功能性润滑脂的开发进展

doi:10.11949/j.issn.0438-1157.20151095

化工学报 ›› 2015, Vol. 66 ›› Issue (8): 2878-2887.DOI: 10.11949/j.issn.0438-1157.20151095

功能性润滑脂的开发进展

曾晖^1,2, 李少飞^1,2, 刘涛^1,2, 周嘉明^1,2, 莫嘉文³, 纪红兵^1,2

1 中山大学化学与化学工程学院, 广州 510275;
2 中山大学惠州研究院, 惠州 516081;
3 广东工业大学轻工化工学院, 广州 510006

收稿日期:2015-07-08 修回日期:2015-07-23 出版日期:2015-08-05 发布日期:2015-08-05
通讯作者: 纪红兵
基金资助:
大亚湾区科技计划项目(201202004,201202017);广东省普通高校工程技术研究(开发)中心建设项目(2012gczxA001)。

Functional lubricating materials-engineering research and development progress of lubricating grease

ZENG Hui^1,2, LI Shaofei^1,2, LIU Tao^1,2, ZHOU Jiaming^1,2, MO Jiawen³, JI Hongbing^1,2

1 School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou 510275, Guangdong, China;
2 Huizhou Research Institute of Sun Yat-sen University, Huizhou 516081, Guangdong, China;
3 Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, Guangdong, China

Received:2015-07-08 Revised:2015-07-23 Online:2015-08-05 Published:2015-08-05
Supported by:
supported by the Dayawan Science and Technology Project (201202004, 201202017) and the Foundation for Engineering Technology Research (Development) Center of Higher Education of Guangdong (2012gczxA001).

摘要/Abstract

摘要：

先进的润滑材料技术是延长工业装备寿命、减少能耗极为重要的一个因素。润滑脂作为一种高效、长寿命润滑材料被越来越多应用到工业装备上,已经得到广泛重视。本文简述了功能性半固态润滑材料——润滑脂国内外研究的进展,包括产品性能、结构-性能、生产过程优化、合成理论、工艺设备等方面研究的发展和现状,对润滑脂的发展做出了展望。

关键词: 润滑脂, 摩擦, 吸附, 表面, 流变学

Abstract:

Advanced lubrication material is an important factor in the extend service life of industrial equipment and reduce energy consumption. As efficient lubricating material, lubricating grease has been paid more and more attention by academy and industry. This paper briefly review both domestic and international research progress of the functional semi-solid lubricants-lubricating grease, including research development and current situation of the product performance, structure-performance, production process optimization, synthesis theory and processing equipment research, prospect for the development of grease.

Key words: lubricating grease, friction, adsorption, surface, rheology

中图分类号:

TQ314.24

曾晖, 李少飞, 刘涛, 周嘉明, 莫嘉文, 纪红兵. 功能性润滑脂的开发进展[J]. 化工学报, 2015, 66(8): 2878-2887.

ZENG Hui, LI Shaofei, LIU Tao, ZHOU Jiaming, MO Jiawen, JI Hongbing. Functional lubricating materials-engineering research and development progress of lubricating grease[J]. CIESC Journal, 2015, 66(8): 2878-2887.

