in a composite wall solar-collector system with a porous absorber[J]. Applied Energy, 2004, 78(2): 137-149
[19]	Zhang Suning (张素宁), Tian Shengyuan (田胜元). The institution of hourly solar radiation model [J]. Acta Energiae Solaris Sinica (太阳能学报), 1997(3): 273-277
[20]	Kang Shaozhong (康绍忠). Computer simulation of water transport in soil-plant-atmosphere continuum [J]. Acta Ecologica Sinica (生态学报),1991(3): 256-260
[21]	Tao Wenquan (陶文铨). Numerical Heat Transfer (数值传热学) [M]. 2nd ed. Xi'an: Xi'an Jiaotong University Press, 2001

汲液多孔蒸发制冷墙体的性能分析

Analysis on cooling performance of porous pipes with water soaking-up ability for combining wall

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	陈爱强, 代艳奇, 刘悦, 刘斌, 吴翰铭. 基板温度对HFE7100液滴蒸发过程的影响研究[J]. 化工学报, 2023, 74(S1): 191-197.
[4]	刘明栖, 吴延鹏. 导光管直径和长度对传热影响的模拟分析[J]. 化工学报, 2023, 74(S1): 206-212.
[5]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[6]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[7]	程成, 段钟弟, 孙浩然, 胡海涛, 薛鸿祥. 表面微结构对析晶沉积特性影响的格子Boltzmann模拟[J]. 化工学报, 2023, 74(S1): 74-86.
[8]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[9]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[10]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[11]	齐聪, 丁子, 余杰, 汤茂清, 梁林. 基于选择吸收纳米薄膜的太阳能温差发电特性研究[J]. 化工学报, 2023, 74(9): 3921-3930.
[12]	杨越, 张丹, 郑巨淦, 涂茂萍, 杨庆忠. NaCl水溶液喷射闪蒸-掺混蒸发的实验研究[J]. 化工学报, 2023, 74(8): 3279-3291.
[13]	陈天华, 刘兆轩, 韩群, 张程宾, 李文明. 喷雾冷却换热强化研究进展及影响因素[J]. 化工学报, 2023, 74(8): 3149-3170.
[14]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[15]	张贲, 王松柏, 魏子亚, 郝婷婷, 马学虎, 温荣福. 超亲水多孔金属结构驱动的毛细液膜冷凝及传热强化[J]. 化工学报, 2023, 74(7): 2824-2835.