基于优先级的烧结过程协调优化控制系统

doi:10.11949/j.issn.0438-1157.20151945

化工学报 ›› 2016, Vol. 67 ›› Issue (3): 885-890.DOI: 10.11949/j.issn.0438-1157.20151945

基于优先级的烧结过程协调优化控制系统

陈鑫¹, 黄冰², 吴敏¹, 何勇¹

1. 中国地质大学(武汉)自动化学院, 湖北武汉 430074;
2. 中南大学信息科学与工程学院, 湖南长沙 410083

收稿日期:2015-12-22 修回日期:2015-12-30 出版日期:2016-03-05 发布日期:2016-01-12
通讯作者: 陈鑫
基金资助:
国家自然科学基金重大国际合作研究项目(61210011);湖北省自然科学基金创新群体项目(2015CFA010)。

Coordinated optimal control based on priority for sintering process

CHEN Xin¹, HUANG Bing², WU Min¹, HE Yong¹

1. School of Automation, China University of Geosciences, Wuhan 430074, Hubei, China;
2. School of Information Science and Engineering, Central South University, Changsha 410083, Hunan, China

Received:2015-12-22 Revised:2015-12-30 Online:2016-03-05 Published:2016-01-12
Contact: 67
Supported by:
supported by the National Natural Science Foundation of China (61210011) and the Natural Science Foundation of Hubei Province (2015CFA010).

摘要/Abstract

摘要：

烧结过程是一个复杂的物理、化学反应过程,存在大滞后性、强非线性、多目标、多约束条件等控制难点。为了实现铁矿石烧结过程中混合料料槽料位和烧结终点这两个关键参数的综合控制,提出了一种基于优先级的协调优化控制方法。首先,通过综合运用神经网络预测和模糊控制,建立烧结终点的智能控制模型;同时,为了稳定混合料料槽料位,分析影响料槽料位的主要因素,基于专家知识建立了混合料料槽料位专家控制模型;然后,通过构造基于优先级的协调优化控制模型,在优先级控制的基础上采用软切换控制,将两个控制器相结合,获得最适宜的速比以及台车速度增量,实现烧结生产过程的协调优化控制。最后,针对该协调控制策略,设计了其工厂实现方案。

关键词: 烧结, 烧结终点, 优化, 神经网络, 优先级, 软切换

Abstract:

Sintering process is a complex physical and chemical reaction process which possesses the characteristics such as large delay, strong nonlinearity and uncertainty, multi-objective and multi-constrained. Burning through point is a key factor during sintering, which affects heat status of sintering process. Bunker-level is related to the sintering safety directly. To optimize these two key parameters of the iron ore sintering process, a coordinated optimal control method is presented based on priority. First, an intelligent control model of the burning through points is established by using neural network predictive and fuzzy control. In addition, based on the analysis on the factors affecting the stability of bunker level, a bunker-level control model is set up according to the experience of the local expert, which can maintain the bunker level and insure the safety of the sintering process. Then, the coordination control model based on priority which takes the soft switch control is designed to combine two different controllers, so that it results in coordinated optimal control of ratio and trolley speed. Finally, an experiment platform system of sinter is designed to realize this coordinated optimal control method.

Key words: sintering, burning through point, optimize, neural network, priority, soft switch

中图分类号:

TP273

陈鑫, 黄冰, 吴敏, 何勇. 基于优先级的烧结过程协调优化控制系统[J]. 化工学报, 2016, 67(3): 885-890.

CHEN Xin, HUANG Bing, WU Min, HE Yong. Coordinated optimal control based on priority for sintering process[J]. CIESC Journal, 2016, 67(3): 885-890.