参考文献 92

[1]	Yu Xiaodong, Meng Xiuli, Jiang Hui, Lou Xiaozhong, Xiang Hongjun, Wang Junfeng, Liu Tonghai, Yang Changqing, Sun Xianzhu, Ji Weidong, Chen Dongliang. Research on lubrication performance of super heavy constant flow hydrostatic thrust bearing [J]. Advanced Science Letters, 2011, 4(8/9/10): 2738-2741.
[2]	Stokes J R, Macakova L, Chojnicka-Paszun A, de Kruif C G, de Jongh H H J. Lubrication, adsorption, and rheology of aqueous polysaccharide solutions [J]. Langmuir, 2011, 27(7): 3474-3484.
[3]	Dallavalle M, Sandig N, Zerbetto F. Stability, dynamics, and lubrication of MoS2 platelets and nanotubes [J]. Langmuir, 2012, 28(19): 7393-7400.
[4]	Al-Azizi A A, Eryilmaz O, Erdemir A, Kim S H. Effects of nanoscale surface texture and lubricant molecular structure on boundary lubrication in liquid [J]. Langmuir, 2013, 29(44): 13419-13426.
[5]	Cai Meirong, Liang Yongmin, Zhou Feng, Liu Weimin. Tribological properties of novel imidazolium ionic liquids bearing benzotriazole group as the antiwear/anticorrosion additive in poly(ethylene glycol) and polyurea grease for steel/steel contacts [J]. ACS Applied Materials & Interfaces, 2011, 3(12): 4580-4592.
[6]	Svahn F, Csillag S. Formation of low-friction particle/polymer composite tribofilms by tribopolymerization [J]. Tribology Letters, 2011, 41(2): 387-393.
[7]	Yang Jianqun, Liu Yong, Ye Zhuyu, Yang Dezhuang, He Shiyu. The effect of plasma nitriding on the tribology of perfluoropolyether grease-lubricated 2Cr13 steel couples in vacuum [J]. Tribology Letters, 2010, 40(1): 139-147.
[8]	Leonard B D, Sadeghi F, Evans R D, Doll G L, Shiller P J. Fretting of Wc/a-C: H and Cr2N coatings under grease-lubricated and unlubricated conditions [J]. Tribology Transactions, 2010, 53(1): 145-153.
[9]	Yao Lidan(姚立丹), Yang Haining(杨海宁). 2013 Investigation report on the production of lubricating grease of China [J]. Petroleum Products Application Research (石油商技), 2014, (5): 4-7.
[10]	Liang Weican(梁伟灿). Friction performance, mechanism & application of silicon oil based lubricating grease [D]. Guangzhou: Sun Yat-sen University, 2013.
[11]	Bao Tianjiao(鲍天骄), Li Fenglan(李凤兰), Wang Yan(王彦), Zhang Yan(张岩),Li Yangyang(李阳阳). Protective performance of polyurea lubricating grease used in marine environment [J]. Materials Protection(材料保护), 2014, (4): 32-34.
[12]	Wei Fangshi(魏芳仕), Wang Xiaolong(汪小龙). Sealing grease for sanitary valve and its preparation method [P]: CN, 201310499762.6. 2014-02-19.
[13]	Feng Kequan(冯克权), Miao Dongqin(缪冬琴). An oil resistant sealing grease and its preparing method [P]: CN, 201010537696.3. 2011-03-30.
[14]	Zhang Qunmin(张群敏), Xu Huapin(许华平). A kind of damping grease [P]: CN, 201210456012.6. 2014-05-21.
[15]	Cheng Jinshan(程金山), Liu Yachun(刘亚春), Wang Xin(王欣). Experimental study on vibration characteristics of low noise lubricating grease by bearing [J]. Lubrication Engineering (润滑与密封), 2013, (6): 101-104.
[16]	Li Tao(李涛), Guo Xiaochuan(郭小川), Zhong Yuanli(钟远利), Jiang Mingjun(蒋明俊). Influencing factors of low noise bearing greases [J]. Synthetic Lubricants(合成润滑材料), 2013, (1): 13-15.
[17]	Xie Xing(谢星). Experimental study on soap fiber structure affecting the performance of grease [D]. Harbin:Harbin Institute of Technology, 2008.
[18]	Li Xiaohong(李小红). Study on preparation and tribological properties of low noise polyurea grease [D]. Changsha:Central South University, 2007.
