1 |
Capecelatro J, Desjardins O, Fox R O. Numerical study of collisional particle dynamics in cluster induced turbulence[J]. Journal of Fluid Mechanics, 2014, 747: R2.
|
2 |
Agrawal K, Loezos P N, Syamlal M, et al. The role of meso-scale structures in rapid gas solid flows[J]. Journal of Fluid Mechanics, 2001, 445(1): 151-185.
|
3 |
Wang S, Luo K, Hu C S, et al. CFD-DEM simulation of heat transfer in fluidized beds: model verification, validation, and application[J]. Chemical Engineering Science, 2019, 197: 280-295.
|
4 |
Kim S W, Ahn J Y, Kim S D, et al. Heat transfer and bubble characteristics in a fluidized bed with immersed horizontal tube bundle[J]. International Journal of Heat and Mass Transfer, 2003, 46(3): 399-409.
|
5 |
Blaszczuk A, Pogorzelec M, Shimizu T. Heat transfer characteristics in a large-scale bubbling fluidized bed with immersed horizontal tube bundles[J]. Energy, 2018, 162: 10-19.
|
6 |
Qiu K Z, Wu F, Yang S L, et al. Heat transfer and erosion mechanisms of an immersed tube in a bubbling fluidized bed: a LES-DEM approach[J]. International Journal of Thermal Sciences, 2016, 100: 357-371.
|
7 |
Wu C C, Yang H T, He X H, et al. Principle, development, application design and prospect of fluidized bed heat exchange technology: comprehensive review[J]. Renewable and Sustainable Energy Reviews, 2022, 157: 112023.
|
8 |
Lichtenegger T, Peters E A J F, Kuipers J A M, et al. A recurrence CFD study of heat transfer in a fluidized bed[J]. Chemical Engineering Science, 2017, 172: 310-322.
|
9 |
Pan H, Chen X Z, Liang X F, et al. CFD simulations of gas-liquid-solid flow in fluidized bed reactors—a review[J]. Powder Technology, 2016, 299: 235-258.
|
10 |
Armstrong L M, Gu S, Luo K H. Study of wall-to-bed heat transfer in a bubbling fluidised bed using the kinetic theory of granular flow[J]. International Journal of Heat and Mass Transfer, 2010, 53(21/22): 4949-4959.
|
11 |
Patil D J, Smit J, van Sint Annaland M, et al. Wall-to-bed heat transfer in gas-solid bubbling fluidized beds[J]. AIChE Journal, 2006, 52(1): 58-74.
|
12 |
Abdelmotalib H M, Ko D G, Im I T. A study on wall-to-bed heat transfer in a conical fluidized bed combustor[J]. Applied Thermal Engineering, 2016, 99: 928-937.
|
13 |
Abdelmotalib H M, Im I T. Three dimensional modeling of heat transfer and bed flow in a conical fluidized bed reactor[J]. International Journal of Heat and Mass Transfer, 2017, 106: 1335-1344.
|
14 |
Alnaimat F, AlHamad I M, Mathew B. Heat transfer intensification in MEMS two-fluid parallel flow heat exchangers by embedding pin fins in microchannels[J]. International Journal of Thermofluids, 2021, 9: 100048.
|
15 |
Rauchenzauner S, Schneiderbauer S. Validation study of a spatially-averaged two-fluid model for heat transport in gas-particle flows[J]. International Journal of Heat and Mass Transfer, 2022, 198: 123382.
|
16 |
Nagrani P P, Municchi F, Marconnet A M, et al. Two-fluid modeling of heat transfer in flows of dense suspensions[J]. International Journal of Heat and Mass Transfer, 2022, 183: 122068.
|
17 |
Hou B L, Li H Z. Relationship between flow structure and transfer coefficients in fast fluidized beds[J]. Chemical Engineering Journal, 2010, 157(2/3): 509-519.
|
18 |
鲁波娜, 程从礼, 鲁维民, 等. 基于多尺度模型的MIP提升管反应历程数值模拟[J]. 化工学报, 2013, 64(6): 1983-1992.
|
|
Lu B N, Cheng C L, Lu W M, et al. Numerical simulation of reaction process in MIP riser based on multi-scale model[J]. CIESC Journal, 2013, 64(6): 1983-1992.
|
19 |
Wang J W. Continuum theory for dense gas-solid flow: a state-of-the-art review[J]. Chemical Engineering Science, 2020, 215: 115428.
|
20 |
Gao X, Wang L J, Wu C, et al. Novel bubble-emulsion hydrodynamic model for gas-solid bubbling fluidized beds[J]. Industrial & Engineering Chemistry Research, 2013, 52(31): 10835-10844.