参考文献 20

[1]	龙红明. 铁矿粉烧结原理与工艺[M]. 北京: 冶金工业出版社, 2010: 57. LONG H M. Mechanism and Technology for Sintering of Iron Ore Fines[M]. Beijing: Metallurgical Industry Press, 2010: 57.
[2]	ZHANG J. On-line control of burning through point based on numerical simulation[J]. Sintering and Pelletizing, 2011, 36 (3): 5-9.
[3]	WANG C S, WU M. Closed-loop identification method of sintering process with part of the inputs controlled[J]. Procedia Engineering, 2011, 15: 1910-1915.
[4]	KRAFT T, RIEDEL H. Numerical simulation of solid state sintering[J]. Journal of European Ceramic Society, 2004, 24 (2): 345-361.
[5]	郭立新,李浩,黄秋野,等. 烧结机模糊控制规则设计及其仿真[J]. 东北大学学报, 2006, 27(10): 1075-1078. GUO L X, LI H, HUANG Q Y, et al. Design and simulation for fuzzy control rules of trolley[J]. Journal of Northeastern University, 2006, 27 (10): 1075-1078.
[6]	WU M, LEI Q, CAO W H, et al. Integrated soft sensing of coke-oven temperature[J]. Control Engineering Practice, 2011, 19 (10): 1116-1125.
[7]	李家新,胡林,龙红明. 烧结终点控制优化策略的实现[J]. 安徽工业大学学报, 2010, 27 (4): 339-343. LI J X, HU L, LONG H M. Realization of BTP control system optimum strategy[J]. Journal of Anhui University of Technology, 2010, 27 (4): 339-343.
[8]	WU W, HUANG H, GU Y. The satisfaction solution of multi-objective optimization of reliability based on control principle of feedback[J]. Journal of Shanghai Jiaotong University, 2005, 39 (10): 1700-1705.
[9]	SAKAWA M, YAUCHI K. An interactive fuzzy satisficing method for multiobjective nonconvex programming problems with fuzzy numbers through coevolutionary genetic algorithms[J]. IEEE Transactions on Systems Man & Cybernetics, Part B: Cybernetics, 2001, 31 (3): 459-467.
[10]	BAREA R, MOCHON J, CORES A, et al. Fuzzy control of micum strength for iron ore sinter[J]. ISIJ International, 2006, 46 (5): 687-693.
[11]	崔凯. 面向综合生产目标的铅锌烧结过程优化方法研究[D]. 长沙: 中南大学, 2009. CUI K. Optimization method based on comprehensive product indices for lead-zinc sintering process[D]. Changsha: Central South University, 2009.
[12]	向婕, 吴敏, 曹卫华, 等. 基于模糊满意度的烧结过程多目标优化控制[J]. 化工学报, 2010, 61 (8): 2138-2143. XIANG J, WU M, CAO W H, et al. Multi-objective optimal control based on fuzzy satisfying for sintering process[J]. CIESC Journal, 2010, 61 (8): 2138-2143.
[13]	ZHANG X H, ZHANG J J, ZHANG J J, et al. Numerical simulation of heat and mass transfers in sintering process[J]. Journal of Central South University, 2013, 44 (2): 805-810.
[14]	刘斌, 冯妍卉, 姜泽毅, 等. 烧结床层的热质分析[J]. 化工学报, 2012, 63 (5): 1344-1353. DOI: 10.3969/j.issn.0438-1157.2012.05.003. LIU B, FENG Y H, JIANG Z Y, et al. Heat and mass transfer in sintering process[J]. CIESC Journal, 2012, 63 (5): 1344-1353. DOI: 10.3969/j.issn.0438-1157.2012.05. 003
[15]	WU M, CHEN X X, CAO W H, et al. An intelligent integrated optimization system for the pro-portioning of iron ore in a sintering process[J]. Journal of Process Control, 2014, 24: 182-202.
[16]	刘玉平, 翟廉飞, 柴天佑. 基于神经网络和多模型的非线性自适应PID控制及应用[J]. 化工学报, 2008, 59 (7): 1671-1676. LIU Y P, ZHAI L F, CHAI T Y. Nonlinear adaptive PID control using neural networks and multiple models and its application[J]. Journal of Chemical Industry and Engineering (China), 2008, 59 (7): 1671-1676.
[17]	张英俊, 马培军, 苏小红, 等. 属性权重不确定条件下的区间直觉模糊多属性决策[J]. 自动化学报, 2012, (2): 220-228. ZHANG Y J, MA P J, SU X H, et al. Multi-attribute decision making with uncertain attribute weight information in the framework of interval-valued intuitionistic fuzzy set[J]. Acta Automatica Sinica, 2012, (2): 220-228.
[18]	陈至坤, 唐瑞尹, 王福斌, 等. 基于RBF神经网络的烧结终点预报系统[J]. 机械工程与自动化, 2011, (1): 1-3. CHEN Z K, TANG R Y, WANG F B, et al. Adaptive prediction system of sintering burning through point based on RBF neural network model[J]. Mechanical Engineering Automation, 2011, (1): 1-3.
[19]	吴敏, 庄坤, 丁雷, 等. 铅锌烧结过程烧穿点的模糊预测控制方法[J]. 化工学报, 2008, 59 (7): 1698-1702. WU M, ZHUANG K, DING L, et al. Fuzzy predictive control of burning through point for lead-zinc sintering process[J]. Journal of Chemical Industry and Engineering (China), 2008, 59 (7): 1698-1702.
[20]	曹卫华, 段平, 吴敏, 等. 基于分级递阶结构的铁矿石烧结过程智能控制[J]. 仪器仪表学报, 2010, 31 (3): 553-557 CAO W H, DUAN P, WU M, et al. Intelligent control of iron ore sintering process based on a hierarchical configuration[J]. Chinese Journal of Scientific Instrument, 2010, 31 (3): 553-557.