[19]	Qu Jianjun(曲建俊), Zhou Hongguang(周宏光), Zhao Zhqiang(赵志强), Liu Zhizhuo(刘志卓). Effects of PTFE particles on tribological properties of urea grease [J]. Lubricating Oil (润滑油), 2010, (3): 34-37.
[20]	Liu Weimin(刘维民). Application of nanoparticles in lubricants [J]. Tribology(摩擦学学报), 2003, (4): 265-267.
[21]	Wang Xianhui(王先会). Introduction of domestic grease additives [J]. Lubricating Oil (润滑油), 1998, (3): 58-59.
[22]	Huang Wenxuan(黄文轩). The type and application of grease additive [J]. Petroleum Products Application Research (石油商技), 2007, (6): 40-45.
[23]	Yu Wei(于唯), Dong Yuanhu(董元虎), Xu Zili(许自立), Wang Hao(王浩). Influence of extreme pressure anti-wear additive on performance of high temperature complex lithium-based grease [J]. Journal of Gansu Agricultural University (甘肃农业大学学报), 2013, (6): 174-180.
[24]	Wang Qingrui (王庆瑞), Wang Junming (王俊明), Li Weimin (李维民), Wang Xiaobo(王晓波). A study of derivatives of 2, 5-dimercapto-1, 3, 4-thiadiazoles as multifunctional additives in grease [J]. Lubrication Engineering (润滑与密封), 2012, (5): 13-17.
[25]	Chen Jie(陈杰), Ding Xu(丁旭), Sun Lihua(孙丽华), Yang Lü(杨绿). Effect of the different addition of nano-palygorskite on the properties of lubricating grease [J]. Guangdong Chemical Industry(广东化工), 2014, (8): 25-27.
[26]	Zhang Zhe(张哲), Chen Guoxu(陈国需), Zhao Litao (赵立涛), Chen Li(陈力), Li Jin(李进), Xia Di(夏迪). The tribological properties of the combined system of graphite and crystalline layered sodium disilicate as the additives in lithium greases [J]. Lubrication Engineering(润滑与密封), 2014, (1): 17-23.
[27]	Huang Weijiu(黄伟九), Peng Chengyun (彭成允), Wang Yingfang(王应芳), Zeng Ying(曾英). Study on tribological performance of nanometer zirconium oxide as lubrication additive [J]. J. Xiangtan Min. Inst. (湘潭矿业学院学报), 2001, (4): 28-31.
[28]	Zhang Xiaokai(张晓凯), Li Zhuo(李倬), Gao Yanqin(高艳青). Effect of several kinds of nano oxide additives on the performance of grease [J]. Petroleum Products Application Research(石油商技), 2014, (2): 40-43.
[29]	Choi Y, Lee C, Hwang Y, Park M, Lee J, Choi C, Jung M. Tribological behavior of copper nanoparticles as additives in oil [J]. Current Applied Physics, 2009, 9(2): E124-E127.
[30]	Sun Yuqiu(孙玉秋), Guo Xiaochuan(郭小川), Chen Boshui(陈波水), Jiang Mingjun(蒋明俊). Tribological and self repairing properties of LaF3 particle in lubricating grease [J]. Acta Scientiarum Naturalium Universitatis NeiMongol(内蒙古大学学报:自然科学版), 2005, (4): 437-440.
[31]	Wang Libo, Wang Bo, Wang Xiaobo, Liu Weimin. Tribological investigation of CaF2 nanocrystals as grease additives [J]. Tribology International, 2007, 40(7): 1179-1185.
[32]	Wang Peng(王鹏), Zhao Fangxia(赵芳霞), Zhang Zhenzhong(张振忠), Yang Jianghai(杨江海). Tribological properties and initial exploration mechanism of composite grease with bismuth nano-particles and ultrafine serpentine powders [J]. Acta Petrolei Sinica: Petroleum Processing Section(石油学报:石油加工), 2011, 27(4): 643-648.
[33]	Delgado M A, Valencia C, Sánchez M C, Franco J M, Gallegos C. Influence of soap concentration and oil viscosity on the rheology and microstructure of lubricating greases [J]. Industrial & Engineering Chemistry Research, 2006, 45(6): 1902-1910.
[34]	Delgado M A, Franco J M, Valencia C, Kuhn E, Gallegos C. Transient shear flow of model lithium lubricating greases [J]. Mechanics of time-dependent materials, 2009, 13(1): 63-80.
[35]	Sánchez M C, Franco J M, Valencia C, Gallegos C, Urquiola F, Urchegui R. Atomic force microscopy and thermo-rheological characterisation of lubricating greases [J]. Tribology Letters, 2011, 41(2): 463-470.
