硝酸盐重力热管启动特性初步实验研究

doi:10.3969/j.issn.0438-1157.2014.08.008

化工学报 ›› 2014, Vol. 65 ›› Issue (8): 2908-2913.DOI: 10.3969/j.issn.0438-1157.2014.08.008

硝酸盐重力热管启动特性初步实验研究

孟强¹, 吴玉庭¹, 熊亚选², 崔武军¹, 刘闪威¹, 马重芳¹, 李德英²

1 北京工业大学传热强化与过程节能教育部重点实验室及传热与能源利用北京市重点实验室, 北京 100124;
2 北京建筑大学供热、供燃气、通风及空调工程北京市重点实验室, 北京 100044

收稿日期:2013-10-16 修回日期:2014-01-03 出版日期:2014-08-05 发布日期:2014-08-05
通讯作者: 熊亚选
基金资助:
国家自然科学基金项目（51206004）；国家重点基础研究发展计划项目（2010CB227103）。

A preliminary experimental study on start-up behavior in nitrated gravity heat pipe

MENG Qiang¹, WU Yuting¹, XIONG Yaxuan², CUI Wujun¹, LIU Shanwei¹, MA Chongfang¹, LI Deying²

1 Key Laboratory of Enhanced Heat Transfer and Energy Conservation of Ministry of Education, Key Laboratory of Heat Transfer and Energy Conversion of Beijing Municipality, Beijing University of Technology, Beijing 100124, China;
2 Key Lab of HVAC, Beijing University of Civil Engineering and Architecture, Beijing 100044, China

Received:2013-10-16 Revised:2014-01-03 Online:2014-08-05 Published:2014-08-05
Supported by:
supported by the National Natural Science Foundation of China (51206004) and the National Basic Research Program of China (2010CB227103).

摘要/Abstract

摘要： 熔盐是一种高效传热工质，广泛应用于太阳能热发电传热、核反应堆传热、金属热处理的工业过程中。以配制的一种混合硝酸熔盐作为热管的传热工质，设计制造了管壳为316L不锈钢、外径Φ22 mm、壁厚2 mm、管壳长度980 mm的硝酸熔盐重力热管，并对硝酸熔盐重力热管的启动性能进行了初步实验研究，分析了混合硝酸盐重力热管的启动特性、稳定性以及倾角对热管启动的影响。然后将采用40 g混合硝酸盐工质的重力热管实验结果与采用40 g萘工质的重力热管的实验结果进行了对比。实验结果表明，混合硝酸盐热管的启动时间比萘热管的时间短，且启动后稳定性高于萘热管；分析认为，该混合硝酸盐的沸点在250℃左右，在倾角为50°时热管启动性能优于在30°、70°、90°时的情况。实验结果初步证明了混合硝酸盐作为热管工质的可行性。

关键词: 混合硝酸盐, 重力热管, 启动特性, 汽化, 相变, 传热

Abstract: Molten salt is a highly efficient heat transfer working fluid. It is widely used in central solar power, nuclear reactor, and heat treatment of metals. The startup process of gravity heat pipe with mixed nitrate as the working fluid was investigated experimentally by analyzing the startup characteristics, stability, and the influence of inclination angle on the startup behavior. The gravity heat pipe was fabricated with 316 L stainless steel, with outer diameter of 22 mm, thickness of 2 mm and total length of 980 mm. In order to explore the heat pipe start-up behavior of mixed nitrates, the experimental result with 40 g mixed nitrate working fluid is compared to that with 40 g naphthalene working fluid. The startup time of heat pipe with mixed nitrates is shorter than that with naphthalene and the heat pipe with mixed nitrates is superior to that with naphthalene in the stability. The boiling point of mixed nitrate is about 250℃. The startup characteristics at inclination angle of 50° are superior to those at 30°, 70° and 90°. The experiment shows that it is feasible for using mixed nitrates as the working fluid of heat pipe.

Key words: mixed nitrates, gravity heat pipe, start up behavior, vaporization, phase change, heat transfer

中图分类号:

TK124

孟强, 吴玉庭, 熊亚选, 崔武军, 刘闪威, 马重芳, 李德英. 硝酸盐重力热管启动特性初步实验研究[J]. 化工学报, 2014, 65(8): 2908-2913.

MENG Qiang, WU Yuting, XIONG Yaxuan, CUI Wujun, LIU Shanwei, MA Chongfang, LI Deying. A preliminary experimental study on start-up behavior in nitrated gravity heat pipe[J]. CIESC Journal, 2014, 65(8): 2908-2913.

