基于椭圆管束菱形受热面的流动与传热性能分析

doi:10.11949/j.issn.0438-1157.20161539

摘要/Abstract

摘要：

圆形管束菱形受热面在流动与传热方面表现出传热能力强、流动阻力大、吹灰方便等特点。以此为基础，提出了一种基于椭圆管束的菱形受热面。椭圆管束菱形受热面保持了圆形管束菱形受热面传热能力强和吹灰方便的特点，同时显著降低了烟气侧流动阻力。采用数值模拟方法，分析了叉排椭圆管束不同迎风角下的流动传热特性，与叉排圆形管束进行了对比，给出了各特征参数随Reynolds数的变化规律。模拟结果表明，迎风角为0°的叉排椭圆管束菱形受热面较圆形管束传热效果好，流动阻力小，综合性能高。

关键词: 椭圆管束, 流动, 传热, 数值分析

Abstract:

Rhombus heat transfer surface with staggered circular tubes bundles (CTB)performed high heat transfer capacity, large fluid flow resistance and high efficiency in ash blowing.Based on that, a new rhombus heat transfer surface with staggered elliptical tube bundles (ETB)was proposed.The new heat transfer surface maintained the high heat transfer coefficient and efficiency in ash blowing of CTB, which also showed lower resistance characteristic.2D numerical simulations of rhombus heat transfer surface with CTB and ETB were presented to conduct improving the performance in heat transfer and fluid flow.The effects of different upwind angels (-45°, 0°, 45°)of ETB were discussed.To obtain an understanding of the physical behavior of thermal and fluid flow, different Reynolds numbers ranging from 3000 to 21000 were calculated.Entropy generation principle was used to investigate the heat transfer performance.Results showed that compared with CTB and other ETB, ETB with 0° upwind angel had higher heat transfer coefficient and lower flow resistance, comprehensive properties of which was better.

Key words: elliptical tube bundles, fluid flow, heat transfer, numerical simulation

中图分类号:

TK124

袁宝强, 王沛丽, 杜文静. 基于椭圆管束菱形受热面的流动与传热性能分析[J]. 化工学报, 2016, 67(S2): 136-141.

YUAN Baoqiang, WANG Peili, DU Wenjing. Simulation on heat transfer and flow characteristics of rhombus heat transfer surface with elliptical tube bundles[J]. CIESC Journal, 2016, 67(S2): 136-141.

参考文献 17

[1]	赵佳丽,马克卫.中国能源效率和能源消费的倾向性研究[J]. 统计与信息论坛,2015,30(10):23-29. ZHAO J L,MA K W.Study on the tendency of energy efficiency and energy consumption in China[J]. Statistics & Information Forum,2015,30(10):23-29.
[2]	连红奎,李艳,束光阳子,等.我国工业余热回收利用技术综述[J]. 节能技术,2011,29(166):123-128. LIAN H Q,LI Y,SHUGUANG Y Z,et al.An overview of domestic technologies for waste heat utilization[J]. Energy Conservation Technology,2011,29(166):123-128.
[3]	孟欣,杨永平.中国工业余热利用技术概述[J]. 能源与节能,2016,(7):76-77. MENG X,YANG Y P.Overview of industrial waste heat utilization technology in China[J]. Energy and Energy Conservaion,2016,(7):76-77.
[4]	DESRAYAUD G,FICHERA A.Laminar natural convection in a vertical isothermal channel with symmetric surface-mounted rectangular ribs[J]. International Journal of Heat and Fluid Flow,2002,23(4):519-529.
[5]	陆艳华.水泥窑纯低温余热发电系统优化研究[D]. 广州:华南理工大学,2011. LU Y H.Study on optimization of cement kiln pure low temperature waste heat power generation system[D]. Guangzhou:South China University of Technology,2011.
[6]	刘彦.回转窑余热发电技术在水泥行业中的应用[J]. 煤炭与化工,2014,37(6):119-121. LIU Y.Rotary kiln waste heat power generation technology in the cement industry[J]. Coal and Chemical Industry,2014,37(6):119-121.
[7]	程庆芳,张邓杰,戴义平.水泥窑烟气双压余热锅炉热力系统的参数优化[J]. 热力发电,2010,39(7):18-22. CHENG Q F,ZHANG D J,DAI Y P.Parameter optimization in thermal power-generation system of dual-pressure heat recovery boiler[J]. Thermal Power Generation,2010,39(7):18-22.
[8]	何雁飞,朱大锋.余热锅炉技术的发展[J]. 东方电气评论,2011,25(98):68-73. HE Y F,ZHU D F.Development in HRSG Technology[J]. Dongfang Electric Review,2011,25(98):68-73.
[9]	杜文静,王沛丽,程林.一种新型受热面传热和流动特性的数值模拟及实验研究[J]. 化工学报,2015,66(6):2070-2075. DU W J,WANG P L,CHENG L.Numerical simulation and experimental research on novel heat transfer surface[J]. CIESC Journal,2015,66(6):2070-2075.
[10]	李金波,王沛丽,程林.一种新型受热面飞灰颗粒的沉积特性[J]. 化工学报,2016,67(9):3598-3606. LI J B,WANG P L,CHENG L. Characteristics of ash deposition on a novel heat transfer surface[J]. CIESC Journal,2016,67(9):3598-3606.
[11]	纪兴林.回转窑用集热器系统传热和流动特性的数值分析及实验研究[D]. 济南:山东大学,2016. JI X L.Experimental study and numerical analyses of flow and heat transfer characteristics of heat collector systems on rotary kiln[D]. Jinan:Shandong University,2016.
[12]	杜文静,赵春雷,程林.水泥生产过程中低温烟气用余热锅炉性能的全尺寸数值模拟[J]. 科学通报,2016,61(17):1992-1930. DU W J,ZHAO C L,CHENG L.Full-scale numerical simulations on the performance of the heat recovery boiler used in the cement production process[J]. Chinese Science Bulletin,2016,61(17):1992-1930.
[13]	史美中,王中铮.热交换器原理与设计[M]. 2版.南京:东南大学出版社,2009:277. SHI M Z,WANG Z Z.Principle and Design of Heat Exchangers[M].2nd ed.Nanjing:Southeast University Press,2009:277.
[14]	杜文静,王红福,曹兴,等.新型六分扇形螺旋导流板换热器壳程传热及流动特性[J]. 化工学报,2013,64(9):3124-3128. DU W J,WANG H F,CAO X,et al.Heat transfer and fluid flow on shell-side of heat exchanger with novel sextant sector helical baffles[J].CIESC Journal,2013,64(9):3124-3128.
[15]	LIU W,LIU Z,MA L.Application of a multi-field synergy principle in the performance evaluation of convective heat transfer enhancement in a tube[J]. Chinese Science Bulletin,2012,57(13):1600-1607.
[16]	孟凡康,高珊,闫明慧,等.二维方腔自然对流熵产模拟分析[J]. 太阳能学报,2010,31(10):1287-1290. MENG F K,GAO S,YAN M H,et al.Analysis of entropy generation in natural convection in 2D quadrate cavity[J]. Acta Energiae Solari Sinica,2010,31(10):1287-1290.
[17]	赵红霞,匙明申,管宁.流体横掠顺排和错排方形微针肋阵列的流动传热和熵产分析[J]. 山东科学,2015,28(1):16-18. ZHAO H X,SHI M S,GUAN N.Analysis of flow,heat transfer and entropy generation for flowacross inline and staggered square micro pins in a channel[J]. Shandong Science,2015,28(1):16-18.