[36]	Mao Jingjing(毛菁菁), Cheng Xingguo(程型国), Zhang Suixin(张遂心). Study on relationship between rheological properties and microstructure for lithium complex grease [J]. Lubrication Engineering(润滑与密封), 2013, (12): 79-83.
[37]	Zeng Hui(曾晖), Zheng Yuanyuan(郑圆圆), Ji Hongbing(纪红兵). Effects of expanded parameters on microstructures of complex lithium lubricating grease [J]. Synthetic Lubricants(合成润滑材料), 2012, (1): 1-3.
[38]	Zeng Hui(曾晖), Chen Xiaonan(陈晓南), Chen Zhe(陈哲), Ji Hongbing(纪红兵). Influence of composition of complex lithium-based lubricant grease on the microstructure [J]. Lubrication Engineering(润滑与密封), 2011, (8): 42-47.
[39]	Paszkowski M, Olsztynska-Janus S. Grease thixotropy: evaluation of grease microstructure change due to shear and relaxation [J]. Industrial Lubrication and Tribology, 2014, 66(2): 223-237.
[40]	Zhao Gaiqing(赵改青), Zhang Suixin(张遂心), Wang Xiaobo(王晓波), Liu Weimin(刘维民). The relationships of thickener structures and properties of polyurea grease [J]. Lubrication Engineering(润滑与密封), 2012, (7): 5-9.
[41]	Yue Liyi(岳利义), Shen Tiejun(沈铁军), Liu Qinglian(刘庆廉). Influence of base stocks on thixotropy of lithium grease [J]. Synthetic Lubricants(合成润滑材料), 2011, (2): 1-3.
[42]	Zeng Hui(曾晖), Chen Zhe(陈哲), Ji Hongbing(纪红兵), Wu Yuesheng(吴粤生). Study on structure-activity relationship of lithium complex grease based on silicone oil [J]. Lubrication Engineering(润滑与密封), 2012, 37(2): 20-24.
[43]	Martin-Alfonso J E, Moreno G, Valencia C, Sánchez M C, Franco J M, Gallegos C. Influence of soap/polymer concentration ratio on the rheological properties of lithium lubricating greases modified with virgin LDPE [J]. Journal of Industrial and Engineering Chemistry, 2009, 15(5): 687-693.
[44]	Martin-Alfonso J E, Valencia C, Sánchez M C, Franco J M, Franco J M, Gallegos C. Rheological modification of lubricating greases with recycled polymers from different plastics waste [J]. Industrial & Engineering Chemistry Research, 2009, 48(8): 4136-4144.
[45]	Martin-Alfonso J E, Valencia C, Sánchez M C, Franco J M, Gallegos C. Evaluation of different polyolefins as rheology modifier additives in lubricating grease formulations[J]. Materials Chemistry and Physics, 2011, 128(3): 530-538.
[46]	Martin-Alfonso J E, Valencia C, Sanchez M C, Franco J M, Gallegos C. Influence of some processing variables on the rheological properties of lithium lubricating greases modified with recycled polymers [J]. International Journal of Materials & Product Technology, 2012, 43(1/2/3/4): 184-200.
[47]	Zhang Guoliang(张国亮), Ke Yangchuan(柯扬船), Yang Liyan (杨丽燕), Zhao Yangyang(赵洋洋), Du Shouqin(杜守琴). Thixotropy effects of nano-SiO2 composite grease fluids [J]. Acta Petrolei Sinica: Petroleum Processing Section (石油学报:石油加工), 2014, (2): 283-290.
[48]	Moreno G, Valencia C, Franco J M, Gallegos C, Diogo A, Bordado J C M. Influence of molecular weight and free NCO content on the rheological properties of lithium lubricating greases modified with NCO-terminated prepolymers [J]. European Polymer Journal, 2008, 44(7): 2262-2274.
[49]	Moreno G, Valencia C, de Paz M V, Franco J M, Gallegos C. Rheology and microstructure of lithium lubricating greases modified with a reactive diisocyanate-terminated polymer: influence of polymer addition protocol [J]. Chemical Engineering and Processing, 2008, 47(4): 528-538.
[50]	Xu Jun(许俊),Xu Nan(徐楠), Wang Xiaobo(王晓波), Liu Weimin(刘维民). Rheology of lithium greases under iced water and room air [J]. Tribology(摩擦学学报), 2013, (4): 406-412.