|
21 |
Krishna R, van Baten J M. Using CFD for scaling up gas-solid bubbling fluidised bed reactors with Geldart A powders[J]. Chemical Engineering Journal, 2001, 82(1/2/3): 247-257.
|
22 |
Zhao B D, Wang J W. Statistical foundation of EMMS-based two-fluid models for heterogeneous gas-solid flow[J]. Chemical Engineering Science, 2021, 241: 116678.
|
23 |
Wang J W, Zhou Q, Hong K, et al. An EMMS-based multi-fluid model (EFM) for heterogeneous gas-solid riser flows(part Ⅱ): An alternative formulation from dominant mechanisms[J]. Chemical Engineering Science, 2012, 75: 349-358.
|
24 |
周泉. 提升管内气固两相流模拟: 基于EMMS理论的连续介质模型[D]. 北京: 中国科学院大学, 2015.
|
|
Zhou Q. Simulation of gas-solid two-phase flow in riser:continuum model based on EMMS theory[D]. Beijing: University of Chinese Academy of Sciences, 2015.
|
25 |
Zhao B D, Zhou Q, Wang J W, et al. CFD study of exit effect of high-density CFB risers with EMMS-based two-fluid model[J]. Chemical Engineering Science, 2015, 134: 477-488.
|
26 |
罗节文, 王雅彬, 李稳, 等. 气固鼓泡床结构双流体模型及其模拟验证[J]. 过程工程学报, 2024, 24(4): 435-444.
|
|
Luo J W, Wang Y B, Li W, et al. Model development and validation of a structural two-fluid model for gas-solid bubbling fluidized beds[J]. The Chinese Journal of Process Engineering, 2024, 24(4): 435-444.
|
27 |
Wang Y B, Liu Y G, Luo J W, et al. Validation of mesoscience-based structural model for simulating gas-solid flows in circulating-turbulent fluidized beds[J]. Powder Technology, 2024, 432: 119136.
|
28 |
Li W, Liu Y G, Luo J W, et al. Rapid simulation of industrial scale gas-solid BFB with bubble structure based two-fluid method[J]. Chemical Engineering Science, 2024, 288: 119770.
|
29 |
Wang J. A review of Eulerian simulation of Geldart A particles in gas-fluidized beds[J]. Industrial & Engineering Chemistry Research, 2009, 48(12): 67-77.
|
30 |
Gidaspow D. Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions[M]. Boston: Academic Press, 1994.
|
31 |
Karamanev D G, Nikolov L N. Free rising spheres do not obey Newton's law for free settling[J]. AIChE Journal, 1992, 38(11): 1843-1846.
|
32 |
Cai P, Schiavetti M, de Michele G, et al. Quantitative estimation of bubble size in PFBC[J]. Powder Technology, 1994, 80(2): 99-109.
|
33 |
Thomas D G. Transport characteristics of suspension(Ⅷ): A note on the viscosity of Newtonian suspensions of uniform spherical particles[J]. Journal of Colloid Science, 1965, 20(3): 267-277.
|
34 |
Abrahamsen A R, Geldart D. Behaviour of gas-fluidized beds of fine powders (part Ⅱ): Voidage of the dense phase in bubbling beds[J]. Powder Technology, 1980, 26(1): 47-55.
|
35 |
Kunii D, Levenspiel O. Bubbling bed model. Model for flow of gas through a fluidized bed[J]. Industrial & Engineering Chemistry Fundamentals, 1968, 7(3): 446-452
|
36 |
Chandran R, Chen J C. A heat transfer model for tubes immersed in gas fluidized beds[J]. AIChE Journal, 1985, 31(2): 244-252.
|
37 |
Yao X Y, Zhang Y M, Lu C X, et al. Systematic study on heat transfer and surface hydrodynamics of a vertical heat tube in a fluidized bed of FCC particles[J]. AIChE Journal, 2015, 61(1): 68-83.
|
38 |
魏庆, 姚秀颖, 张永民. 竖直管气固鼓泡流化床传热机理的CPFD模拟[J]. 化工学报, 2016, 67(5): 1732-1740.
|
|
Wei Q, Yao X Y, Zhang Y M. CPFD simulation on heat transfer mechanism of vertical tube in bubbling fluidized bed[J]. CIESC Journal, 2016, 67(5): 1732-1740.
|
39 |
Lan B, Zhao P, Xu J, et al. The critical role of scale resolution in CFD simulation of gas-solid flows: a heat transfer study using CFD-DEM-IBM method[J]. Chemical Engineering Science, 2023, 266: 118268.
|