参考文献 18

[1]	Zhuang Jun (庄骏), Zhang Hong (张红). Heat Pipe Technology and Engineering (热管技术及工程应用) [M]. Beijing: Chemical Industry Press, 2000: 67
[2]	Zhang Hong, Zhuang Jun. Research,development and industrial application of heat pipe technology in China [J]. Applied Thermal Engineering, 2003, 23 (9): 1067-1083
[3]	Grover G M, Cotter T P, Erikson G F. Structure of very high thermal conductance [J]. J.Apply Phys., 1964, 35 (6): 1990-1991
[4]	Cotter T P. Heat pipe startup dynamics//IEEE Conference Record of Thermionic Conversion Specialist Conference [C]. California, 1967: 344-346
[5]	Sockol P M, Forman R. Re-examination of heat pipe startup//IEEE Proceeding of 9th Thermionic Conversion Conference [C]. Miami Beach, 1970: 571-573
[6]	Busse C A. Theroery of the ultimate heat transfer limit of cylindrical heat pipe [J]. Int.J.Heat Transfer, 1973, 16 (1): 169-173
[7]	Levy E K, Chou S F. The sonic limit in sodium heat pipes [J]. J.Heat Transfer, 1973, 95 (2): 218-223
[8]	Tolubinsky V I, Shevchuk E N, Stambrovsky V D. Study of liquid metal heat pipes characteristics at startup and operation under gravitation//American Institute of Aeronautics and Astronautics. Proceeding 3rd International Heat Pipes Conference [C]. Palo Alto, 1978: 274-282
[9]	Tournier J M, Genk M S. A vapor flow model for analysis of liquid metal heat pipe startup from a frozen state [J]. Int.J.Heat Mass Transfer, 1996, 39: 3767-3780
[10]	Institute of Mechanics, Chinese Academy of Sciences. Heat Pipe Corpus [M]. Shanghai: Shanghai Science and Technology Service, 1976: 8-19
[11]	Zhao Weilin (赵蔚林). The research of sodium heat pipe internal mechanism [D]. Nanjing: Nanjing Institute of Chemical Industry, 1992
[12]	Zhuang Jun, Zhong Yang, Wang Rong, et al. Development of liquid-metal heat pipe heat exchanger//Proceeding of 9th International Heat Pipe Conference [C]. Albuquerque, New Mexico, 1995: 240-246
[13]	Feng Taqing,Tu Chuanjing. Liquid metal high temperature heat pipe structural material and working medium compatibility studies [J]. Energy Engineering, 1997 (2): 16-18
[14]	Zhao Weilin (赵蔚林). Study on characteristics and enhanced heat transfer for high temperature heat pipe fin [D]. Nanjing: Nanjing University of Technology, 2004
[15]	Ren Nan (任楠). Preparation and experimental study of thermal properties of mixed carbonates and molten salts with low melting point [D]. Beijing: Beijing University of Technology, 2011
[16]	Qu Yan (曲艳), Luan Tao (栾涛), Cheng Lin (程林). An experimental investigation of the effect of the inclination angle on thermal performance of axial grooved heat pipe [J]. Journal of Astronautics (宇航学报), 2006, 27 (3): 493-497
[17]	Feng Taqing (冯踏青). Theoretical and experimental research on liquid metal high temperature heat pipe [D]. Hangzhou：Zhejiang University, 1998
[18]	Wang Xinyu (王鑫煜), Xin Gongming (辛公明), Tian Fuzhong (田富中), Cheng Lin (程林). Start-up behavior of gravity heat pipe with small diameter [J]. CIESC Journal(化工学报), 2012, 63 (S1): 94-98

硝酸盐重力热管启动特性初步实验研究

A preliminary experimental study on start-up behavior in nitrated gravity heat pipe

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 18

相关文章 15

编辑推荐

Metrics

本文评价

[1]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[2]	程成, 段钟弟, 孙浩然, 胡海涛, 薛鸿祥. 表面微结构对析晶沉积特性影响的格子Boltzmann模拟[J]. 化工学报, 2023, 74(S1): 74-86.
[3]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[4]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[5]	陈爱强, 代艳奇, 刘悦, 刘斌, 吴翰铭. 基板温度对HFE7100液滴蒸发过程的影响研究[J]. 化工学报, 2023, 74(S1): 191-197.
[6]	刘明栖, 吴延鹏. 导光管直径和长度对传热影响的模拟分析[J]. 化工学报, 2023, 74(S1): 206-212.
[7]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[8]	江河, 袁俊飞, 王林, 邢谷雨. 均流腔结构对微细通道内相变流动特性影响的实验研究[J]. 化工学报, 2023, 74(S1): 235-244.
[9]	吴延鹏, 刘乾隆, 田东民, 陈凤君. 相变材料与热管耦合的电子器件热管理研究进展[J]. 化工学报, 2023, 74(S1): 25-31.
[10]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[11]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[12]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[13]	齐聪, 丁子, 余杰, 汤茂清, 梁林. 基于选择吸收纳米薄膜的太阳能温差发电特性研究[J]. 化工学报, 2023, 74(9): 3921-3930.
[14]	杨越, 张丹, 郑巨淦, 涂茂萍, 杨庆忠. NaCl水溶液喷射闪蒸-掺混蒸发的实验研究[J]. 化工学报, 2023, 74(8): 3279-3291.
[15]	陈天华, 刘兆轩, 韩群, 张程宾, 李文明. 喷雾冷却换热强化研究进展及影响因素[J]. 化工学报, 2023, 74(8): 3149-3170.