[51]	Yao Lidan(姚立丹), Yang Haining(杨海宁), Sun Hongwei(孙洪伟), Duan Qinhua(段庆华). Difference between the formation mechanisms of lithium complex grease and urea grease [J]. Acta Petrolei Sinica: Petroleum Processing Section (石油学报:石油加工), 2010, (5): 747-754.
[52]	Delgado M A, Valencia C, Sánchez M C, Franco J M, Gallegos C. Thermorheological behaviour of a lithium lubricating grease [J]. Tribology Letters, 2006, 23(1): 47-54.
[53]	Yu Wei(于唯), Dong Yuanhu(董元虎), Jia Wen(贾文), Fan Longfei(樊龙飞). Study on the processing technology of complex lithium grease in laboratory [J]. Lubrication Engineering(润滑与密封), 2013, 38(1): 92-95.
[54]	Xu Shimin(徐世敏), Chen Chonghui (陈崇会), Yao Lidan(姚立丹). Effect of after-process on properties of polyurea lubricating grease [J]. Synthetic Lubricants(合成润滑材料), 999 (2): 6-10.
[55]	Liao Shun(廖顺),Peng Xiang(彭翔),Zeng Hai(曾海). Investigation of the effect of polyurea grease process on product properties [J]. Petroleum Products Application Research(石油商技), 2013, (5): 54-59.
[56]	Guo Xiaochuan(郭小川), Jiang Mingjun(蒋明俊), Shi Hang(施航), Xiong Xiaolong(熊晓龙). Preparation of polyurea grease by premade thickener method [J]. Petroleum Processing and Petrochemicals(石油炼制与化工), 2012, (2): 71-75.
[57]	Li Li(李立). Influences of diurea-based grease composition and process on the performance of high-temperature hardening [D]. Tianjin: Tianjin University, 2011.
[58]	Zhang Suixin(张遂心). Studies on the relationgships of ingredients, structures and properties of polyurea grease [D]. Lanzhou: Northwest Normal University, 2011.
[59]	Ma Li(马丽), He Shaofei(何少飞). Improvement of manufacturing craft of continuous caster grease [J]. Synthetic Lubricants(合成润滑材料), 2008, (4): 4-5.
[60]	Zheng Xiongfeng(郑雄枫), Zeng Hu(曾晖), Ji Hongbing(纪红兵). Effect of homogeneous parameters on characteristics of complex lithium lubricating grease [J]. Synthetic Lubricants(合成润滑材料), 2008, (4): 4-5.
[61]	Ilowska J, Szwach I, Bereska B, Gniady J, Szmatola M, Semeniuk I. Drabik J, Kozdrach R. Complex greases produced in calorimetric reactor (Ⅱ): Effect of process parameters on properties of the greases [J]. Przemysl Chemiczny, 2013, 92(10): 1850-1854.
[62]	Chen Xinguo(陈新国), Zeng Hui(曾晖), Ji Hongbing(纪红兵). Study on thermal stability and oxidation resistance of bentonite grease [J]. Lubrication Engineering(润滑与密封), 2011, 36(2): 111-113.
[63]	Li Xiaohong(李小红), Mao Daheng(毛大恒), Feng Hao(俸颢). Research on reducing the work noise of polyurea grease [J]. Lubrication Engineering(润滑与密封), 2007, 32(12): 82-84.
[64]	Sun Yuanb(孙元碧), Fu Yu'e(付玉娥). Research on impact of naphthenic basic oil on lubricating grease properties [J]. Guangdong Chemical Industry(广东化工), 2013, (14): 61-62.
[65]	Jiang Mingjun(蒋明俊), Guo Xiaochuan(郭小川), Fu Hongrui(付洪瑞). Study on the preparation and performance of polyurea grease [J]. Petroleum Processing and Petrochemicals (石油炼制与化工), 2010, (4): 63-67.
[66]	Yang Wei(杨玮), Yao Lidan(姚立丹), Zheng Shanwei(郑善伟). A study on structure and mechanism of diurea grease [J]. Acta Petrolei Sinica: Petroleum Processing Section (石油学报:石油加工), 2000, (4): 38-42.
[67]	He Yifeng(何懿峰), Sun Hongwei (孙洪伟), Duan Qinghua (段庆华). Exploration of mechanism for synthesis of lubricating grease [J]. Acta Petrolei Sinica: Petroleum Processing Section (石油学报:石油加工), 2009, (S1): 98-102.
[68]	Li Gang(李刚). Study on film-forming mechanisms and tribological properties of grease in the harsh conditions [D]. Beijing:Tsinghua University, 2010.