基于优先级的烧结过程协调优化控制系统

Coordinated optimal control based on priority for sintering process

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨欣, 王文, 徐凯, 马凡华. 高压氢气加注过程中温度特征仿真分析[J]. 化工学报, 2023, 74(S1): 280-286.
[2]	温凯杰, 郭力, 夏诏杰, 陈建华. 一种耦合CFD与深度学习的气固快速模拟方法[J]. 化工学报, 2023, 74(9): 3775-3785.
[3]	陈哲文, 魏俊杰, 张玉明. 超临界水煤气化耦合SOFC发电系统集成及其能量转化机制[J]. 化工学报, 2023, 74(9): 3888-3902.
[4]	齐聪, 丁子, 余杰, 汤茂清, 梁林. 基于选择吸收纳米薄膜的太阳能温差发电特性研究[J]. 化工学报, 2023, 74(9): 3921-3930.
[5]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[6]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[7]	张曼铮, 肖猛, 闫沛伟, 苗政, 徐进良, 纪献兵. 危废焚烧处理耦合有机朗肯循环系统工质筛选与热力学优化[J]. 化工学报, 2023, 74(8): 3502-3512.
[8]	诸程瑛, 王振雷. 基于改进深度强化学习的乙烯裂解炉操作优化[J]. 化工学报, 2023, 74(8): 3429-3437.
[9]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.
[10]	曾如宾, 沈中杰, 梁钦锋, 许建良, 代正华, 刘海峰. 基于分子动力学模拟的Fe₂O₃纳米颗粒烧结机制研究[J]. 化工学报, 2023, 74(8): 3353-3365.
[11]	尹刚, 李伊惠, 何飞, 曹文琦, 王民, 颜非亚, 向禹, 卢剑, 罗斌, 卢润廷. 基于KPCA和SVM的铝电解槽漏槽事故预警方法[J]. 化工学报, 2023, 74(8): 3419-3428.
[12]	陈国泽, 卫东, 郭倩, 向志平. 负载跟踪状态下的铝空气电池堆最优功率点优化方法[J]. 化工学报, 2023, 74(8): 3533-3542.
[13]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[14]	吴文涛, 褚良永, 张玲洁, 谭伟民, 沈丽明, 暴宁钟. 腰果酚生物基自愈合微胶囊的高效制备工艺研究[J]. 化工学报, 2023, 74(7): 3103-3115.
[15]	汤晓玲, 王嘉瑞, 朱玄烨, 郑仁朝. 基于Pickering乳液的卤醇脱卤酶催化合成手性环氧氯丙烷[J]. 化工学报, 2023, 74(7): 2926-2934.