[69]	Zhong Taigang(钟泰岗). Reflections on the synthesis of grease [J]. Petroleum Products Application Research(石油商技), 2011, (6): 22-25.
[70]	Zhu Tingbin(朱廷彬). The development trend of China grease industry and major problems [J]. Petroleum Products Application Research(石油商技), 2008, (1): 17-21.
[71]	Zhu Tingbin(朱廷彬), Li Qichang(李其昌). The discussion on the development of China's grease industry [J]. Petroleum Products Application Research(石油商技), 2010, (3): 5-8.
[72]	Adhvaryu A, Sung C, Erhan S Z. Fatty acids and antioxidant effects on grease microstructures [J]. Industrial Crops And Products, 2005, 21(3): 285-291.
[73]	Delgado M A, Sánchez M C, Valencia C, Franco J M, Gallegos C. Relationship among microstructure, rheology and processing of a lithium lubricating grease [J]. Chemical Engineering Research & Design, 2005, 83(A9): 1085-1092.
[74]	Shen Tiejun(沈铁军), Hu Minghua(胡明华), Liu Ruigang(刘瑞刚), Liu Qinglian(刘庆廉). The influence of static thermal degradation on microstructure and rheological properties of lithium-calcium base grease [J]. Tribology(摩擦学学报), 2011, (6): 581-586.
[75]	Liu Xiaobo(刘晓波). Discussion about effect of cooling methods on performances of lithium grease in brief [J]. Synthetic Lubricants(合成润滑材料), 2013, (3): 29-30.
[76]	Zeng Hui(曾晖), Ji Hongbing(纪红兵), Li Huihua(李辉华). A equipment for spraying device of saponification reaction [P]: CN, 201320153642.6. 2013-04-01.
[77]	Zhang Lianhui(张连惠), Sun Zongfei(孙宗飞), Sun Zongjuan(孙宗娟). Grease production equipment [P]: CN, 201020107467.3. 2011-03-16.
[78]	Zhang Lianhui(张连惠), Wang Haiyang(王海洋), Wang Ruixia(王瑞霞). A highly efficient energy-saving grease production device [P]: CN, 201020588900.X. 2011-07-06.
[79]	Xie Xiaopeng(谢小鹏), Chen Shulin(陈树林). A grease production equipment [P]: CN, ZL201110027154.6. 2011-07-27.
[80]	Xie Xiaopeng(谢小鹏), Chen Shulin(陈树林). A grease production equipment [P]: CN, 201120022752.X. 2011-1-21.
[81]	Zhou Donghai(周东海), Xu Jianguo(许建国). Grease auxiliary pipe reactor [P]: CN, 201120124040.9. 2011-11-02.
[82]	Zhang Qunmin(张群敏), Xu Huaping(许华平). A grease blending kettle [P]: CN, ZL201120083149.2. 2011-11-23.
[83]	Zhang Weiqian(张维谦). Grease reaction device [P]: CN, 201220255167.9. 2012-12-05.
[84]	Li Shaosong(李绍松), Feng Jiebing(冯洁冰), Xie Zhiqiao (谢志巧), Pan Zhenghua(潘正华), Lin Guojiu(林国就),Ruan Xueli(阮学礼),He Zhishen(何志森),Luo Maosheng(罗茂生). A kind of clean grease production with lower material pipe [P]: CN, 201220189090.X. 2012-12-05.
[85]	Wu Yan(吴艳), Zhao Hong(赵洪). Condensation reflux and tail gas collecting device for lubricating grease [P]: CN, 201320152299.3. 2013-09-25.
[86]	Li Xiaofu(李小福). Three roller machine [P]: CN, 201110415869.9. 2012-06-27.
[87]	Li Xiaofu(李小福). Three roller machine [P]: CN, 201120520607.4. 2012-09-12.
[88]	Xiao Weirong(肖伟荣). An adaptive three roller machine [P]: CN, 201110432912.2. 2012-05-02.
[89]	Xu Jianming(徐建明), Xu Xiaohua(徐晓花). A three roll machine [P]: CN, 201210281689.0. 2012-11-21.
[90]	Xu Jianming(徐建明), Xu Xiaohua(徐晓花). A three roll machine [P]: CN, 201220392544.3. 2012-8-9.
[91]	Ji Hongbing(纪红兵), Zeng Hui(曾晖), Zhen Xiongfeng (郑雄枫), Liang Weican(梁伟灿), Li Huihua(李辉华). A post processing device for lubricating grease [P]: CN, ZL201220041088.8. 2012-9-19.
[92]	Yang Zhengyu(杨正宇), Xu Shimin(徐世敏). Technology status and development prospect of grease in China [J]. Petroleum Products Application Research(石油商技), 2001, (5): 5-10.

功能性润滑脂的开发进展

Functional lubricating materials-engineering research and development progress of lubricating grease

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 92

相关文章 15

编辑推荐

Metrics

本文评价

[1]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[2]	吴馨, 龚建英, 靳龙, 王宇涛, 黄睿宁. 超声波激励下铝板表面液滴群输运特性的研究[J]. 化工学报, 2023, 74(S1): 104-112.
[3]	杨学金, 杨金涛, 宁平, 王访, 宋晓双, 贾丽娟, 冯嘉予. 剧毒气体PH₃的干法净化技术研究进展[J]. 化工学报, 2023, 74(9): 3742-3755.
[4]	杨越, 张丹, 郑巨淦, 涂茂萍, 杨庆忠. NaCl水溶液喷射闪蒸-掺混蒸发的实验研究[J]. 化工学报, 2023, 74(8): 3279-3291.
[5]	盛冰纯, 于建国, 林森. 铝基锂吸附剂分离高钠型地下卤水锂资源过程研究[J]. 化工学报, 2023, 74(8): 3375-3385.
[6]	张瑞航, 曹潘, 杨锋, 李昆, 肖朋, 邓春, 刘蓓, 孙长宇, 陈光进. ZIF-8纳米流体天然气乙烷回收工艺的产品纯度关键影响因素分析[J]. 化工学报, 2023, 74(8): 3386-3393.
[7]	杨欣, 彭啸, 薛凯茹, 苏梦威, 吴燕. 分子印迹-TiO₂光电催化降解增溶PHE废水性能研究[J]. 化工学报, 2023, 74(8): 3564-3571.
[8]	高燕, 伍鹏, 尚超, 胡泽君, 陈晓东. 基于双流体喷嘴的磁性琼脂糖微球的制备及其蛋白吸附性能探究[J]. 化工学报, 2023, 74(8): 3457-3471.
[9]	陈天华, 刘兆轩, 韩群, 张程宾, 李文明. 喷雾冷却换热强化研究进展及影响因素[J]. 化工学报, 2023, 74(8): 3149-3170.
[10]	陈吉, 洪泽, 雷昭, 凌强, 赵志刚, 彭陈辉, 崔平. 基于分子动力学的焦炭溶损反应及其机理研究[J]. 化工学报, 2023, 74(7): 2935-2946.
[11]	王杰, 丘晓琳, 赵烨, 刘鑫洋, 韩忠强, 许雍, 蒋文瀚. 聚电解质静电沉积改性PHBV抗氧化膜的制备与性能研究[J]. 化工学报, 2023, 74(7): 3068-3078.
[12]	赵志萍, 陈晨, 汤琼, 徐红, 刘雷, 董晋湘. 多己基萘/聚α-烯烃锂基润滑脂的流变学和摩擦学性能[J]. 化工学报, 2023, 74(6): 2555-2564.
[13]	王新悦, 王俊杰, 曹思贤, 王翠, 李灵坤, 吴宏宇, 韩静, 吴昊. 玻璃内包材界面修饰对机械应力诱导的单克隆抗体聚集体形成的影响[J]. 化工学报, 2023, 74(6): 2580-2588.
[14]	陈韶云, 徐东, 陈龙, 张禹, 张远方, 尤庆亮, 胡成龙, 陈建. 单层聚苯胺微球阵列结构的制备及其吸附性能[J]. 化工学报, 2023, 74(5): 2228-2238.
[15]	徐文超, 孙志高, 李翠敏, 李娟, 黄海峰. 静态条件下表面活性剂E-1310对HCFC-141b水合物生成的影响[J]. 化工学报, 2023, 74(5): 2179-2185.